Bulk Free Radical Polymerization of Methyl Methacrylate and Vinyl Acetate: A Comparative Study

The model and methodology for estimating diffusion‐controlled rate coefficients for the methyl methacrylate (MMA) polymerization system is extended to the vinyl acetate (VAc) case. Comparison of the kinetic behavior and termination rate coefficients (k_t) of both monomers suggests that at low conversions the termination reaction is controlled by the chemical step, whereas at moderate and high conversions it is controlled by the diffusive step which in turn is determined by the segmental diffusion of the long radicals and not by the center of mass diffusion of short radicals. It is found that, for most of the conversion range, diffusion coefficient for VAc is lower than the one for MMA notwithstanding that k_tVAc > k_tMMA. An explanation of this apparent inconsistency on the base of the model results and in terms of segmental mobility is proposed.

     

Synthesis of diblock copolymers by combination of organocatalyzed ring‐opening polymerization and atom transfer radical polymerization using trichloroethanol as a bifunctional initiator

This study reports an application of trichloroethanol (TCE) as a bifunctional initiator for the synthesis of block copolymers (BCPs) by organocatalyzed ring‐opening polymerization (OROP) and atom transfer radical polymerization (ATRP). TCE was employed to synthesize a low dispersity poly (valerolactone) macroinitiator, which was subsequently used for the ATRP of tert‐butyl methacrylate. While it is known that TCE can serve as an initiator in ATRP, the ability to induce polymerization under OROP is reported for the first time. The formation of well‐defined BCPs was confirmed by gel permeation chromatography and ¹H NMR. Computational studies were performed to obtain a molecular‐level understanding of the ring‐opening polymerization mechanism involving TCE as initiator. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 563–569     

Inexpensive device for measurements with ion-selective and pH electrodes

The design and construction of a simple device for measuring ionic concentrations (or pH) with ion-selective electrodes are described. The automated system includes a special electronic circuit with an operational amplifier, a signal conditioner and a personalcomputer. A digital multimeter can be used if automation is not required. The results obtained in tests with iodide-, chloride- and nitrate-selective electrodes and glass electrodes show very good agreement with those obtained with sophisticated commercial apparatus.     

Analytical strategies to determine antibiotic residues in fish

The accelerated growth of aquaculture has resulted in a series of harmful effects to human health. The widespread and unrestricted use of antibiotics in this industry, to prevent bacterial infections, leads to remaining amounts in the aquatic environment. This has resulted in the emergence of antibiotic-resistant bacteria in aquaculture environments, in the increase in antibiotic resistance in fish pathogens as well as in the transfer of these resistance determinants to human pathogens. Moreover, the use of large amounts of antibiotics may lead to the presence of residual antibiotics in fish tissue and fish products. Fluoroquinolones, tetracyclines, penicillins, sulphonamides and other antibiotics, exhibiting activity against both Gram-positive and Gram-negative bacteria, are widely used for the treatment and prevention of diseases in fish. An extended and comprehensive review on the recent analytical methodologies concerning antibiotic residues in fish reported in the literature is provided in the present article. Emphasis is given on sample preparation regarding isolation and purification, chromatographic conditions and method validation according to legislation. Results of published assays are comparatively presented and criticised.     

Analysis of ochratoxin A in milk after direct immunoaffinity column clean-up by high-performance liquid chromatography with fluorescence detection

The present work describes a new analytical method for direct immunoaffinity column clean-up of ochratoxin A (OTA) in milk samples followed by determination of the toxin using high-performance liquid chromatography with fluorescence detection (HPLC-FD). Two different immunoaffinity cartridges (IAC) were investigated, and Ochraprep columns were chosen because they showed the best results. An average recovery of 89.8% and a mean RSD of 5.8% for artificially contaminated cow's milk in the range of 5-100 ng/L were attained. The calculated limit of detection (LOD) and limit of quantitation (LOQ) were as low as 0.5 and 5 ng/L, respectively. This new easy and fast method avoids a previous liquid-liquid extraction step and therefore the use of toxic chlorinated solvents. Chromatograms of the final extracts were clean and OTA could be easily detected at a retention time of 8.4 min without interferences. To assess the presence of the toxin in cow's milk eight samples of skimmed and four samples of whole milk were analysed and OTA was not detected over the established detection limit.     

