Aggregation and adsorption of reactive dyes in the presence of an anionic surfactant on mesoporous aminopropyl silica

A surface tension technique was used to determine the critical aggregation concentration (cac) of a yellow and a red dye in relation to the presence of the anionic surfactant sodium dodecylbenzene sulfonate (DBS) and to temperature changes in buffered aqueous solutions. The cac values of the yellow dye increase from 25 to 45 degrees C (from 41.37 to 50.32 mg L-1) and decrease from 45 to 55 degrees C (from 50.32 to 38.72 mg L-1). The cac values for the red dye/DBS aggregates decrease (from 124.52 to 88.50 mg L-1) from 25 to 55 degrees C. Adsorption of the two dyes onto a mesoporous aminopropyl silica (Sil-NH2) was also studied. The adsorption of the yellow dye increases with an increase in temperature from 25 to 55 degrees C. In the presence of DBS the adsorption on Sil-NH2 for the yellow dye decreases, and for the red dye increases from 25 to 55 degrees C. Adsorptions occurred below and above the cac of the anionic dyes/DBS aggregates. Adsorption of the dyes onto Sil-NH2 fitted well to the Langmuir, Freundlich, and Redlich-Peterson adsorption models. However, in the presence of DBS, only the Freundlich model fit the experimental adsorption data at low dye concentrations (less than 400 mg L-1). In this case, the Redlich-Peterson model was only fitted to the red dye adsorption data. The magnitude of the Dubinin-Radushkevich energetic parameters (E, from 7.00 to 15.00 kJ mol-1) indicates that the adsorption of the dyes onto Sil-NH2, in the absence and in the presence of DBS, is controlled by water adsorbed/dye in solution ion-exchange interactions. It is observed that the values of DeltaadsH are positive for both dyes and the values are quite similar to each other. The exception is the adsorption of the yellow dye in the presence of DBS, which is slightly exothermic. The DeltaadsG values are all negative. However, the interactions of the dyes with Sil-NH2 silica are more spontaneous in the presence of the surfactant. The positive adsorption entropy values (DeltaadsS) for the interaction of the dyes suggest that entropy is a driving force of the dye adsorptions. However, the entropic contribution is higher for the adsorptions in the presence of DBS. It was suggested that the chemical structures of the dyes play an important role in the formation of the dye/DBS aggregates and in dye adsorption onto the aminopropyl silica.     

Solid-phase extraction of triazole fungicides from water samples using disks impregnated with carbon nanotubes followed by GC-MS analysis

Triazole fungicides are pesticides widely employed in the cultivation of fruits, vegetables and grains. However, their ability to change the steroid hormone biosynthesis may result in endocrine complications for mammals, as well as changes in cholesterol and triglyceride levels and hepatotoxicity. The analysis of the triazole fungicides in superficial waters is important in order to monitor the risk for the biota. However, the use of efficient extraction procedures has been necessary in order to concentrate these pesticides before the analysis. In-disk solid-phase extraction (SPE) can be highlighted as a potential pre-concentration technique, mainly because the possibility to extract the analytes from a large sample volume, increasing the method detectability. Carbon nanotubes (CNTs) have been often used as solid extraction phase due to their high sorption capacity, surface area and internal volume, as well as mechanical, chemical and thermal stability. In this paper, we proposed the preparation of a new SPE disk impregnated with CNTs for the extraction of triazole fungicides from environmental water samples. The disks were obtained by acid corrosion of a cellulose membrane followed by its impregnation with CNTs. The developed method was validated for the analysis of triadimenol, tebuconazole and epoxiconazole, according to international validation protocols. The limits of quantification obtained for triadimenol, tebuconazole and epoxiconazole were 0.1, 0.1 and 0.05 µg L^?1, respectively. The linearity ranged from 0.05 to 10.00 µg L^?1 for epoxiconazole and from 0.1 to 10.00 µg L^?1 for triadimenol and tebuconazole, with correlation coefficients higher than 0.999 for all of them. The precisions, expressed as relative standard deviation, were lower than 12%. The accuracies were within ?12.07% to 17.7% (expressed as relative error).     

Modified electrode with reduced graphene oxide/poly(3-hydroxyphenylacetic acid): a new platform for oligonucleotide hybridization

Journal of Solid State Electrochemistry - This paper reports a new platform for oligonucleotide hybridization, prepared by electropolymerization of 3-hydroxyphenylacetic acid onto gold electrode...     

Thermography Applied to the Study of Fatigue Crack Propagation in Polycarbonate

Thermography was used to study the propagation of fatigue cracks during cyclic loading of pre-cracked SAE keyhole polycarbonate specimens. A micro-bolometer infrared camera (FLIR A655sc) and a commercially available software program (DeltaTherm2) were employed. The stress intensity factors were determined using a hybrid thermoelastic stress analysis (TSA) technique. The crack growth rate was determined via thermography using two different approaches. The first approach used the output of the crack-tip position from the developed TSA algorithm and the number of cycles between data sets. The second approach used temperature measurement as a new way to determine da/dN (crack growth rate) directly. As a result, da/dN vs ΔK (stress intensity factor range) graphs were plotted and fitted using Paris’ law. A comparison between the resultant da/dN vs ΔK curves and results found in the literature, as well as curves from the finite element method (FEM) simulations showed good agreement. The conclusion was that thermography is a very powerful tool that can detect, measure and monitor fatigue cracks in polycarbonate.     

