NDDO MO calculations

The Roby version of the NDDO MO method has been analysed by performing extensive calculations on several molecular systems employing a minimum basis set of STO-3G functions. The effect of using uniform scale factors and those derived from theS-expansion technique, for electron repulsion integrals has also been studied. At the all-electron level, the method, with all its refinements, does not appear promising. The all-valence NDDO MO method after correction byS-expansion, however, yields results which are in good agreement withab initio results. The performance of this scheme is comparable to that of the simplifiedab initio method of Brown and Roby.     

Stability of a flat gas-liquid interface containing nonidentical spheres to gas transport: toward an explanation of particle stabilization of gas bubbles

It is shown that a flat interface between a soluble gas and a liquid that contains an arbitrary number of partially wetting nonidentical spheres is linearly stable to slight perturbations caused by fluctuations in the gas volume. Stability is proved by showing that the rate of change of the volume of the gas with curvature of the interface is positive in the neighborhood of the equilibrium state of zero interface curvature. Physically, the volume fluctuations induce fluctuations in the curvature of the interface that would naturally lead to dissolution of gas into the liquid in the case of positive curvature and entry of gas into the bubble in the case of negative curvature, either of which restores equilibrium. This result may possibly explain the unusual long-term stability of gas bubbles covered by colloidal particles in the recent experiments of Du et al. (Du, Z.; Bilbao-Montoya, M. P.; Binks, B. P.; Dickinson, E.; Ettelaie, R.; Murray, B. S. Langmuir 2003, 19, 3106).     

Long-time behavior of the angular velocity autocorrelation function for a fluid of rough spheres

According to hydrodynamical and mode-coupling theories, the angular velocity autocorrelation function decays at long times as ₀(t/10^–14 sec)^–5/2. For rough spheres under the conditions reported here, the quantity ₀ is predicted to be 262. The molecular dynamics studies presented here yield a long-time tail of the form 230(t/10^–14 sec)^–2.38. The disagreement between theory and computer results probably arises from statistical error intrinsic to the computations.The authors are indebted to the National Science Foundation and the Computer Center of the University of Minnesota for financial support of the research reported here.     

Influence of structural factors on degradation product formation: Primary pyrolysis products of poly(acyl sulfides) investigated by direct pyrolysis mass spectrometry

Thermal degradation of two poly(acyl sulfide) polymers, poly(adipoyl sulfide) (PADS) and poly(terephthaloyl sulfide) (PTS) was investigated by direct pyrolysis mass spectrometry (DPMS). The structures of pyrolysis products detected in the DPMS analysis of both PADS and PTS indicate that the thermal degradation takes place mainly through a loss of carbon monoxide and carbonyl oxysulfide leading to the formation of cyclics. In the case of PADS, linear products with thioacid end groups were formed through hydrogen transfer reactions. In the case of PTS, almost equal proportions of linear products with phenyl end groups and cyclic products were formed. The mechanism of formation of degradation products has also been addressed.     

Synthesis and solid state studies on Mb2Sb2O7 and (Mn1−xCdx)2Sb2O7 pyrochlores

Pyrochlore oxides of the type Mn₂Sb₂O₇ and (Mn_1?xCd_x)₂Sb₂O₇ have been synthesized by high-temperature solid state reactions and characterized by X-ray diffraction and chemical analysis. X-Ray diffraction studies showed that the compound Mn₂Sb₂O₇ has a rhombohedrally distorted pyrochlore structure. In the solid solutions (Mn_1?xCd_x)₂Sb₂O₇, the phases with x ≥ 0.6 are cubic. Magnetic and ¹²¹Sb Mössbauer studies indicate that all the Mn and Sb are present in the +2 and +5 state occupying A and B sites, respectively, in the pyrochlore structure. Electrical measurements indicate that the compounds are insulators or semiconductors exhibiting p-type behavior. The stoichiometry and probable cause of the rhombohedral distortion in Mn₂Sb₂O₇ and solid solutions are discussed.     

Investigations on the preparation,oxidation and reduction reactions of thiophosphoryl fluoride

Pure thiophosphoryl fluoride has been prepared by the fluorination of thiophosphoryl chloride by sodium fluoride in acetonitrile medium. Oxidation of this phosphoryl fluoride by acidified chloramine-T ruptures the phosphorus-sulphur bond and oxidises the sulphur present to the hexavalent state. Anhydrous hydrogen iodide reduces the sulphur to hydrogen sulphide and phosphorus to the trivalent state.     

Carbamoylmethyl sulfoxides as novel extractants for actinides

The present paper describes a novel type of extractant for actinides called bis (dioctylcarbamoylmethyl) sulfoxide which neither contains phosphorus nor entails the addition of tributyl phosphate as phase modifier for extraction. This extractant, abbreviated as CMSO, has been found to be freely soluble in dodecane and to form no third phase even with concentrations of nitric acid as high as 10M. The distribution ratios for the extraction of Am(III), Pu(IV) and U(VI) at trace levels have been found to be 13, 220 and 11, respectively, from 5M nitric acid using 0.2M CMSO in dodecane and those for back-extraction have been found to be 2×10^–4, 8×10^–3 and 5×10^–2 using 0.01M nitric acid, 0.1M oxalic acid and 0.35M sodium carbonate, respectively. Similar distribution ratios were obtained with the recycled extractant. Extraction was found to be very rapid. Eu(III) and Sr(II) were found to be moderately extracted with distribution ratios of 2 and 0.77, respectively, while the extraction of Cs(I) was negligible (K_D=0.005).     

