A sequential injection system for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples.

A sequential injection methodology for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples is proposed. A single manifold is used for the determination of the three analytes, and the same protocol sequence allows the sequential determination of calcium and magnesium (the sum corresponds to the water hardness). The determination of both metals is based on their reaction with cresolphtalein complexone; mutual interference is minimized by using 8-hydroxyquinoline for the determination of calcium and ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) for the determination of magnesium. Alkalinity determination is based on a reaction with acetic acid, and corresponding color change of Bromcresol Green. Working ranges of 0.5 - 5 mg dm(-3) for Ca, 0.5 - 10 mg dm(-3) for Mg, and 10 - 100 mg HCO3- dm(-3), for alkalinity have been achieved. The results for water samples were comparable to those of the reference methods and to a certified reference water sample. RSDs lower than 5% were obtained, a low reagent consumption and a reduced volume of effluent have been accomplished. The determination rate for calcium and magnesium is 80 h(-1), corresponding to 40 h(-1) per element, while 65 determinations of alkalinity per hour could be carried out.     

On the existence and the stability of solutions for higher-order semilinear Dirichlet problems

We investigate the existence and stability of solutions for higher-order two-point boundary value problems in case the differential operator is not necessarily positive definite, i.e. with superlinear nonlinearities. We write an abstract realization of the Dirichlet problem and provide abstract existence and stability results which are further applied to concrete problems.     

Radiation heterogeneous processes of14C-acetic acid adsorbed in Na-Montmorillonite

This research addresses itself to the study of the mechanism of the acetic acid decarboxylation in Na-Montmorillonite exposed to ionizing radiation. The results obtained indicated that the decarboxylation reaction is enhanced several times by the irradiation. This behavior is probably due to an oxidation reaction at the edges of the clay. Also it is by energy transfer from the clay to adsorbed molecules by an interaction of non-equilibrium charge carriers with the adsorbed molecules.     

Minicolumn field sampling--preconcentration of trace zinc from seawater and its laboratory detection by flow injection flame atomic absorption spectrometry.

A simple field sampling-preconcentration method for zinc determination in seawater is described. Seawater was collected in situ by pumping it through a minicolumn packed with a chelating resin (Chelite P) connected to a field flow preconcentration system (FFPS). These packed minicolumns retain the dissolved zinc, and once are loaded with the analyte, they are returned to the laboratory where they are sequentially inserted into a flow injection system for on-line zinc elution with diluted hydrochloric acid and flame atomic absorption spectrometric detection. A factorial design has been used to optimize the FFPS and the flow injection elution process. The proposed method has a linear calibration range from 0.07 to at least 9.4 microg L(-1) of zinc, with a detection limit of 0.02 microg L(-1) and a throughput of 26 samples h(-1). Validation was carried out against certified reference water samples. This procedure has been successfully applied to the determination of Zn in seawater samples from Galicia (Spain).     

Volumetric and refractive properties of binary mixtures containing 1,3-dioxolane and isomeric chlorobutanes

The relation between refractive index deviations and excess volumes for binary mixtures formed by a cyclic ether and a haloalkane has been tested using several methods: refractive index mixing rules and equations of state. Refractive index deviations, excess volumes and molar refractions have been calculated from experimental data of refractive indices and densities at two temperatures 298.15 and 313.15 K. Results obtained have been discussed in terms of intermolecular interactions. Refractive indices were compared with those predicted by several mixing rules. Excess volumes have also been correlated using several cubic equations of state and finally a relation between parameter b from equations of state and molar refraction has been provided.     

Electronic properties of polyoxometalates: a DFT study of alpha/beta-[XM(12)O(40)](n-) relative stability (M=W, Mo and X a main group element)

Keggin heteropolyanions [XM(12)O(40)](n-) have various isomeric structures, alpha and beta being the most common. Conventionally, the alpha structure appears to be the most stable, but calculations carried out at the DFT level for X = P(V), Si(IV), Al(III), As(V), Ge(IV), and Ga(III) and M = W(VI) and Mo(VI) show that this stability depends on several factors, particularly on the nature of the heteroatom (X) and the total charge of the cluster. In this paper, we apply the clathrate model to the Keggin molecule to carry out a fragment-interaction study to elucidate when and why the traditional relative stability of various isomers can be inverted. The fully oxidized anions that have inverted the traditional stability trend in this series are [AlW(12)O(40)](5-) and [GaW(12)O(40)](5-), both of which contain a third-group heteroatom and an overall charge of -5. beta-isomers are always more easily reduced than alpha-isomers. This experimental observation suggests that reduction favors the stability of beta-isomers and one of the most important results of this study is that the alpha/beta inversion is achieved in most cases after the second reduction. The alpha- and beta-isomers may have different properties because the energy of the LUMO, a symmetry-adapted d(xy)-metal orbital, is different.     

A study of thin surface layers by multilayer Mössbauer spectroscopy /MMS/

A stacking Mössbauer technique, MMS has been applied for studying thin surface layers. The surface layers formed on the⁵⁷Fe film in aqueous solutions of corrosion inhibitors, such as zinc phosphate and barium metaborate, and in distilled water was studied by this method. It has been found that the corrosion is much slower in the presence of zinc phosphate and barium metaborate. XPS analysis suggests the formation of a mixed iron zinc phosphate on the surface of the⁵⁷Fe film after corrosion in a zinc phosphate solution.