Application of Compton scattering normalization method to the analysis of uranium ore

Compton scattering normalization method is described for the analysis of uranium bearing ore respect to the usage of K X-rays of uranium. Minimum backscatter energy is obtained at a scatter angle of 180° with fixed point source geometry and collimation in appropriate conclusions. By normalizing the intensities of uranium K-lines to the Compton profile in the measured spectra, the results do not depend on several measuring parameters such as primary radiation intensity, matrix, composition, mass of the sample and measuring time. The method presented in this study indicates the convenience of uranium K-lines analysis for thick targets with an adequate measuring geometry.     

Vibrational Spectroscopic Studies on the Hofmann Type Clathrates: M(1,6-diaminohexane)Ni(CN) 4 .G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3- or 1,4-dichlorobenzene)

New Hofmann-diaminohexane(dahxn)-type clathrates of the form M(1,6-dahxn)Ni(CN)₄.G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3 or 1,4-dichlorobenzene) were prepared inpowder form and their infrared spectra are reported. The spectral data suggest that these compounds are similar in structure to those of the Hofmann-diam-type clathrates. Their structure consists of planar polymeric layers, {M–Ni(CN)₄}, formedfrom Ni(CN)₄ anions coordinated to the bridging 1,6-diaminohexane molecules bound directly to the metal (M). The M atoms are bound to four N atoms of the CN ions and, the Ni atoms are surrounded by four C atoms of the CN groups in a square-planar layer.     

Study on labeling conditions of125I-synkavit by the iodogen method

Labeling conditions of synkavit (2-methyl-1,4-naphthoquinol disodium phosphate) with iodine-125 have been studied. In this study, labeling temperature, reaction time, successive using of iodogen coated tubes, iodogen amount and synkavit concentrations have been determined to get optimum conditions for maximum labeling. Final results showed that when the labeling temperature, reaction time, synkavit concentration, and iodogen amount were, at room temperature, 15 min (in the case of successive using of three iodogen coated tubes), 2 mg ml^–1 and 5 mg, respectively; labeling yield was 90% and specific activities of the order of 555 GBq mmol^–1 (15 Ci mmol^–1) have been obtained.     

Radiometric titration based on colloidal and slow precipitate formation

Fluoride ions and, in about 0.005M concentration, tungstate ions form gelatinous precipitates, poorly soluble in water, with calcium ions. The radiometric determinations of the above ions are based on these reactions. Accurate radiometric determination can be carried out only if the gelatinous precipitate formed during titration can be properly separated from the solution. It has been found that in the case of fluoride ions the application of crystalline, easily filtrable Ca(COO)₂·H₂O or CaCO₃, and in the case of tungstate ions the application of CaWO₄ precipitate improves the filtration properties of⁴⁵CaF₂ and⁴⁵CaWO₄, respectively, formed during titration, whereby the radiometric determinations of the above ions become possible. Titrations were carried out with 0.05M and 0.005M CaCl₂ solutions, labelled with⁴⁵Ca.     

Analysis of aerosols at the bosporus bridge of Istanbul

Air samples collected at the second Bosporus bridge of Istanbul which carries a heavy traffic load between Asia and Europe, were analyzed for 22 elements by the INAA method. Pb, Cd and Fe concentrations in the samples were determined by AAS. Iron concentrations were used as a cross check between the two methods. In order to define the enrichment factors for the elements in the bridge area, a sample collected from our university campus which can be considered as a rural site, was also analyzed. Differences were observed especially for Br, Al, Mg, Ti, Cu and Na between the two sites. Based on the results of the samples from the bridge, we got a value of 0.58(16) for the Br/Pb-ratio.     

On the construction of least favourable pairs of distributions

Summary Convex programming techniques were used by Witting and Krafft in [4] in order to reduce a testing problem for composite hypotheses to one for simple hypotheses. This is realized in terms of least favourable pairs of distributions, which represent the solution of the dual of a suitable program. Without further assumptions on the hypotheses, however, the results, derived that way (cf. Baumann [1], Österreicher [6] and Kusolitsch and Österreicher [5]), are of less practical impact. This is due to the fact that in this case the least favourable pairs depend on the level of the testing problem. Conditions avoiding this, were given by Huber and Strassen in [3]. These conditions make use of 2-alternating capacities in the sense of Choquet. The present paper offers a rather general principle of constructing the least favourable distribution in the case, when one of the two hypotheses is simple. This method works also for the local variation model and the Prohorov neighbourhood model in the case of monotone likelyhood ratio. For simple cases—subsuming the gross error model and the total variation model, for which the solution was given by Huber in [2]—a least favourable pair is obtained by using the mentioned technique of construction two times successively.     