Conformational isomerism and weak molecular and magnetic interactions in ternary copper(II) complexes of [Cu(AA)L']ClO4.nH2O, where AA = L-phenylalanine and L-histidine, L' = 1,10-phenanthroline and 2,2-bipyridine, and n = 1 or 1.5: synthesis, single-crystal X-ray structures, and magnetic resonance investigations

Weak molecular and magnetic exchange interactions in ternary copper(II) complexes, viz., [Cu(L-phe)(phen)(H(2)O)]ClO(4) (1), [Cu(L-phe)(bpy)(H(2)O)]ClO(4) (2), and [Cu(L-his)(bpy)]ClO(4).1.5H(2)O (3), where L-phe = L-phenylalanine, L-his = L-histidine, phen = 1,10-phenanthroline, and bpy = 2,2'-bipyridine, have been investigated. Single-crystal X-ray structures reveal that complex 2 crystallizes in a monoclinic space group P2(1), with unit cell parameters a = 7.422(7) A, b = 11.397(5) A, c = 12.610(2) A, beta = 102.10(5) degrees, V = 1043.0(11) A(3), Z = 2, R = 0.0574, and R(w) = 0.1657. Complex 3 crystallizes in a monoclinic space group C2, with a = 18.834(6) A, b = 10.563(4) A, c = 11.039(3) A, beta = 115.23(2) degrees, V = 1986.6(11) A(3), Z = 4, R = 0.0466, and R(w) = 0.1211. Molecules of 2, in the solid state, are self-assembled via weak intra- and intermolecular pi-pi stacking and H-bonding interactions. Molecules of 3 exhibit intermolecular dimeric association with the Cu.Cu separation being 3.811 A. X-ray structures and (1)H NMR studies reveal conformational isomerism in both solid and liquid states of complexes 1 and 2. The aromatic side chain of L-phe in 1 and 2 adopts either a "folded" (A) or an "extended" (B) conformation. Variable-temperature (1)H NMR and spin lattice relaxation measurements point out interconversion between conformations A and B at temperatures above 323 K. The change in molecular conformation induces a change in the electron density at the site of copper and band gap energy between HOMO and LUMO orbitals. Interestingly, in spite of paramagnetic nature, complexes 1 and 2 are amenable for both EPR and (1)H NMR spectroscopic studies. Single-crystal EPR spectra of 2 in three orthogonal planes are consistent with three-dimensional magnetic behavior. Intramolecular exchange dominates the dipolar interactions. The EPR spectra of 3 correspond to weak magnetic interactions between associated dimeric units. The structural and magnetic resonance investigations together reveal that the weak pi-pi stacking interactions are the electronic pathways for magnetic interactions in 1-3.     

Extraction behaviour of uranium,zirconium and ruthenium with gamma-irradiated sulfoxides and tri-n-butyl phosphate

The extraction, scrubbing and stripping behaviour of uranium, zirconium and ruthenium with di-n-hexyl and di-n-octyl sulfoxides in Solvesso-100 and tri-n-butyl phosphate (TBP) in shell Sol-T irradiated by various gamma doses (0–169 Mrads) have been investigated. 2M HNO₃ was used for extraction and scrubbing and 0.01M HNO₃ for stripping purposes. Results indicate that the extraction of uranium with TBP increases and that with sulfoxide decreases with dose. This is reflected in their corresponding scrubbing percentages too. The stripping percentage of uranium with TBP decreases with dose while the reverse is the case with sulfoxide. The extraction of zirconium with TBP increases sharply with dose as compared to sulfoxides. The extraction scrubbing and stripping of ruthenium remain almost unaffected by dose both in the case of TBP and sulfoxides. These results lead to much higher overall decontamination factors for uranium with respect to zirconium as well as ruthenium with irradiated sulfoxides as compared to those with irradiated TBP.     

Solvent extraction of neptunium(IV) from nitric acid solutions by sulphoxides and their mixtures

Studies have been performed on the liquid-liquid extraction of neptunium from nitric acid solutions by di-n-hexylsulphoxide (DHSO) di-no-octylsulphoxide (DOSO) and di-iso-amylsulphoxide (DISO) and their mixtures over a wide range of conditions. At a given strength of the extractant, extraction of Np(IV) increases initially rapidly with increase in the acid concentration; at high acidities, above 8M HNO₃, the extraction decreases. Under otherwise identical conditions, extraction increases with an increase in the extractant concentration. The species extracted would appear to be Np(NO₃)₄·2(R₂SO). A mixture of two extractants extracts more than the sum of the extractions due to the individual components at concentrations corresponding to those of the mixture. After loading the organic phase with uranium(VI), extractability of Np(IV) becomes considerably lower. The diminution in extraction with increase in temperature is small. A comparison of the extraction behaviour of Np(IV) with those of Pu(IV), U(VI) and some associated fission products has been made.