Synthesis and Characterization of Partially Substituted at Lower Rim Phosphorus Containing Calix(4)arenes

The synthesis and characterization of several new phosphorus-containing partially lower rim substituted derivatives of 5,11,17,23-tetra(t-butyl) calix(4)arene (I) and 5,11,17,23-tetra(t-octyl)calix(4)arene (II), namely 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(diphenylphosphinoyl-oxy) calix(4)arene (IV); 5,11,17,23-tetra(t-butyl)-25-hydroxy-26,27,28-tris(tetramethyldiamido-phosphinoyl-oxy) calix(4)arene (Vb); 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene (VI); 5,11,17,23-tetra (t-octyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene (VII) are reported. The structure of the synthesized calix(4)arene derivatives are identified and confirmed by elemental analysis, IR, ¹H, ¹³C, ³¹P{¹H} NMR spectroscopy and mass spectrometry as and X-ray crystallographic analysis of 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene VI. According to the NMR spectra, all calix(4)arenes are in cone conformation.     

Surface Properties of Anatase TiO2 Nanowire Films Grown from a Fluoride‐Containing Solution

Controlling the surface chemistry of nucleating seeds during wet‐chemical synthesis allows for the preparation of morphologically well‐defined nanostructures. Synthesis conditions play a key role in the surface properties, which directly affect the functional properties of the material. Therefore, it is important to establish post‐synthesis treatments to facilitate the optimization of surface properties with respect to a specific application, without losing the morphological peculiarity of the nanostructure. We studied the surface properties of highly crystalline and porous anatase TiO₂ nanowire (NW) electrodes, grown by chemical‐bath deposition in fluoride‐containing solutions, using a combined electrochemical and spectroscopic approach. As‐deposited films showed low capacity for catechol adsorption and a poor photoelectrocatalytic activity for water oxidation. Mild thermal annealing at 200 °C resulted in a significant improvement of the electrode photoelectrocatalytic activity, whereas the bulk properties of the NWs (crystal structure, band‐gap energy) remained unchanged. Enhancement of the functional properties of the material is discussed on the basis of adsorption capacity and electronic properties. The temperature‐induced decrease of recombination centers, along with the concomitant increase of adsorption and reaction sites upon thermal annealing are called to be responsible for such improved performance.     

Multiresidue LC–MS/MS analysis of cephalosporins and quinolones in milk following ultrasound‐assisted matrix solid‐phase dispersive extraction combined with the quick,easy, cheap,effective, rugged,and safe methodology

A sensitive and selective confirmatory method for milk‐residue analysis of ten quinolones and eight cephalosporins by LC‐MS/MS has been developed herein. For the chromatographic separation of target analytes, a Perfectsil ODS‐2 (250 × 4 mm, 5 μm) analytical column was used and gradient elution was applied, using a mobile phase of 0.1% w/w TFA in water and 0.1% w/w TFA in ACN. Ultrasound‐assisted matrix solid‐phase dispersion procedure was applied for the extraction and clean‐up procedure of antimicrobials agents from milk matrix using a mixture of Bond Elut Plexa sorbent and QuEChERS. The method was validated meeting the European Legislation determining selectivity, linearity response, trueness, precision (repeatability and between‐day reproducibility), decision limit, detection capability, and ruggedness following the Youden approach. Recoveries of all antibiotics ranged from 81.7 to 117.9%, while RSD values were lower than 13.7%. Limits of quantification for all examined compounds ranged from 2.4 to 15.0 μg/kg, substantially lower than the maximum residue limits established by the European Union (30–100 μg/kg).     

Sultam Thioureas Synthesized via an Alternative Ring-Forming Reaction

A method for the synthesis of sultam thioureas via a different 1,4,2-dithiazolidine 1,1-dioxide ring-forming reaction is presented here. The syntheses of nine sultam thioureas were achieved in 53–81% yield by reacting N-substituted chloromethanesulfonamides with thiocarbamoyl isothiocyanates, which were formed in situ from the reaction of 5-(disubstituted amino)-3H-1,2,4-dithiazole-3-thiones with triphenylphosphine. Importantly, this method successfully allowed the substituent of the ring nitrogen atom to be varied. Additionally, the structures of four sultam thioureas were confirmed by x-ray diffraction.     

Determination of five booster biocides in seawater by stir bar sorptive extraction–thermal desorption–gas chromatography–mass spectrometry

Stir bar sorptive extraction (SBSE) and thermal desorption (TD)–gas chromatography–mass spectrometry (GC–MS) have been optimized for the determination of five organic booster biocides (Chlorothalonil, Dichlofluanid, Sea-Nine 211, Irgarol 1051 and TCMTB) in seawater samples. The parameters affecting the desorption and absorption steps were investigated using 10 mL seawater samples. The optimised conditions consisted of an addition of 0.2 g mL⁻¹ KCl to the sample, which was extracted with 10 mm length, 0.5 mm film thickness stir bars coated with polydimethylsiloxane (PDMS), and stirred at 900 rpm for 90 min at room temperature (25 °C) in a vial. Desorption was carried out at 280 °C for 5 min under 50 mL min⁻¹ of helium flow in the splitless mode while maintaining a cryotrapping temperature of 20 °C in the programmed-temperature vaporization (PTV) injector of the GC–MS system. Finally, the PTV injector was ramped to a temperature of 280 °C and the analytes were separated in the GC and detected by MS using the selected-ion monitoring (SIM) mode. The detection limits of booster biocides were found to be in the range of 0.005–0.9 μg L⁻¹. The regression coefficients were higher than 0.999 for all analytes. The average recovery was higher than 72% (R.S.D.: 7–15%). All these figures of merit were established running samples in triplicate. This simple, accurate, sensitive and selective analytical method may be used for the determination of trace amounts of booster biocides in water samples from marinas.     

