Transition absorption as a mechanism of surface photoelectron emission from metals

Transition absorption of a photon by an electron passing through a boundary between two media with different permittivities is described both classically and quantum mechanically. Transition absorption is shown to make a substantial contribution to photoelectron emission at a metal/semicon‐ductor interface in nanoplasmonic systems, and is put forth as a possible microscopic mechanism of the surface photoelectric effect in photodetectors and solar cells containing plasmonic nanoparticles.

     

The odd log-logistic Topp–Leone G family of distributions: heteroscedastic regression models and applications

We introduce a new class of distributions and provide a comprehensive treatment of its mathematical properties. The maximum likelihood method is discussed to estimate the parameters of the new model by means of Monte-Carlo simulation study. The heteroscedastic regression models with long-term survival are introduced to model data sets with the non homogeneity of the error variances in the presence of cured individuals. The potentiality of the proposed models is illustrated by means of four real data sets.     

Determination of methoxsalen in dosage forms by high-performance liquid chromatography

Summary A new, rapid, sensitive, and specific method for the determination of methoxsalen in dosage forms using HPLC has been developed. methoxsalen is extracted in chloroform, evaporated on a water bath, and the residue is redissolved in ethanol. A standard solution of khellin (internal standard) in ethanol is added, and injected. A plot of peak height ratio (methoxsalen/internal standard) vs. concentration of methoxsalen gave a straight line (r=0.998). The column used was a stainless steel, 3.8 mm×30 cm, and the mobile phase was methanol: water (6040) at a flow rate of 2 cm³/min. Retention times for methoxsalen and khellin were 3.45 and 9.6 min, respectively. This method was found superior to the spectrophotometric assay in that no interference was encountered from structurally similar compounds or from coloring agents used in some commercial methoxsalen products.     

Ti/TiO2 indicator electrodes formed by plasma electrolytic oxidation for potentiometric analysis

Ti/TiO₂ indicator electrodes were prepared by plasma electrolytic oxidation (PEO) method in the tetraborate electrolyte and were used for potentiometric indication of chemical reactions of different types and for analysis of surface and industrial wastewaters on the example of potentiometric determination of alkalinity and chloride. The electrodes formed at current densities of 0.05, 0.1, 0.15 and 0.2 A/cm² are different in composition, surface morphology and electroanalytical properties. The electrodes formed at a current density of 0.05 A/cm² exhibit the highest pH-sensitivity and generate the highest analytical signal at the equivalence point in the acid–base and precipitation titrations. The maximum analytical signal at the equivalence point, exceeding in magnitude the analytical signal, obtained by classical Pt electrode in oxidation–reduction and complexometric titrations generates PEO layers formed at a current density of 0.05 A/cm² and a platinum-modified nanoparticles. The results of the potentiometric titration of the surface and technogenic waters using as indicator Ti/TiO₂ electrodes are comparable with the conventionally used glass electrode (to determine alkalinity) and Ag electrode (to the determine chloride) and the results of visual titration. The advantage of the obtained metal oxide systems is the ability to determine two hydrochemical parameters due to their multifunctionality and opportunity to work with a single electrode. In addition, these sensors offer some analytical characteristics such as sensitivity, good reproducibility, high mechanical stability and a simple preparation procedure.     

Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions

The biodegradable metals, including magnesium (Mg), are a convenient alternative to permanent metals but fast uncontrolled corrosion limited wide clinical application. Formation of a barrier coating on Mg alloys could be a successful strategy for the production of a stable external layer that prevents fast corrosion. Our research was aimed to develop an Mg stable oxide coating using plasma electrolytic oxidation (PEO) in silicate-based solutions. 99.9% pure Mg alloy was anodized in electrolytes contained mixtures of sodium silicate and sodium fluoride, calcium hydroxide and sodium hydroxide. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), contact angle (CA), Photoluminescence analysis and immersion tests were performed to assess structural and long-term corrosion properties of the new coating. Biocompatibility and antibacterial potential of the new coating were evaluated using U2OS cell culture and the gram-positive Staphylococcus aureus (S. aureus, strain B 918). PEO provided the formation of a porous oxide layer with relatively high roughness. It was shown that Ca(OH)₂ was a crucial compound for oxidation and surface modification of Mg implants, treated with the PEO method. The addition of Ca²⁺ ions resulted in more intense oxidation of the Mg surface and growth of the oxide layer with a higher active surface area. Cell culture experiments demonstrated appropriate cell adhesion to all investigated coatings with a significantly better proliferation rate for the samples treated in Ca(OH)₂-containing electrolyte. In contrast, NaOH-based electrolyte provided more relevant antibacterial effects but did not support cell proliferation. In conclusion, it should be noted that PEO of Mg alloy in silicate baths containing Ca(OH)₂ provided the formation of stable biocompatible oxide coatings that could be used in the development of commercial degradable implants.     

