Cadmium and zinc determination by neutron activation analysis and biochemical tests in tissues of workers professionally exposed to cadmium

Cadmium and zinc levels in urine, serum, hair obtained from workers professionally exposed to cadmium oxide dust and from a control, nonoccupationally exposed group were determined by neutron activation analysis. The study was completed by biochemical monitoring tests such as the ₂ (₂-MG) determination in urine and serum and the -aminolevulinic acid dehydratase (ALAD) determination in blood. Significantly increased levels of cadmium in urine, serum, and hair, ₂-MG in urine and serum, ALAD in blood and decreased levels of zinc in serum were found in the exposed group compared to the control group. The most distinct differences of the parameters studied were observed for cadmium in hair. Correlations among the parameters were preliminary evaluated, too. For quality assurance purposes, the cadmium and zinc concentrations were determined in biological (standard) reference materials NBS SRM-1577 Bovine Liver, Bowen's Kale, IAEA A-11 Milk Powder, and IAEA H-8 Horse Kidney.     

On distribution of molecular weight in anionic polymerizates of caprolactam

Measurement has been made of the dependence of the molecular weight distribution on the ratio of the catalytic system components and on the polymerization time for polycaprolactam obtained by anionic polymerization. A bimodal character of the curves was observed for products made using molar ratios of activator (N-benzoylcaprolactam) to initiator (sodium dihydro-bis(methoxyethoxy)aluminate) of 1:1 and 1:3, when the polymerization times were less than 1 hr. This course is explained by the influence of fast side-reactions, mainly condensations. For a ratio of 3:1 of the components of the catalytic system, smooth integral distribution curves are obtained, accounting for a very fast decrease in the strong base concentration in the initial stages of the polymerization.     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Stereochemistry of cyclic ether formation—II : Intramolecular cyclisation of secondary aliphatic alcohols to tetrahydrofuran-type ethers

The mechanism and stereochemistry of δ-C atom functionalisation in the reactions of secondary straight-chain aliphatic alcohols with lead tetraacetate, ceric ammonium nitrate, and heavy metal (Pb⁴⁺, Hg²⁺, Ag⁺) salts (AcO)^?1, O^2?, CO₃^2?-halogen (I₂, Br₂, Cl₂) combinations are discussed. By demonstrating the intermediacy of 5-bromo-2-hexanol, it was confirmed that the dark silver oxidebromine induced cyclisation of 2-hexanol (and alcohols in general) involves (as the other hypohalite reactions) intramolecular 1,5-hydrogen abstraction by alkoxy radicals and formation of δ-bromohydrins. A novel and simple procedure for obtaining tetrahydrofurans from alcohols by way of the hypochlorite reaction, using silver or mercuric salts and chlorine, is described.     

Spectral and electrochemical study of coordination molecules Cu4OX6L4: 3-Methylpyridine and 4-Methylpyridine Cu4OBrnCl(6−n)L4 complexes

The tetranuclear Cu₄OBr_nCl_(6-n)L₄ complexes, where L = 3-methylpyridine (3-Mepy), 4-methylpyridine (4-Mepy) and n=0–6 with trigonal bipyramidal coordination of copper(II) were prepared and their infrared and electronic absorption spectra as well as cyclic voltammograms in nitromethane solutions were measured. The polyhedra in Cu₄OBr_nCl_(6−n) (3-Mepy)₄ molecules are less distorted comparing with those of 4-Mepy analogues as indicated by infrared Cu₄O absorptions, far infrared Cu—Br, Cu—Cl, and Cu—N absorptions, d—d bands in electronic spectra and potentials, measured by cyclic voltammetry. The 3-Mepy complexes exhibit strong single infrared Cu₄O absorptions, while for related 4-Mepy complexes doubly split Cu₄O bands were observed. Two strongly overlapped d—d bands in electronic absorption spectra of the 3-and 4-Mepy complexes in nitromethane were resolved by Gaussian fitting. The 4-Mepy ligand produces slightly stronger ligand field than its 3-Mepy analogue. The maxima of high-energy d—d bands are in a linear correlation with the number of bromide ligands. The correlations for corresponding low-energy bands are considerably deviated from linearity. The halfwave potentials of the complexes in nitromethane correlate with both the number of bromides and the data of electronic absorption spectra suggesting that the reducing electron at the electrode process enters the half-filled d _{z 2} orbital of the copper(II) atom. The origin of a difference between the 3-and 4-Mepy complexes in their spectral and electrochemical properties is also discussed.     

Interactions of proteins with uniform colloidal hematite and chromium hydroxide particles. I. Adsorption

The adsorption of ovalbumin, -globulin, and lysozyme on uniform spherical hematite and chromium hydroxide particles in aqueous media has been studied as a function of the pH at a constant ionic strength. The uptake of ovalbumin and -globulin was greatest at their isoelectric points and differed little at 10^–2 and 10^–3 mol dm^–3 NaNO₃. The adsorption of lysozyme was strongly influenced by the ionic strength.The deposition of ovalbumin on hematite in the presence of Mg (NO₃)₂ was significantly greater than that with NaNO₃ under otherwise comparable conditions. Dialysis experiments with ovalbumin against magnesium nitrate solutions showed Mg²⁺ to be specifically bound to the protein.The shapes of isotherms indicated monolayer coverage for ovalbumin and multilayer coating for lysozyme for both adsorbents. The shapes of isotherms of -globulin on hematite point to a rearrangement of the protein on the particle surface, while a monolayer was found on chromium hydroxide particles.Supported by the NSF Grant CHE-9108420Part of a Ph.D. thesis     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Improvement of electron capture efficiency by resonant excitation

A novel pulse sequence improving the efficiency for electron capture dissociation (ECD) of an unmodified Fourier transform ion cyclotron resonance (FTICR) mass spectrometer by more than an order of magnitude is presented. Commercially available FTICR instruments are usually equipped with a filament-based electron source producing an electron beam that has a rather small cross section. An ideal overlap between the rotating ion cloud and the electron beam appears to be a prerequisite for a high ECD efficiency. A reduced interception of the ion cloud and the electron beam is probably due to the contribution of the magnetron motion to the trajectory of the ions, resulting in a precession about the z-axis of the instrument. By increasing the kinetic energy and therefore increasing the cyclotron radii of the precursor ions by resonant excitation, the overlap of the rotating ion cloud with the electron beam is improved. By use of this protocol the efficiency of electron capture is substantially increased and consequently the acquisition time of ECD spectra is reduced significantly. The capability of resonant excitation of the precursor ions during the irradiation with electrons is demonstrated for standard peptides. This approach is particularly valuable for analysis and characterization of O-glycosylated peptides. In addition to amino acid sequence information, the attachment site of the labile glycan moiety is determined, and also radical-site-induced fragmentations of the glycosidic bonds are observed.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005