Development and validation of an HPLC method for the determination of penicillin antibiotics residues in bovine muscle according to the European Union Decision 2002/657/EC

A high-performance liquid chromatographic method was developed for the determination of five penicillins: penicillin G (PENG), penicillin V (PENV), oxacillin (OX), cloxacillin (CLO), and dicloxacillin (DICLO), in bovine muscle. Samples were macerated with a mixture of H(2)O/CH(3)CN (1:1) and purified using RP-8 Adsorbex SPE cartridges after centrifugation, with mean recovery from spiked samples higher than 89%. The separation of the examined penicillins was achieved on an analytical column, an Inertsil C8 5 microm, 250x4 mm(2), at ambient temperature. The mobile phase consisted of 0.1% TFA/ACN 50:50 v/v delivered isocratically at a flow rate of 1.1 mL/min. Analytes were monitored at 240 nm. The procedure was validated according to the European Union Decision 2002/657/EC by means of selectivity, stability, decision limit, detection capability, accuracy, and precision. Method's LOQ values achieved were 54 microg/kg for PENG and DICLO, 46 microg/kg for PENV, 16 microg/kg for OX, and 43 microg/kg for DICLO. The detection capabilities (CC(beta)) were 73.6 microg/kg for PENG, 29.1 microg/kg for PENV, 350.6 microg/kg for OX, 379.9 microg/kg for CLO, and 355.8 microg/kg for DICLO. The method was applied to various samples from the local market. Two penicillins were identified by photodiode array (PDA) detection and quantified.     

The Potential Energies of Cohesion of a Crystalline Organic Enantiomer and the Racemate; on the Energy for the Liquid Racemate [1]

The cohesion potential energy of the crystal of one enantiomer of ethyl 3-cyano-3-(3,4-dimethyloxyphenyl)-2,2,4-trimethylpentanoate, −47.7 ± 0.1 kJ mol⁻¹ (0–90°C), was found out from the heat of sublimation (123.2 ± 5.1 kJ mol⁻¹, 78.6°C) and the kinetic energies for the gas phase and the crystal. It was found that the entropy function of Debye’s theory of solids mathematically agreed with the vibrational entropy of the gas (variationally obtained), allowing to disclose the vibrational energy using the Debye energy function (E _vib 835.0 kJ mol⁻¹ (78.6°C), E ⁰ included). E _kin for the crystal (771.1 kJ mol⁻¹ (78.6°C)) was obtained by Debye’s theory with the experimental heat capacity. The cohesion energy represented a moderate part of the sublimation energy. The cohesion energy of the racemic crystal, −44.2 kJ mol⁻¹, was obtained by the heat of formation of the crystal in the solid state (3.0 kJ mol⁻¹, 83.3°C) and E _kin for the crystal (by Debye’s theory). The decrease in cohesion on formation of the crystal accounted for the energy of formation. The change in potential energy on liquefaction of the racemate from the gas state was disclosed obtaining added-up E _{vib + rot} for the liquid in the way as to E _vib for the gas, the Debye entropy function being increasedly suited for the liquid (E _{vib + rot} 763.4 kJ mol⁻¹ (115.4°C)). Positive ΔE _pot, 13.0 kJ mol⁻¹, arised from the increase in electronic energy (Δ _l ν_mean − 154.3 cm⁻¹, by the dielectric nature of the liquid), added to the cohesion energy.     

Applications of microwave-assisted proteomics in biotechnology

Biotechnology has recently celebrated 30 years both as a science and as a multi-billion dollar industry. One application of biotechnology is to use human genetic information to discover, develop, manufacture, and commercialize biotherapeutics. Recombinant proteins can be produced in large quantities at high purity. High-throughput proteomic analysis is at the heart of the biotechnology research and development process, and the industry is constantly striving to streamline and automate the analytical processes involved. Microwave-assisted proteomics has recently emerged as a tool for increasing the bio-catalysis of several processes including tryptic digestions lipase selectivities, identification of metal-catalyzed oxidation sites on proteins, identification of protein N- and C-termini and enzyme catalyzed N-linked deglycosylation. Here, we explore the above mentioned methods, and describe our experiences evaluating microwave-technology for other common proteomic protocols including: removal of N-terminal pyroglutamyl for antibody characterization, beta elimination and Michael addition for identification of phosphorylation sites on recombinant proteins and enzyme mediated O-linked deglycosylation.     

Chiral pool based synthesis of pyrrolidinium ionic liquids

Chiral ionic liquids show promising applications in various different fields. A series of pyrrolidinium-based chiral ionic liquids bearing a chiral cation, a chiral anion or both was prepared in good yields using an efficient, economic and simple pathway. The chirality was introduced using (l)-lactate and (l)-menthol derivatives. The resultant chiral compounds were characterized by both spectroscopy and polarimetry. We envision that these new chiral compounds can serve as effective reaction media and chiral catalysts for asymmetric reactions, which are presently being investigated in our lab.     

A Bistable Microelectromechanical System Actuated by Spin-Crossover Molecules

We report on a bistable MEMS device actuated by spin-crossover molecules. The device consists of a freestanding silicon microcantilever with an integrated piezoresistive detection system, which was coated with a 140 nm thick film of the [Fe(HB(tz)₃)₂] (tz=1,2,4-triazol-1-yl) molecular spin-crossover complex. Switching from the low-spin to the high-spin state of the ferrous ions at 338 K led to a reversible upward bending of the cantilever in agreement with the change in the lattice parameters of the complex. The strong mechanical coupling was also evidenced by the decrease of approximately 66 Hz in the resonance frequency in the high-spin state as well as by the drop in the quality factor around the spin transition.