Quantitative Depth Profiling Using Online-Laser Ablation of Solid Samples in Liquid (LASIL) to Investigate the Oxidation Behavior of Transition Metal Borides

The increased demand for sustainability requires, among others, the development of new materials with enhanced corrosion resistance. Transition metal diborides are exceptional candidates, as they exhibit fascinating mechanical and thermal properties. However, at elevated temperatures and oxidizing atmospheres, their use is limited due to the fact of their inadequate oxidation resistance. Recently, it was found that chromium diboride doped with silicon can overcome this limitation. Further improvement of this protective coating requires detailed knowledge regarding the composition of the forming oxide layer and the change in the composition of the remaining thin film. In this work, an analytical method for the quantitative measurement of depth profiles without using matrix-matched reference materials was developed. Using this approach, based on the recently introduced online-LASIL technique, it was possible to achieve a depth resolution of 240 nm. A further decrease in the ablation rate is possible but demands a more sensitive detection of silicon. Two chromium diboride samples with different Si contents suffering an oxidation treatment were used to demonstrate the capabilities of this technique. The concentration profiles resembled the pathway of the formed oxidation layers as monitored with transmission electron microscopy. The stoichiometry of the oxidation layers differed strongly between the samples, suggesting different processes were taking place. The validity of the LASIL results was cross-checked with several other analytical techniques.     

Exploration of the Crystal Structure and Thermal and Spectroscopic Properties of Monoclinic Praseodymium Sulfate Pr2(SO4)3

Praseodymium sulfate was obtained by the precipitation method and the crystal structure was determined by Rietveld analysis. Pr₂(SO₄)₃ is crystallized in the monoclinic structure, space group C2/c, with cell parameters a = 21.6052 (4), b = 6.7237 (1) and c = 6.9777 (1) Å, β = 107.9148 (7)°, Z = 4, V = 964.48 (3) ų (T = 150 °C). The thermal expansion of Pr₂(SO₄)₃ is strongly anisotropic. As was obtained by XRD measurements, all cell parameters are increased on heating. However, due to a strong increase of the monoclinic angle β, there is a direction of negative thermal expansion. In the argon atmosphere, Pr₂(SO₄)₃ is stable in the temperature range of T = 30–870 °C. The kinetics of the thermal decomposition process of praseodymium sulfate octahydrate Pr₂(SO₄)₃·8H₂O was studied as well. The vibrational properties of Pr₂(SO₄)₃ were examined by Raman and Fourier-transform infrared absorption spectroscopy methods. The band gap structure of Pr₂(SO₄)₃ was evaluated by ab initio calculations, and it was found that the valence band top is dominated by the p electrons of oxygen ions, while the conduction band bottom is formed by the d electrons of Pr³⁺ ions. The exact position of ZPL is determined via PL and PLE spectra at 77 K to be at 481 nm, and that enabled a correct assignment of luminescent bands. The maximum luminescent band in Pr₂(SO₄)₃ belongs to the ³P₀ → ³F₂ transition at 640 nm.     

Physical Treatment Reduces Trypsin Inhibitor Activity and Modifies Chemical Composition of Marama Bean (Tylosema esculentum)

The utility of the marama bean (MB) as an alternative protein source to soybean (SB) can be limited by the high concentration of trypsin inhibitors (TI). The physical treatment of MB has the potential to ameliorate the antinutritional activities of TI and modify other chemical components. Thus, this study investigated the effects of physical treatments on the chemical components and trypsin inhibitor activity (TIA) of raw MB and SB. The bean substrates were subjected to each of the following treatment methods: (1) room temperature (20–22 °C) soaking for 24 h; (2) electric stove cooking at 100 °C for 10, 20, and 30 min; (3) steam autoclaving at a temperature of 110 °C and pressure of 7 pounds per square inch (psi), as well as a temperature of 121 °C and 7 psi for 5, 15, and 30 min; (4) pre-soaked autoclaving at 110 °C (7 psi) and 121 °C (17 psi) for 5, 15, and 30 min. Treated MB and SB had greater (p < 0.05) crude protein content than untreated samples. All the treatments (except 24 h soaking of MB) reduced (p < 0.05) the TIA and ash content. Marama and SB are similar in protein content, but their amino acids profile and TIA are quite different. Soaking for 24 h was less effective in reducing TIA in MB and SB, compared to the thermal methods, and it was detrimental to the ash and amino acids profile of the two beans. Soaking prior to autoclaving yielded beans with the lowest TI concentrations. In conclusion, thermal methods reduced the TI contents and modified the level of proximate components and amino acids profile of the beans.     

