Calculation of viscosity–temperature curves for glass obtained from four wastewater treatment plants in Egypt

This article establishes the relationship between the chemical composition, temperature and viscosity of glasses obtained from the four sludge treatment plants of urban and industrial wastewater from the Nile Delta in Egypt. In order to determine the working conditions of these glasses and their growth temperature, different techniques have been used: differential thermal analysis, hot stage microscopy and dilatometry. We used a prototype of hot stage microscopy, with the help of an image analysis programme developed in the present study. The chemical composition of major oxides sludge ranging from: SiO₂ (36–48 wt%), Al₂O₃ (9–16 wt%), CaO (5–25 wt%), P₂O₅ (1.5–11 wt%), and Fe₂O₃ (~9 wt%), this composition is close to a basalt rock, being necessary to incorporate some raw materials to adjust it to the basalt rock that has a good viscosity-temperature curve. The glass transition temperatures of the four glasses obtained vary between 650 and 725 °C and the growth occurs between 938 and 1,033 °C. We also obtained the viscosity–temperature curves with the aid of the hot stage microscopy that has allowed us to determine the working temperatures of the four glasses, ranging from 926 to 1,419 °C, depending on the type of forming process used.     

Synthesis, structure, and reactivity of new tetranuclear Ru-Hbpp-based water-oxidation catalysts

The preparation of three new octadentate tetranucleating ligands made out of two Ru-Hbpp-based units [where Hbpp is 3,5(bispyridyl)pyrazole], linked by a xylyl group attached at the pyrazolate moiety, of general formula (Hbpp)(2)-u-xyl (u = p, m, or o) is reported, together with its dinucleating counterpart substituted at the same position with a benzyl group, Hbpp-bz. All of these ligands have been characterized with the usual analytical and spectroscopic techniques. The corresponding tetranuclear ruthenium complexes of general formula {[Ru(2)(trpy)(2)(L)](2)(μ-(bpp)(2)-u-xyl)}(n+) [L = Cl or OAc, n = 4; L = (H(2)O)(2), n = 6] and their dinuclear homologues {[Ru(2)(trpy)(2)(L)](μ-bpp-bz)}(n+) [L = Cl or OAc, n = 2; L = (H(2)O)(2), n = 3] have also been prepared and thoroughly characterized both in solution and in the solid state. In solution, all of the complexes have been characterized spectroscopically by UV-vis and NMR and their redox properties investigated by means of cyclic voltammetry techniques. In the solid state, monocrystal X-ray diffraction analysis has been carried out for two dinuclear complexes {[Ru(2)(trpy)(2)(L)](μ-bpp-bz)}(2+) (L = Cl and OAc) and for the tetranuclear complex {[Ru(2)(trpy)(2)(μ-OAc)](2)(μ-(bpp)(2)-m-xyl)}(4+). The capacity of the tetranuclear aqua complexes {[Ru(2)(trpy)(2)(H(2)O)(2)](2)(μ-(bpp)(2)-u-xyl)}(6+) and the dinuclear homologue {[Ru(2)(trpy)(2)(H(2)O)(2)](μ-bpp-bz)}(3+) to act as water-oxidation catalysts has been evaluated using cerium(IV) as the chemical oxidant in pH = 1.0 triflic acid solutions. It is found that these complexes, besides generating significant amounts of dioxygen, also generate carbon dioxide. The relative ratio of [O(2)]/[CO(2)] is dependent not only on para, meta, or ortho substitution of the xylylic group but also on the concentration of the starting materials. With regard to the tetranuclear complexes, the one that contains the more sterically constrained ortho-substituted ligand generates the highest [O(2)]/[CO(2)] ratio.     

Spin crossover active iron(II) complexes of selected pyrazole-pyridine/pyrazine ligands

This review begins with a brief introduction to pyrazole and to spin crossover. The focus then moves to a detailed consideration of the synthesis and magnetic properties of structurally characterized iron(II) spin crossover (SCO) active complexes of pyrazole- and pyrazolate-based ligands that also contain at least one pyridine or pyrazine unit within the ligand motif. The syntheses and crystallization methods reported in the original publications are emphasized in this review. The reason for this is that these factors often affect the exact nature of the final product, including the amount and nature of the crystallization solvent molecules present and/or what polymorph is obtained, and hence they can impact strongly on the SCO properties of the resulting materials, as can be seen in this review.     

Fast Electrochemical Characterization of Historical Glasses Using Carbon Screen‐Printed Electrodes and Ultrasonic Assisted Sampling

A new method for lead oxide (PbO) analysis in glasses, using a carbon screen printed electrode (SPE) is proposed. A suspension of the powdered glass sample in nitric acid is prepared using an ultrasonic probe, 100 µL of slurry are deposited on the SPE and the voltammetric measurement is carried out. Structural information of PbO in the glass matrix is obtained by CV. Lead quantification is performed by DPV. In the best conditions a LOD of 2.30 wt% of PbO was obtained. The method has been applied with good results in the analysis of historical glasses samples.     

