Structural and transport properties of Sn–Mg alloys

In this work, the structural and transport properties of Mg-doped Sn-based alloys have been investigated. The temperature-dependent transport and structural properties of Sn–Mg alloys were investigated for five different samples (Pure Sn, Sn-1.0 wt% Mg, Sn-2.0 wt% Mg, Sn-6.0 wt% Mg and Pure Mg). Scanning electron microscopy (SEM), X-ray diffraction and energy dispersive X-ray analysis measurements were carried out in order to clarify the structural properties of the samples. It was found that the samples had tetragonal crystal symmetry, except for pure Mg which had hexagonal crystal symmetry. We also found that the cell parameters changed slightly with the addition of Mg element. The SEM micrographs of the samples showed that they had smooth surfaces with a clear grain boundary. The electrical and thermal conductivity of the samples were measured by four-point probe and the radial heat flow method, respectively. The electrical resistivity of the samples increased almost linearly with the increasing temperature. The thermal conductivity values ranged between 0.60 and 1.00 W/Km, while they decreased slightly with temperature and increased with Mg composition. The thermal conductivity values of the alloys were in between the values of pure Sn and Mg. The thermal conductivity results of the alloys were compared with other available results, and a good agreement was seen between the results. In addition, the temperature coefficients of electrical resistivity and thermal conductivity were determined; these were independent of the composition of the alloying elements.     

Chiral 2-(2-hydroxyaryl)alcohols (HAROLs) with a 1,4-diol scaffold as a new family of ligands and organocatalysts

Efficient and modular syntheses of chiral 2-(2-hydroxyaryl)alcohols (HAROLs), novel 1,4-diols carrying one phenolic and one alcohol hydroxyl group, have been developed which led to generation of a small library of structurally diverse HAROLs in enantiomerically pure form. Of the different HAROLs examined, a HAROL based on the indan backbone exhibited the highest activity and enantioselectivity in the 1,2-addition of certain organometallic compounds to aldehydes in the presence of Ti(OⁱPr)₄ (up to 97% y, 88% ee) and performed as a hydrogen-bond donor organocatalyst in the Morita-Baylis-Hillman reaction, promoted by trialkylphosphines.     

Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A constructive approach to examination timetabling based on adaptive decomposition and ordering

In this study, we investigate an adaptive decomposition and ordering strategy that automatically divides examinations into difficult and easy sets for constructing an examination timetable. The examinations in the difficult set are considered to be hard to place and hence are listed before the ones in the easy set in the construction process. Moreover, the examinations within each set are ordered using different strategies based on graph colouring heuristics. Initially, the examinations are placed into the easy set. During the construction process, examinations that cannot be scheduled are identified as the ones causing infeasibility and are moved forward in the difficult set to ensure earlier assignment in subsequent attempts. On the other hand, the examinations that can be scheduled remain in the easy set. Within the easy set, a new subset called the boundary set is introduced to accommodate shuffling strategies to change the given ordering of examinations. The proposed approach, which incorporates different ordering and shuffling strategies, is explored on the Carter benchmark problems. The empirical results show that the performance of our algorithm is broadly comparable to existing constructive approaches.