Use of spinning band distillation equipment for fractionation of volatile compounds of Copaifera oleoresins for developing a validated gas chromatographic method and evaluating antimicrobial activity

Copaifera is a tree that produces an oleoresin that has great historical and economic importance. These oleoresins display several pharmacological properties, such as anti‐inflammatory and antimicrobial, among others. The commercialization of Copaifera oleoresin occurs, in many cases, without any quality control, which facilitates its adulteration. Validated analytical methods can provide a safe quality control. In this work, the 800 Automatic Spinning Band Distillation equipment was used to perform the fractionation of the volatile oils obtained by hydrodistillation of Copaifera multijuga, C. paupera, C. Publifora and C. langsdorffii, aiming to isolate and purify the major compounds present in these oils. For purification, classical column chromatography was used, furnishing six isolated sesquiterpenes. The sesquiterpenes were used as standards in the development and validation of the method by GC–FID. The evaluated parameters were selectivity, linearity, precision, accuracy and robustness and they are all in accordance with ANVISA and International Conference on Harmonization guidelines. The developed method is reliable for the quantification of sesquiterpenes in Copaifera oleoresins. Both volatile oils and isolated sesquiterpenes had their minimum inhibitory concentration determined against strains of Gram‐negative and Gram‐positive bacteria and yeasts. Copaifera langsdorffi oleoresin was the only one active against all of the evaluated microorganisms, displaying good antimicrobial potential.     

Determination of CO2 capture during accelerated carbonation of engineered cementitious composite pastes by thermogravimetry

Journal of Thermal Analysis and Calorimetry - The present study has evaluated the rheological behavior of an oil-based (5W50) hybrid nanofluid [magnesium oxide (65%)–multi-walled carbon...     

Efficiency of Site-Specific Clicked Laccase–Carbon Nanotubes Biocathodes towards O2 Reduction

A maximization of a direct electron transfer (DET) between redox enzymes and electrodes can be obtained through the oriented immobilization of enzymes onto an electroactive surface. Here, a strategy for obtaining carbon nanotube (CNTs) based electrodes covalently modified with perfectly control-oriented fungal laccases is presented. Modelizations of the laccase-CNT interaction and of electron conduction pathways serve as a guide in choosing grafting positions. Homogeneous populations of alkyne-modified laccases are obtained through the reductive amination of a unique surface-accessible lysine residue selectively engineered near either one or the other of the two copper centers in enzyme variants. Immobilization of the site-specific alkynated enzymes is achieved by copper-catalyzed click reaction on azido-modified CNTs. A highly efficient reduction of O₂ at low overpotential and catalytic current densities over −3 mA cm⁻² are obtained by minimizing the distance from the electrode surface to the trinuclear cluster.     

Cover Feature: Oxidation of Benzyl Alcohol Using Cobalt Oxide Supported Inside and Outside Hollow Carbon Spheres (ChemistryOpen 6/2021)

The Cover Feature shows the cobalt oxide nanoparticles supported both inside and outside hollow carbon spheres (HCSs), which serve as a catalyst for benzyl alcohol oxidation. A metal oxidation step prior to the reaction enhanced the catalytic activity of benzyl alcohol which was used as a model reaction for the catalysts. Both catalysts showed similar activity and selectivity (to benzaldehyde) whether placed inside or outside the HCSs (70% selectivity at 50% conversion). No poisoning was observed due to product build up in the HCSs. More information can be found in the Full Paper by Pumza Mente et al.     

Optimization of the catalytic activity of manganese dioxide (MnO2) nanoparticles for degradation of environmental pollutants

Research on Chemical Intermediates - A routine release of slow-degrading agrochemicals in the environment has resulted in their gradual accumulation posing a major threat both to the terrestrial...