Matrix molecularly imprinted mesoporous sol–gel sorbent for efficient solid-phase extraction of chloramphenicol from milk

Highly selective and efficient chloramphenicol imprinted sol–gel silica based inorganic polymeric sorbent (sol–gel MIP) was synthesized via matrix imprinting approach for the extraction of chloramphenicol in milk. Chloramphenicol was used as the template molecule, 3-aminopropyltriethoxysilane (3-APTES) and triethoxyphenylsilane (TEPS) as the functional precursors, tetramethyl orthosilicate (TMOS) as the cross-linker, isopropanol as the solvent/porogen, and HCl as the sol–gel catalyst. Non-imprinted sol–gel polymer (sol–gel NIP) was synthesized under identical conditions in absence of template molecules for comparison purpose. Both synthesized materials were characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR) and nitrogen adsorption porosimetry, which unambiguously confirmed their significant structural and morphological differences.     

Rapid detection of bacterial endotoxins in ophthalmic viscosurgical device materials by direct analysis in real time mass spectrometry

Bacterial endotoxins are lipopolysaccharides bound to the bacterial cell wall and released when bacteria rupture or disintegrate. Possible contamination of endotoxin in ophthalmic devices can cause a painful eye inflammation or result in toxic anterior segment syndrome after cataract surgery. Measurement of bacterial endotoxin in medical device materials is difficult since endotoxin binds with polymer matrix and some of the materials are very viscous and non-water soluble, where traditional enzyme-based Limulus amebocyte lysate (LAL) assay cannot be applied. Here we propose a rapid and high throughput ambient ionization mass spectrometric (MS) method using direct analysis in real time (DART) for the evaluation of endotoxin contamination in medical device materials. Large and structurally complex endotoxin instantaneously breaks down into low-mass characteristic fragment ions using DART and is detected by MS in both positive and negative ion modes. This method enables the identification and separation of endotoxin from medical materials with a detection limit of 0.03 ng mL⁻¹ endotoxins in aqueous solution. Ophthalmic viscosurgical device materials including sodium hyaluronate (NaHA), non-water soluble perfluoro-n-octane (PFO) and silicone oil (SO) were spiked with different known concentrations of endotoxin and analyzed by DART MS, where the presence of endotoxin was successfully detected and featured small mass fragment ions were generated for NaHA, PFO and SO as well. Current findings showed the feasibility of measuring endotoxin contamination in medical device materials using DART-MS, which can lead to a one-step analysis of endotoxins in different matrices, avoiding any potential contamination during sample pre-treatment steps.     

Bis- and tris(2-seleno-1-methylimidazolyl)hydroborato complexes, {[BseMe]ZnX}2(X=Cl, I), [BseMe]2Zn and [TseMe]Re(CO)3: structural evidence that the [BseMe] ligand is not merely a "heavier" version of the sulfur counterpart, [BmMe

New bidentate and tridentate ligands that feature selenium donors, namely the bis- and tris(2-seleno-1-methylimidazolyl)hydroborato ligands [BseMe] and [TseMe], have been constructed via the reaction of MBH4(M=Na, K) with 1-methylimidazole-2-selone. Comparison of the structure of {[BseMe]ZnI}2 with its sulfur counterpart, [BmMe]ZnI, demonstrates that the seleno ligand exhibits a greater tendency than the mercapto ligand to bridge two metal centers, while comparison of [TseMe]Re(CO)3 and [TseMes]Re(CO)3 indicates that the [TseMe] ligand is more electron donating and less sterically demanding than the [TseMes] ligand.     

HPLC determination of cefotaxime and cephalexine residues in milk and cephalexine in veterinary formulation

An HPLC method was developed and validated for the determination of the cephalosporins cefotaxime and cephalexine in skimmed bovine milk. The analytical column, Kromasil C₁₈ (250 mm × 4.0 mm, 5 μm) was operated at ambient temperature. Mobile phase consisted of CH₃OH-acetate buffer (pH = 4.0) and it was delivered isocratically at a flow rate of 1.0 mL · min⁻¹. Total analysis time was less than 5 min. Caffeine was used as internal standard (5 ng · μL⁻¹). UV detection was performed at 265 nm. Method validation was performed by means of intra-day (n = 5) and inter-day accuracy and precision (n = 8), sensitivity and linearity. Limits of detection (LOD) and limits of quantification (LOQ) were 0.1 and 0.3 ng · μL⁻¹, respectively. The method was applied to the analysis of a veterinary drug (CEPOREX) containing cephalexine. The results were quite accurate with the relative error varying from −8.0 to −3.5%. Solid-phase extraction was applied to remove all matrix interference from milk samples. High extraction recoveries (average 84–121%) were achieved by using Abselut NEXUS cartridges with acetonitrile as eluent and a rinsing step with water and n-butanol. A pre-concentration step was necessary in a 1/10 level to reach the EU MRL concentration level (100 μg · kg⁻¹). RSD values were less than 7% for both cephalosporins. Correspondence: Ioannis N. Papadoyannis, Laboratory of Analytical Chemistry, Department of Chemistry, Aristotle University of Thessaloniki, GR-54124 Thessaloniki, Greece     

Structural studies of cyclic ureas: 1. Enthalpies of formation of imidazolidin-2-one and N,N′-trimethyleneurea