Preparation of Primary Thioamides From Nitriles Using Sodium Hydrogen Sulfide and Diethylamine Hydrochloride

Primary thioamides are prepared in moderate to excellent yields by treating nitriles with sodium hydrogen sulfide and diethylamine hydrochloride in an appropriate solvent with mild heating.     

Identification of bioactive peptides in hypoallergenic infant milk formulas by CE‐TOF‐MS assisted by semiempirical model of electromigration behavior

Biologically active peptides derived from complex bovine milk protein hydrolysates are of particular interest in food science and nutrition because they have been shown to play different physiological roles, providing benefits in human health. In this study, we used CE‐TOF‐MS for separation and identification of bioactive peptides in three hypoallergenic infant milk formulas. An appropriate sample cleanup using a citrate buffer with DTT and urea followed by SPE with Sep‐Pack® C18 and StrataX^TM cartridges allowed the detection of a large number of low molecular mass bioactive peptides. This preliminary identification was solely based on the measured experimental monoisotopic molecular mass values (M_exp). Later, we evaluated the classical semiempirical relationships between electrophoretic mobility and charge‐to‐mass ratio (m_e vs. q/M^α, α = 1/2 for the classical polymer model) to describe their migration behavior. The assistance of migration prediction proved to be useful to improve reliability of the identification, avoiding misinterpretations and solving some identity conflicts. After revision, the identity of 24, 30, and 38 bioactive peptides was confirmed in each of the three infant milk formulas. A significant number of these peptides were reported as inhibitors of angiotensin‐converting enzyme, however, the presence of sequences with other biological activities such as antihypertensive, antithrombotic, hypocholesterolemic, immunomodulation, cytotoxicity, antioxidant, antimicrobial, antigenic, or opioid was also confirmed.     

DOT2: Macromolecular docking with improved biophysical models

Computational docking is a useful tool for predicting macromolecular complexes, which are often difficult to determine experimentally. Here, we present the DOT2 software suite, an updated version of the DOT intermolecular docking program. DOT2 provides straightforward, automated construction of improved biophysical models based on molecular coordinates, offering checkpoints that guide the user to include critical features. DOT has been updated to run more quickly, allow flexibility in grid size and spacing, and generate an infinitive complete list of favorable candidate configurations. Output can be filtered by experimental data and rescored by the sum of electrostatic and atomic desolvation energies. We show that this rescoring method improves the ranking of correct complexes for a wide range of macromolecular interactions and demonstrate that biologically relevant models are essential for biologically relevant results. The flexibility and versatility of DOT2 accommodate realistic models of complex biological systems, improving the likelihood of a successful docking outcome. © 2013 Wiley Periodicals, Inc.     

Supramolecular main-chain liquid crystalline polymers and networks with competitive hydrogen bonding

A series of supramolecular polymers and networks with variable liquid crystalline characteristics have been created. These species are formed though the benzoic acid/pyridine associations of a flexible bisacid and a mixture of a rigid bispyridyl and a non-mesogenic tetrapyridyl. The networked systems displayed liquid crystalline characteristics up to and including 22.5% netpoint inclusion. Above this concentration, only crystalline and melting behaviours were observed. This observed phenomenon would seem to be linked to the statistical correlation of hydrogen bond acceptors and donors. There was also no observed phase segregation of the species after multiple heat/cool cycles and extended periods of time in the isotropic state. This would indicate that the thermodynamically more stable mesogenic phase cannot out-compete the non-liquid crystalline network. Computational analysis indicates no significant difference in hydrogen bond strength between the two different hydrogen bond acceptors.     

Structural Diversity from the Transannular Cyclizations of Natural Germacrone and Epoxy Derivatives: A Theoretical–Experimental Study

Treatment of germacrone ( 1 ) with different electrophiles, and of its epoxy derivatives germacrone‐4,5‐epoxide ( 2 ), germacrone‐1,10‐epoxide ( 3 ) and isogermacrone‐4,5‐epoxide ( 4 ) with Brönsted/Lewis acids and Ti^III, gives rise to a great structural diversity. Thus, by using a maximum of two steps, the production of more than 40 compounds corresponding to 14 skeletons is described. Computational calculations rationalizing the structural divergence produced are also described. Finally, since some of the compounds generated are bioactive natural sesquiterpenes, the mechanisms of formation of these substances will provide new insights in their biosynthesis.