Constrained melting of graphene-based phase change nanocomposites inside a sphere

Journal of Thermal Analysis and Calorimetry - In the present work, the melting behavior of a fatty acid-based phase change material (PCM) with the addition of functionalized graphene nanoplatelets...     

A quantitative extraction method for the determination of trace amounts of both butyl- and phenyltin compounds in sediments by gas chromatography-inductively coupled plasma mass spectrometry

A simple and reliable extraction method was developed for quantitative determination of both butyl- and phenyltin compounds in sediments by capillary gas chromatography combined with inductively coupled plasma mass spectrometry (GC-ICP-MS). Both types of organotin compounds were extracted quantitatively from sediment by mechanical shaking into tropolone-toluene and HCl-methanol. After phase separation and pH adjustment, these organotins were ethylated with sodium tetraethylborate. The method was evaluated by analyzing PACS-2 and NIES No. 12 sediment certified reference materials. The dibutyltin (DBT; 1.14 +/- 0.02 micrograms g-1) and tributyltin (TBT; 1.01 +/- 0.04 micrograms g-1) values observed in PACS-2 sediment closely matched the certified values (DBT, 1.09 +/- 0.15; TBT, 0.98 +/- 0.13 microgram g-1 as tin). The monobutyltin (MBT) value was higher (0.62 +/- 0.02 microgram g-1) by more than two fold over the reference value (0.3 microgram g-1 as tin). The concentrations of TBT (0.18 +/- 0.04 microgram g-1) and triphenyltin (TPhT; 0.0099 +/- 0.002 microgram g-1) in the NIES No. 12 sediment were also in good agreement with the certified and reference values of TBT (0.19 +/- 0.03 microgram g-1 as compound) and TPhT (0.008 microgram g-1 as compound), respectively. Recoveries of TBT, tripentyltin (TPeT) and TPhT from spiked sediments were satisfactory (TBT, 102 +/- 3.4%; TPrT, 96 +/- 3.4%; TPhT, 99 +/- 8.5%). The detection limits as tin were in the range 0.23-0.48 ng g-1 for a 0.5 g sample size. It is also noteworthy that clean-up of the extract is not necessary because of the superior selectivity of ICP-MS detection. The present method was successfully applied to marine sediment samples.     

Chemical diversity and anti-proliferative activity of marine algae

The chemical diversity of three macroalgae (Ulva reticulata, Sargassum wightii, Gracilaria sp) were determined using the GC-MS method with principal component analysis (PCA) and their potential efficacy against human pathogens and cervical carcinoma cells evaluated using MTT bioassay method. Our results showed that >30 metabolites were detected in three seaweeds, among these, steroids and fatty acids are the most dominant chemical group that highly contributes to discriminate this species. The PCA of GC-MS mass spectral variables showed a clear discrimination between three different species based on the phytochemical diversity of seaweeds. The extracts of U. reticulata exhibited anti-microbial activity with Pseudomonas aeruginosa (6.00?mm) and showed potential anti-proliferative activity against the HeLa cells (IC₅₀ 37?µmol/L) at concentration 1–50?µM treatment. Results of this study concluded that PCA analysis of mass spectral variables could be utilized as a reliable tool for species discrimination and chemotaxonomic classification of seaweeds.     

Ten marker compounds-based comparative study of green tea and guava leaf by HPTLC densitometry methods: antioxidant activity profiling

High-performance thin layer chromatography (HPTLC) method for the separation and quantitative determination of ten markers (catechins, flavonoids, and phenolics) in different extracts of green tea and guava leaf has been developed and the antioxidant activity profiles of the two plant extracts have been determined. Ten marker compounds have been resolved using silica gel 60 F(254) plates, toluene/acetone/formic acid (5:4:1 v/v/v) for markers 1-6, and toluene/ethyl acetate/formic acid/methanol (3:3:0.8:0.2 v/v/v/v) for markers 7-10 as the mobile phases. The high-performance thin layer chromatography densitometry was performed at wavelengths of 282 and 285 nm for the markers 1-6 and 7-10, respectively. Potent antioxidant activity and the presence of phenolics and flavan-3-ols has been observed for the guava leaf extracts suggestive of its use as an alternate economical source of antioxidants over green tea--the well-established food additive/nutraceutical agent.     