Determination of D- and L-amino acids in biological samples by two-dimensional column liquid chromatography

Summary A two-dimensional, column liquid chromatographic system is used for the determination of the D- and L-enantiomers of amino acids in biological samples. Separation of the amino acids is first on ion-exchange column by gradient elution with a sodium citratesodium chloride buffer. Enantioseparation is by subsequent injection of 3 l heart-cuts of the individual amino acids onto a second column with a chiral crown ether stationary phase. Finally, fluorescence detection is after post-column labelling of the amino acids using ano-phthalaldehyde-2-mercaptoethanol reagent solution. The high separation power and selectivity of the system allow processing of complex samples with hardly any additional treatment and the determination of small quantities of D-amino acids in the presence of excess L-form. Applicability of the system is illustrated by the determination of D- and L-aspartate, serine, glutamate and alanine in various complex biological samples, such as protein hydrolysates, urine and biotechnological and food samples. Data are given on detectability, repeatability and linearity.     

Spectrothermal studies of 1,10-phenanthroline complexes of Co(II), NI(II), Cu(II) and Cd(II) orotates

The 1,10-phenanthroline (phen) complexes of Co(II), Ni(II), Cu(II) and Cd(II) orotates were synthesized and characterized by elemental analysis, magnetic susceptibility, spectral methods (UV-vis and FTIR) and thermal analysis techniques (TG, DTG and DTA). The Co(II), Ni(II), Cu(II) and Cd(II) ions in diaquabis(1,10-phenanthroline)metal(II) diorotate octahedral complexes [M(H₂O)₂(phen)₂](H₂Or)₂·nH₂O (M=Co(II), n=2.25; Ni(II), n=3; Cu(II) and Cd(II), n=2) are coordinated by two aqua ligands and two moles of phen molecules as chelating ligands through their two nitrogen atoms. The monoanionic orotate behaves as a counter ion in the complexes. On the basis of the first DTG_max, the thermal stability of the hydrated complexes follows the order: Cd(II), 68°C 68°C     

Trimethylsilylcyanid als Umpolungsreagens,VI. Anionische 1,4- O→C-Silylgruppen-Umlagerung

Trimethylsilyl Cyanide — A Reagent for Umpolung, VI. Anionic 1,4-O→C-Silyl Group Rearrangement The adducts 6 from substituted acroleins 5a – f and trimethylsilyl cyanide form the anions 6 _A on deprotonation at −78°C, which are silylated by trimethylsilyl chloride to 7 or (and) 8 in positions 3 or (and) 1. On warming up to room temperature, 6a _A and 6b _A undergo smoothly 1,4-O→C-silyl group rearrangements to form 13a _A and 13b _A which can be trapped by silylation. 6c – d _A decompose on warming up. Triethylsilyl instead of trimethylsilyl groups decelerate the rearrangement appreciably. Structure and configuration of the different products are determined.     

Investigation of potential-sensitive fluorescent dyes for application in nitrate sensitive polymer membranes

The applicability of various potential-sensitive dyes (PSD) for optical sensing of anions is reported. Specifically, nitrate-responsive polymer membranes have been developed which are composed of a plasticized polymer, an anion exchange catalyst, and a fluorescent dye. On exposure to nitrate, the fluorescence intensity of such membranes increases, while the wavelengths of the excitation and emission maxima remain virtually unchanged. The membranes typically are 2–4 μm thick and exhibit highest sensitivity to nitrate in the 2 to 200 mgl^–1 range. Signal changes on exposure to 100 mmol/l nitrate can be as high as +300%. The detection limit is 0.2 mgl^–1. The cationic PSD octadecyl acridine organe was tested in combination with a tin-organic and an indium-organic anion carrier rather than with tridodecylmethylammonium chloride, but both carriers were found to display no improved selectivity. Received: 2 December 1995 / Revised: 28 March 1996 / Accepted: 5 April 1996