Superparamagnetic relaxation Mössbauer spectra by phonon–magnon interaction using the multilevel method

The formation of local moments and the effect of charge carrriers in dilute magnetic semiconductors can be well understood using local probe techniques like Mossbauer Spectroscopy. We report here on Mossbauer studies in the systems Fe_0.008Ge_{1 ? x} D _x (D = As, Bi), Fe_0.008Ge_{1 ? x} In _x , and Fe_0.008Ge_{1 ? x} Sn _x . At room temperature magnetic interactions were observed for donor (D) impurities at the Fe site in the Fe_0.008Ge system. No such magnetic ordering was observed for acceptor (In) or neutral (Sn) impurities.     

Mass measurement of neutron-rich isotopes from51Ca to72Ni

The ground state masses of thirty-nine neutronrich nuclei from⁵¹Ca to⁷²Ni have been measured using the Time-of-Flight Isochronous (TOFI) spectrometer. Eight of these masses have been measured for the first time and thirty-one are remeasurements of neutron-rich nuclei previously reported. Good agreement between these results and a previous TOFI experiment was observed except for the most neutron-rich isotopes of vanadium through iron with the present results being more bound and in better agreement with theory. The low binding energy of⁶⁸Ni, as indicated by an unreasonably low two-neutron separation energy, suggests the presence of a high-lying, long-lived isomeric state in this nucleus.     

Stress and Strain Analysis of Pipelines with Localized Metal Loss

This paper presents the analysis of stress and strain data acquired with the finite element method and with tests that used post-yielding strain gages bonded onto the external surface of pipes that suffered thickness metal loss and that had been loaded with internal pressure. These metal loss areas were produced by three different processes: actual internal corrosion, careful machining of external patches by spark-erosion, and milling of internal or external patches to simulate limited or extensive strip corrosion defects with depths up to 70% of the pipe’s thickness. Results show that: (1) the extensive longitudinal internal or external defect areas behave as extensive strips with a high degree of freedom to deform elastically and plastically in the circumferential and thickness directions, and (2) large restraints are offered to the longitudinal strains by the non-corroded thick walls parallel to the strip. Using the above experimental observation, a simple mathematical model was developed to predict the burst pressure of pipes with longitudinal extensive and reasonably constant depths of metal loss. This model employed thin-pipe-strength-of-material equations associated to a bulging correction factor, the material’s uniaxial ultimate strength and the von Mises criterion. The onset of plastic collapse predicted by the simple model was successfully compared with results determined from actual hydrostatic tests that were carried out with full scale pipe specimens and from finite element results generated by the use of a commercial program. The developed model was also helpful in showing that the yield and burst behaviors of new or corroded pipeline specimens under laboratory test conditions can be directly compared and extended to the yield and burst behaviors of buried pipeline in field operation.     

New approach for natural products screening by real-time monitoring of hemoglobin hydrolysis using quartz crystal microbalance

The hemoglobin (Hb) released from erythrocytes is a primary nutritive component for many blood-feeding parasites. The aspartic protease cathepsin D is a hemoglobinase that is involved in the Hb degradation process and is considered an interesting target for chemotherapy intervention. However, traditional enzymatic assays for studying Hb degradation utilize spectrophotometric techniques, which do not allow real-time monitoring and can present serious interference problems. Herein, we describe a biosensor using simple approach for the real-time monitoring of Hb hydrolysis as well as an efficient screening method for natural products as enzymatic inhibitors using a quartz crystal microbalance (QCM) technique. Hemoglobin was anchored on the quartz crystal surface using mixed self-assembled monolayers. The addition of the enzyme caused a mass change (frequency shift) due to Hb hydrolysis, which was monitored in real time. From the frequency change patterns of the Hb-functionalized QCM, we evaluated the enzymatic reaction by determining the kinetic parameters of product formation (k_cat). The QCM enzymatic assay using immobilized human Hb was shown to be an excellent approach for screening possible inhibitors in complex mixtures, opening up a new avenue for the discovery of novel inhibitors.     

Optimal design of experiments applied to headspace solid phase microextraction for the quantification of vicinal diketones in beer through gas chromatography-mass spectrometric detection

Vicinal diketones, namely diacetyl (DC) and pentanedione (PN), are compounds naturally found in beer that play a key role in the definition of its aroma. In lager beer, they are responsible for off-flavors (buttery flavor) and therefore their presence and quantification is of paramount importance to beer producers. Aiming at developing an accurate quantitative monitoring scheme to follow these off-flavor compounds during beer production and in the final product, the head space solid-phase microextraction (HS-SPME) analytical procedure was tuned through experiments planned in an optimal way and the final settings were fully validated. Optimal design of experiments (O-DOE) is a computational, statistically-oriented approach for designing experiences that are most informative according to a well-defined criterion. This methodology was applied for HS-SPME optimization, leading to the following optimal extraction conditions for the quantification of VDK: use a CAR/PDMS fiber, 5 ml of samples in 20 ml vial, 5 min of pre-incubation time followed by 25 min of extraction at 30 °C, with agitation. The validation of the final analytical methodology was performed using a matrix-matched calibration, in order to minimize matrix effects. The following key features were obtained: linearity (R² > 0.999, both for diacetyl and 2,3-pentanedione), high sensitivity (LOD of 0.92 μg L⁻¹ and 2.80 μg L⁻¹, and LOQ of 3.30 μg L⁻¹ and 10.01 μg L⁻¹, for diacetyl and 2,3-pentanedione, respectively), recoveries of approximately 100% and suitable precision (repeatability and reproducibility lower than 3% and 7.5%, respectively). The applicability of the methodology was fully confirmed through an independent analysis of several beer samples, with analyte concentrations ranging from 4 to 200 g L⁻¹.