Simulated moving bed chromatography for the separation of enantiomers

Simulated moving bed (SMB) chromatography, a continuous multi-column chromatographic process, has become one of the preferred techniques for the separation of the enantiomers of a chiral compound. Several active pharmaceutical ingredients, including blockbuster drugs, are manufactured using the SMB technology. Compared to single column preparative chromatography, SMB separations achieve higher productivity and purity, while reducing the solvent consumption. The SMB technology has found applications both at small and large scales. Design methods have been developed for robust operation and scale-up, using data obtained from analytical experiments. In the last few years, rapid developments have been made in the areas of design, improved process schemes, optimization and robust control. This review addresses these developments, as well as both the fundamentals of the SMB science and technology and some practical issues concerning the operation of SMB units. Particular emphasis is placed on the consolidation of the “triangle theory”, a design tool that is used both in the academia and industry for the design of SMB processes.     

Determination of calcium in wine using reconfigurable PSoC based spectrophotometer

This paper discusses the determination of calcium in wine samples using Programmable Systemon-Chip (PSoC) microcontroller. This embedded system uses a PSoC CY8C27443 integrated circuit (IC) spectrophotometer as core unit, high intensity orange LED as light source and photodiode as light detector having the relative spectral sensitivity above 93% in the range of 550–650 nm. This single-chip design reduces hardware complexity and increases the stability by miniaturizing the device. The instrument obeys Beer’s law up to the concentration of 160 mg/L. Coloring agent Methylthymol Blue (MTB) forms a complex with calcium in presence of alkali (pH ≈ 12); the complex exhibits maximum absorbance at 610 nm. The spectral range, concentration of MTB and pH of the solution at which the reaction is carried out are optimized. The results of the developed method are compared statistically with those obtained by a conventional method by applying Student’s t-test and F-test. The regression analysis reveals excellent correlation (R ² = 0.9998) and regression line equation obtained for that line Y = 0.29 + 0.99X with standard error of 0.62. It can be concluded that the obtained results are in good agreement with the reference method at 95% confidence level.     

Ruthenium‐Catalyzed Oxidant‐Free Allylation of Aromatic Ketoximes with Allylic Acetates at Room Temperature

Substituted aromatic ketoximes reacted efficiently with allylic acetates in the presence of {[RuCl₂(p‐cymene)]₂} and AgSbF₆ in 1,2‐dichloroethane at ambient temperature, providing ortho‐allyl aromatic ketoximes in a highly regioselective manner without an oxidant. In the reaction, the acetate group of allyl acetate acts as a base to activate the C?H bond of aromatics. Later, ortho‐allyl aromatic ketoximes were converted into ortho‐allyl aromatic ketones in the presence of HCl.     

Direct and Single‐Molecule Visualization of the Solution‐State Structures of G‐Hairpin and G‐Triplex Intermediates

We present the direct and single‐molecule visualization of the in‐pathway intermediates of the G‐quadruplex folding that have been inaccessible by any experimental method employed to date. Using DNA origami as a novel tool for the structural control and high‐speed atomic force microscopy (HS‐AFM) for direct visualization, we captured images of the unprecedented solution‐state structures of a tetramolecular antiparallel and (3+1)‐type G‐quadruplex intermediates, such as G‐hairpin and G‐triplex, with nanometer precision. No such structural information was reported previously with any direct or indirect technique, solution or solid‐state, single‐molecule or bulk studies, and at any resolution. Based on our results, we proposed a folding mechanism of these G‐quadruplexes.     

Characterisation of semiconducting V2O5–Bi2O3–TeO2 glasses through ultrasonic measurements

Tellurite containing vanadate (50−x)V₂O₅–xBi₂O₃–50TeO₂ glasses with different bismuth (x=0, 5, 10, 15, 20 and 25 wt%) contents have been prepared by rapid quenching method. Ultrasonic velocities (both longitudinal and shear) and attenuation (for longitudinal waves only) measurements have been made using a transducer operated at the fundamental frequency of 5 MHz in the temperature range from 150 to 480 K. The elastic moduli, Debye temperature, and Poisson’s ratio have been obtained both as a function of temperature and Bi₂O₃ content. The room temperature study on ultrasonic velocities, attenuation, elastic moduli, Poisson’s ratio, Debye temperature and glass transition temperature show the absence of any anomalies with addition of Bi₂O₃ content. The observed results confirm that the addition of Bi₂O₃ modifier changes the rigid formula character of TeO₂ to a matrix of regular TeO₃ and ionic behaviour bonds (NBOs). A monotonic decrease in velocities and elastic moduli, and an increase in attenuation and acoustic loss as a function of temperature in all the glass samples reveal the loose packing structure, which is attributed to the instability of TeO₄ trigonal bipyramid units in the network as temperature increases. It is also inferred that the glasses with low Bi₂O₃ content are more stable than with high Bi₂O₃ content.