The Rb7Bi3−3xSb3xCl16 Family: A Fully Inorganic Solid Solution with Room-Temperature Luminescent Members

Low-dimensional ns²-metal halide compounds have received immense attention for applications in solid-state lighting, optical thermometry and thermography, and scintillation. However, these are based primarily on the combination of organic cations with toxic Pb²⁺ or unstable Sn²⁺, and a stable inorganic luminescent material has yet to be found. Here, the zero-dimensional Rb₇Sb₃Cl₁₆ phase, comprised of isolated [SbCl₆]³⁻ octahedra and edge-sharing [Sb₂Cl₁₀]⁴⁻ dimers, shows room-temperature photoluminescence (RT PL) centered at 560 nm with a quantum yield of 3.8±0.2 % at 296 K (99.4 % at 77 K). The temperature-dependent PL lifetime rivals that of previous low-dimensional materials with a specific temperature sensitivity above 0.06 K⁻¹ at RT, making it an excellent thermometric material. Utilizing both DFT and chemical substitution with Bi³⁺ in the Rb₇Bi_3−3xSb_3xCl₁₆ (x≤1) family, we present the edge-shared [Sb₂Cl₁₀]⁴⁻ dimer as a design principle for Sb-based luminescent materials.     

Plasmonic finite-thickness metal–semiconductor–metal waveguide as ultra-compact modulator

We propose a plasmonic waveguide with semiconductor gain material for optoelectronic integrated circuits. We analyze properties of a finite-thickness metal–semiconductor–metal (F-MSM) waveguide to be utilized as an ultra-compact and fast plasmonic modulator. The InP-based semiconductor core allows electrical control of signal propagation. By pumping the core we can vary the gain level and thus the transmittance of the whole system. The study of the device was made using both analytical approaches for planar two-dimensional case as well as numerical simulations for finite-width waveguides. We analyze the eigenmodes of the F-MSM waveguide, propagation constant, confinement factor, Purcell factor, absorption coefficient, and extinction ratio of the structure. We show that using thin metal layers instead of thick ones we can obtain higher extinction ratio of the device.     

"Reported, but still unknown." A closer look into 3,4-bis- and 3,4,5-tris(trifluoromethyl)pyrazoles

Straightforward practical synthetic approaches to 3,4-bis- and 3,4,5-tris(trifluoromethyl)pyrazoles have been developed. The key step of the both syntheses is a transformation of the carboxylic group in a pyrazole core into the trifluoromethyl group by sulfur tetrafluoride. The elaborated synthetic protocols allow gram-scale preparation of the target products. The obtained compounds are comprehensively characterized by means of crystallographic analysis, determination of pK(a) values and fluorescence measurements.     

Molecular dynamics results for the radial distribution functions of highly asymmetric hard sphere mixtures

Molecular dynamics (MD) results for the radial distribution functions of mixtures of large and small hard spheres are reported for size ratios whose (large/small) values are 1, 2.5, 5, 7.5, and 10 in the region where the concentration of the large spheres is very small. The MD contact values of these functions are compared with formulae due to Boublik, Mansoori, Carnahan, Starling, Leland, Grundke, and Henderson, Viduna and Smith, Henderson, Trokhymchuk, Woodcock, and Chan, as well as new formulae that are considered here. The new formulae give good agreement for the large–small contact values and reasonably good agreement for the large–large contact values. The Viduna–Smith formula is satisfactory for the small–small contact value and quite reasonable for the small–large contact value. Undoubtedly, further improvements are possible. These results give insight into what may be called the colloidal limit, where the size ratio is exceedingly large while the concentration of the large spheres is exceedingly small, and into the passage to this limit.