A thermophysical and thermochemical study has been carried out for crystalline imidazolidin-2-one and N,N′-trimethyleneurea [tetrahydropyrimidin-2(1H)-one]. The thermophysical study was made by differential scanning calorimetry, d.s.c., in the temperature intervals between T = 268 K and their respective melting temperatures. Several solid–solid transitions have been detected in imidazolidin-2-one. The standard (p^° = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, for crystalline imidazolidin-2-one and N,N′-trimethyleneurea [tetrahydropyrimidin-2(1H)-one], were determined using static-bomb combustion calorimetry. The standard molar enthalpies of sublimation, at T = 298.15 K, for the two compounds were derived from the variation of their vapour pressures, measured by the Knudsen effusion method, with the temperature. These two thermochemical parameters yielded the standard molar enthalpies of formation of the two cyclic urea compounds studied in the gaseous phase at T = 298.15 K. These values are discussed in terms of molecular structural contributions and interpreted on the bases of the “benzo-condensed effect” and of the ring strain of imidazolidin-2-one.     

Theoretical evaluation of methods for extracting retention factors and kinetic rate constants in liquid chromatography

A three-dimensional stochastic simulation is used to provide a detailed understanding of mass transfer processes in liquid chromatography. In this simulation, the migration of individual molecules is established through diffusion and laminar convection within the mobile phase. The molecules interact with the stationary phase by a partition (absorption) mechanism. For these studies, the column length, linear velocity, stationary-phase diffusion coefficient, interfacial mass transfer coefficient, and equilibrium constant are varied in a system with a homogeneous surface. Heterogeneous surfaces are also investigated by having multiple types of interaction sites that are equally or unequally distributed. For each simulation, the molecular distribution is examined and characterized at specified times or column lengths. Five individual methods are then applied to extract the thermodynamic and kinetic information for transport between the mobile and stationary phases. In the first method, all of the molecules are initially distributed in the mobile phase and the fraction remaining is monitored as a function of time. These simulation data are fit to a single exponential decay by nonlinear regression to determine the "true" retention factors and rate constants. The other methods rely on evaluating the shape of the zone profiles along the column. The statistical moments of the profiles are used to calculate the mean and the variance, which are related to the retention factors and the rate constants, respectively. The profiles are also fit to the exponentially modified Gaussian equation, the Giddings equation, and the Thomas equation. The fitting parameters from these equations are then used to calculate the retention factors and rate constants. Comparisons of the accuracy relative to the "true" retention factors and "true" rate constants, as well as the advantages and limitations of each method are discussed.     

The effect of 2'-fluorine substitutions on DNA i-motif conformation and stability

(1)H and (19)F NMR, and UV thermal melting studies have established that the stability of d(TCCCCC) is enhanced by the inclusion of a single 2'-fluorine-modified deoxycytidine residue; the results support the notion of the importance of sugar-sugar contacts in stabilising i-motifs in general and reveal that solvation is the cause of the instability of RNA equivalents.     

Development of an HPLC multi-residue method for the determination of ten quinolones in bovine liver and porcine kidney according to the European Union Decision 2002/657/EC

A sensitive multi-residue analytical method was developed for the determination of ten quinolones: enoxacin, ofloxacin, norfloxacin, ciprofloxacin, danofloxacin, enrofloxacin, sarafloxacin, oxolinic acid, nalidixic acid, and flumequine in bovine liver and porcine kidney. A simple liquid extraction step followed by a solid phase extraction clean up procedure was applied for the extraction of quinolones from liver and kidney tissues. Recoveries of the extraction varied between 82 and 88% for bovine liver and 92 and 95% for porcine kidney. Separation was performed on an ODS-3 PerfectSil Target (250 x 4 mm) 5 microm analytical column at 25 degrees C. The mobile phase consisted of a mixture of TFA 0.1%-CH(3)CN-CH(3)OH, delivered at a flow rate of 1.2 mL/min according to a gradient program. Elution of quinolones and the internal standard (caffeine, 7.5 ng/microL) was complete within 27 min. Photodiode array detection was used for monitoring the eluants at 275 and 255 nm. The method was fully validated according to the European Union Decision 2002/657/EC, determining linearity, selectivity, decision limit, detection capability, accuracy, and precision. The LODs of the specific method of quinolone determination in bovine liver varied between 3 and 7 microg/kg and in porcine kidney between 3 and 4 microg/kg.     

Development of a validated HPLC method for the determination of four 1,4-benzodiazepines in human biological fluids

A simple and sensitive HPLC method was developed and validated for the determination of four frequently prescribed 1,4-benzodiazepines: alprazolam (ALP), bromazepam (BRZ), diazepam (DZP), and flunitrazepam (FNZ). Separation was achieved on an Inertsil C8 analytical (250 mm x 4 mm, 5 microm) column, after selective extraction of benzodiazepine drugs from biological matrices by means of SPE. Isocratic elution was performed with a mobile phase consisting of CH3COONH4, 0.05 M CH3OH, and CH3CN (33:57:10 by volume). Quantification was performed at 240 nm with mefenamic acid (6 ng/microL) as the internal standard. DSC-18 Supelco cartridges provided high absolute recoveries (81-115%). The developed method was fully validated in terms of selectivity, linearity, accuracy, precision, stability, and sensitivity. Repeatability (n = 8) and between-day precision (n = 8) revealed RSD <12%. Recoveries from biological samples ranged from 81.2 to 115%. The detection limit of the method was calculated as 3.3-10.2 ng in blood plasma and 2.6-12.6 ng in urine for 20 microL injection volume. The method was applied to spiked biological matrices. Moreover, the method was applied to real samples of urine after an oral administration.