A mild, rapid and highly regioselective ring-opening of epoxides and aziridines with acetic anhydride under solvent-free conditions using ammonium-12-molybdophosphate

A highly regioselective ring opening of epoxides and aziridines can be carried out efficiently with acetic anhydride to form the acetates of the corresponding 1,2-diols and 2-amino-alcohols, respectively, using ammonium-12-molybdophosphate (AMP) as a heterogeneous catalyst, at room temperature, in the absence of solvent.     

Sensitive and selective spectrophotometric method for the determination of trace amounts of osmium with 1,2,3-indanetrione monothiosemicarbazone

Summary Sensitive and Selective Spectrophotometric Method for the Determination of Trace Amounts of Osmium with 1,2,3-Indanetrione Monothiosemicarbazone A simple, sensitive and selective spectrophotometric method has been developed for the determination of osmium using 1,2,3-indane-trione monothiosemicarbazone (ITMT). The method is based on the colour reaction between ITMT and osmium(VIII) in hydrochloric acid (0.32–0.60 M) medium. The calibration graph for measurement at 440 nm is linear in the range 1.4–33.6g of osmium per 25ml, with a molar absorptivity of 6.43×10⁴l·mole^–1·cm^–1. The effect of interferences has been studied and the method applied to the determination of osmium in synthetic samples whose composition correspond to osmiridium or syserkite, with good results.     

Effect of sodium metasilicate on natural flotability of coal

The effect of the quantity of sodium metasilicate and conditioning time in one set of experiments, and the effect of the solution concentration of sodium metasilicate, added at the same dosage and conditioning time to coal slurry, on flotability of a typical Indian coal in another set of experiments are studied. Two sets of 3² full factorial experiments are carried out to assess the effects of the aforementioned variables. The generated data are analyzed quantitatively and explained qualitatively. At 0.1% (w/v) solution concentration of solution added (0.02 g/kg) and 8 min conditioning time, sodium metasilicate acted as activator for kaolinite, whereas at 1.0% (w/v) solution concentration (0.2 g/kg), it acted as dispersant. The best observed condition of depressant is obtained at an added concentration of 10.0% (w/v, 0.2 g/kg) and 8 min conditioning time. The desired effect of the sodium metasilicate can be achieved by controlling its quantity, solution concentration added, and conditioning time.     

Neutral and ionic aluminum,gallium, and indium compounds carrying two or three terminal ethynyl groups

The syntheses of the ionic compounds [Li(+).2 dioxane (2,6-iPr(2)C(6)H(3)N(SiMe(3))Al(C triplebond CSiMe(3))(3))(-)].0.75 dioxane (1), [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))Ga(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (2), and [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))In(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (3) by the reaction of the corresponding organo metal chloride with LiC triplebond CSiMe(3) are reported. The neutral ethynyl compounds Br-Al(C triplebond CtBu)(2).2 THF (4), Cl-Ga(C triplebond CtBu)(2).THF (5), Cl-In(C triplebond CtBu)(2).2 THF (6), Al(C triplebond CtBu)(3).C[N(Me)CMe](2) (7), Ga(C triplebond CtBu)(3).dioxane (8), and In(C triplebond CtBu)(3).NEt(3) (9) have been obtained in good yields from the reaction of AlBr(3), GaCl(3), and InCl(3) with LiC triplebond CtBu in the presence of a Lewis base. Compound 7 is the first heterocyclic carbene substituted ethynyl derivative. Aluminum and gallium compounds with three terminal ethynyl groups Al(C triplebond CPh)(3).NMe(3) (10) and Ga(C triplebond CPh)(3).NMe(3) (11) have been prepared by the reaction of AlH(3).NMe(3) or GaH(3).NMe(3) with three equivalents of phenylethyne. All the above-mentioned compounds have been structurally studied. In compound 1 the lithium ion is coordinated to the three terminal ethynyl groups, whereas in compounds 2 and 3 the lithium is coordinated to the solvent (dioxane). Compound 8 crystallizes as a coordination polymer with dioxane molecules bridging the individual gallium units.     