Effect of additives on the performance of Dyckerhoff cement,Class G,submitted to simulated hydrothermal curing

Stability of Dyckerhoff cement Class G partially substituted (15 mass%) by metakaolin (MK), silica fume (SF) and ground granulated blast-furnace slag (BFS) was investigated after 7 days of curing under standard and two different autoclaving conditions. Mercury intrusion porosimetry, X-ray diffraction analysis and combined thermogravimetric–differential scanning calorimetry were used to evaluate pore structure development, compressive strength and their dependence on the type of additives in relation to the particular phase composition. Hydrothermal curing led to the formation of α-C₂SH and jaffeite, mostly in the case of referential samples and compositions with addition of slowly reacting BFS. Whilst modest hydrothermal curing (0.6 MPa, 165 °C) favoured formation of α-C₂SH, larger amounts of jaffeite were determined after curing at the highest used pressure and temperature (2.0 MPa, 220 °C). Undesired transformation of primary hydration products was prevented especially by addition of highly reactive and very fine SF. Particular composition attained the best pore structure characteristics and compressive strength after curing at 0.6 MPa and 165 °C. Formation of more stable phases with C/S ratio close to 1 was proved by wollastonite formation during DSC analyses. More severe conditions of curing, however, led to the significant deterioration of microstructure and strength of corresponding sample, probably due to the formation of trabzonite, killalaite and zoisite. Considering the values of hydraulic permeability coefficient and compressive strength, replacement of cement by MK improved significantly the properties of cement when compared with the referential as well as with other blended compositions under the mentioned curing conditions.     

Computational study of the thermal decomposition and the thermochemistry of allyl ethers and allyl sulfides

In spite of the several experimental and computational studies on the thermal decomposition of allyl ethers and allyl sulfides, there are still disagreements on aspects of the reaction mechanism, such as the true nature of the transition states and the grade of synchronicity of the reactions. This work presents a computational study of the gas-phase thermolysis reaction of allyl ethers and allyl sulfides substituted at α-carbon, at the M05-2X/6-31+G(d,p) level of theory and a temperature range from 586.15 to 673.15 K. The substituent groups were methyl, ethyl, n-propyl, i-propyl, allyl, benzyl and acetonyl. It was found that the sulfides react faster than the homologous ethers and that the substituent groups with the capacity of delocalize charge increase the reaction rate. Through natural bond orbital calculations, the transition states were characterized. The synchronicities and atomic charges of the studied reactions were determined. A computational study at the G3 level of theory on the thermochemistry of allyl ethers and sulfides was also carried out.     

Protective effect of mitochondrially targeted antioxidant MitoQ on oxidatively stressed fibroblasts

3T3 and VH10 cells were subjected to oxidative damage by hydroxyl radicals generated from Cu(II) ions and ascorbate. The presence of reactive oxygen and nitrogen species in cells was determined using fluorescent dyes. MitoQ—a mitochondrially targeted antioxidant—was examined to prevent cell death and was compared with trolox as a reference standard serving as an antioxidant. MitoQ at lower concentrations (up to 500 nM) prevented damage of mitochondria and thereby increased viability of cells. However, at higher concentrations (over 500 nM) MitoQ decreased the viability of both strains of cells. The last observation indicates that the application of MitoQ should be evaluated also from the point of its cell-destructive potential.     

Multielement standards in routine reactor neutron activation analysis

The application of multielement standards (MES) in routine neutron activation analysis brings a whole range of advantages. This paper deals with the experience obtained during many years of application of these MES. Nine of these MES contain a total of 50 elements in suitable combinations and concentrations; thus, the determination of most of the common elements by NAA can be carried out simultaneously. This refers to the following elements: Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Br, Rb, Sr, Mo, Ag, Cd, In, Sb, Te, Cs, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, W, Re, Au, Hg, Th and U. For the determination of the remaining elements such as Zr, Ta, Ir etc., single element standards (SES) are used.     

Observation of a Doppler broadening of the 4438 keV gamma-line of12C in processes12C(n,n′γ)12C and9Be(α, nγ)12C

A Doppler broadening is described of the 4438 keV spectral gamma-line observed by means of a Ge(Li) detector during the deexcitation of nuclei of¹²C in an inelastic scattering¹²C(n, n′γ)¹²C using an²⁴¹Am−Be source as well as during the reaction⁹Be(α, nγ)¹²C taking place in the Am−Be source. The FWHM of the spectral line is equal to (90±4) keV in the latter reaction and (64±8) keV in the former process. Experimental values agree well with theoretical ones. Presented at the Instrumental Activation Analysis Conference, IAA 79, June 4–8, 1979, Klučenice, Czechoslovakia.     

Sb(III) and Sb(V) separation and analytical speciation by a continuous tandem on-line separation device in connection with inductively coupled plasma atomic emission spectrometry

A sensitive, precise and automated non-chromatographic method for Sb(III) and Sb(V) analytical speciation based on a continuous tandem on-line separation device in connection with inductively coupled plasma-atomic emission (ICP-AES) detection is proposed. Two on-line successive separation steps are included into this method: a continuous liquid-liquid extraction of Sb(III) with ammonium pyrrolidine dithiocarbamate (APDC) into methylisobuthylketone (MIBK), followed by direct stibine generation from the organic phase. Both separation steps are carried out in a continuous mode and on-line with the ICP-AES detector. Optimization of experimental conditions for the tandem separation and ICP-AES detection are investigated in detail. Detection limits for Sb(III) were 3 ng.mL^–1 and for Sb(V) 8 ng.mL^–1. Precisions observed are in the range ± 5%. The proposed methodology has been applied to Sb(III) and Sb(V) speciation in sea-water samples.