Simultaneous Determination of Olanzapine and Fluoxetine by HPLC

A rapid, specific reversed phase HPLC method has been developed for simultaneous determination of olanzapine and fluoxetine in their formulations. Chromatographic separation of these two pharmaceuticals was carried out on an Inertsil C₁₈ reversed phase column (150 mm × 4.6 mm, 5 μm) with a 40:30:30 (v/v/v) mixture of 9.5 mM sodium dihydrogen phosphate (pH adjusted to 6.8 ± 0.1 with triethylamine), acetonitrile and methanol as mobile phase. The flow rate 1.2 mL min⁻¹ and the analytes are monitored at 225 nm. Paroxetine was used as internal standard. The assay results were linear from 25 to 75 μg mL⁻¹ for olanzapine (r ² ≥ 0.995) and 100–300 μg mL⁻¹ for fluoxetine (r ² ≥ 0.995), showed intra- and inter-day precision less than 1.0%, and accuracy of 97.7–99.1% and 97.9–99.0%. LOQ was 0.005 and 0.001 μg mL⁻¹ for olanzapine and fluoxetine, respectively. Separation was complete in less than 10 min. Validation of the method showed it to be robust, precise, accurate and linear over the range of analysis.     

Spectral studies on VO ions in potassium thiourea bromide single crystals using EPR and optical absorption spectroscopy

Electron paramagnetic resonance (EPR) studies have been carried out on VO²⁺ ions doped in single crystals of ferroelectric material, potassium thiourea bromide (PTB) at room temperature and in the temperature range 103–343 K on X-band MW frequency. An isotropic octet spectrum characteristic of VO²⁺ ion was obtained due to the fast re-orientation of the VO²⁺ in PTB lattice, which exhibits glassy nature at certain range around room temperature. The temperature dependant EPR spectra of VO²⁺ ions in this host lattice has been attributed to the occurrence of multiple phase transitions due to the combined environment effects of KBr and thiourea materials in the single crystal. From the optical absorption spectrum, the crystal field splitting parameter Dq, tetragonal parameters Ds and Dt have been evaluated and discussed.     

Synthesis and characterization of new epoxy and cyanate ester resins

New epoxide and cyanate ester resins with an aromatic ester backbone namely 1,3-[di-(4-glycidyloxy diphenyl-2,2^′-propane)]-isophthalate (DGDPI) and 1,4-[di-(4-cyanato diphenyl-2,2^′-propane)]-terephthalate (DCDPT) were synthesized and the intermediates were characterized by IR, 1H-/¹³C-NMR spectroscopic methods. The cured products from DGDPI and DHDPI exhibited higher T_g compared with standard epoxy system. The increase in the T_g may be due to the cyanate ester and rigid aromatic backbones present in the curing system.     

A single amino acid Gly-tag enables metal-free protein purification

Analytically pure proteins are indispensable for diverse applications, including therapeutics. Here, we report a methodology where a single amino acid, glycine, enables metal-free protein purification. This robust platform is enabled by a Gly-tag resin for site-specific capture, enrichment, and release through chemically triggered C–C bond dissociation by resonance-assisted electron density polarization.

Gly-tag resin precisely captures and releases a protein with one glycine at the N-terminus. The user-friendly protocol delivers analytically pure protein free of metal contaminants.     

A simple, efficient and highly selective deprotection of t-butyldimethylsilyl (TBDMS) ethers using silica supported sodium hydrogen sulfate as a heterogeneous catalyst

t-Butyldimethylsilyl (TBDMS) ethers have been efficiently and selectively deprotected using silica supported sodium hydrogen sulfate (NaHSO₄·SiO₂) as a heterogeneous catalyst at room temperature to regenerate the parent alcohols in high yields.