Synthesis and Transformations of 5‐Chloro‐2,2′‐Dipyrrins and Their Boron Complexes, 8‐Chloro‐BODIPYs

Symmetric dipyrrylketones 1 a , b were synthesized in two steps from the corresponding α‐free pyrroles, by reaction with thiophosgene followed by oxidative hydrolysis under basic conditions. The dipyrrylketones produced the corresponding 5‐chloro‐dipyrrinium salts or 5‐ethoxy‐dipyrrins on reaction with phosgene or Meerwein’s salt, respectively. Boron complexation of the dipyrrins afforded the corresponding 8‐functionalized BODIPYs (borondipyrromethenes) in high yields. The 5‐chloro‐dipyrrinium salts reacted with methoxide or ethoxide ions to produce monopyrrole esters, presumably via a 5,5‐dialkoxy‐dipyrromethane intermediate. In contrast, 8‐chloro‐BODIPYs underwent a variety of nucleophilic substitutions of the chloro group in the presence of alkoxide ions, Grignard reagents, and thiols. In the presence of excess alkoxide or Grignard reagent, at room temperature or above, substitution at the boron center also occurred. The 8‐chloro‐BODIPY was a particularly useful reagent for the preparation of 8‐aryl‐, 8‐alkyl‐, and 8‐vinyl‐substituted BODIPYs in very high yields, using Pd⁰‐catalyzed Stille cross‐coupling reactions. The X‐ray structures of eleven BODIPYs and two pyrroles are presented, and the spectroscopic properties of the synthesized BODIPYs are discussed.     

Nickel Supported on Alkaline Earth Metal–Doped γ-Al2O3–La2O3 as Catalysts for Dry Reforming of Methane

Russian Journal of Applied Chemistry - Nickel catalysts supported on γ–Al2O3 doped with La2O3 and alkaline earth oxides (MgO, CaO, and SrO) were investigated in the dry reforming of...     

Enhanced photocatalytic activity of zeolite-encapsulated TiO2 clusters by complexation with organic additives and N-doping.

In the literature it was found that titanium oxide clusters of a few metal atoms encapsulated inside the micropores of zeolite Y exhibit large blue shifts in the Ti-O ligand-to-metal charge-transfer band as compared to non-encapsulated bulk titanium dioxide particles. This blue shift of the Ti-O absorption band is believed to have a negative effect on the photocatalytic activity of zeolite-encapsulated TiO2. We report here on circumventing this problem and increasing visible-light absorption by means of a red shift of the absorption band caused by addition of some organic molecular modifiers containing acidic OH groups that can strongly bind with titanol groups TiOH. In the studied series of zeolite-encapsulated TiO2 samples, the red shift of the optical spectrum follows the order: catechol > 4-aminobenzoic acid > benzoic acid. Also N-doping of zeolite-encapsulated TiO2 clusters by thermal treatment with urea leads to a red shift of the TiO2 absorption band that depends on the annealing and hydration conditions. By comparison to the degradation of phenol in aqueous solution, we have demonstrated that these changes in the absorption spectrum on addition of the organic modifier are also reflected in the photocatalytic activity of the samples; a greater increase in photocatalytic activity (about 30%) was observed for the additive catechol.     

Electromechanical phase transition in hexacyanometallate nanostructure (Prussian Blue)

This paper demonstrates the importance of the structural changeover in controlling the physical-chemical properties of hexacyanometalate-like materials (Prussian Blue). A meticulous in situ study of compositional variations using electroacoustic impedance techniques associated to electrogravimetric techniques in hexacyanoferrates containing K+ alkali metals reveals the existence of a nanostructural changeover coupled to a change of the magnetic properties of these electromagnetic materials. In the same way, the electroacoustic impedance techniques can be useful both in the understanding and in the in situ monitoring of the structural changeovers and the magnetic behavior of all kinds of materials.     

Novel KF-TiO2catalysts for oxidative dehydrogenation of isobutane

A novel type of catalysts, KF-TiO₂, efficient for the oxidative dehydrogenation (ODH) of isobutane is presented. The effect of KF content and calcination temperature was studied. In the reaction conditions explored, the best performance (73 % selectivity to isobutene at 10.5 % conversion of isobutane) was observed over a catalyst with KF/TiO₂ = 0.2 (mol/mol). The surface properties of the catalysts were investigated by SPS (Surface Photo-voltage Spectroscopy) and XPS. The promotion effect of KF in the catalysts can be attributed to the formation of an oxyfluoro-compound, K₂Ti₄O₈F₂.     

Probing the Brønsted Acidity of the External Surface of Faujasite-Type Zeolites

We outline two methodologies to selectively characterize the Brønsted acidity of the external surface of FAU-type zeolites by IR and NMR spectroscopy of adsorbed basic probe molecules. The challenge and goal are to develop reliable and quantitative IR and NMR methodologies to investigate the accessibility of acidic sites in the large pore FAU-type zeolite Y and its mesoporous derivatives often referred to as ultra-stable Y (USY). The accessibility of their Brønsted acid sites to probe molecules (n-alkylamines, n-alkylpyridines, n-alkylphosphine- and phenylphosphine-oxides) of different molecular sizes is quantitatively monitored either by IR or ³¹P NMR spectroscopy. It is now possible, for the first time to quantitatively discriminate between the Brønsted acidity located in the microporosity and on the external surface of large pore zeolites. For instance, the number of external acid sites on a Y (LZY-64) zeolite represents 2 % of its total acid sites while that of a USY (CBV760) represents 4 % while the latter has a much lower framework Si/Al ratio.     

Influence of fused deposition modeling parameters on the mechanical properties of ABS parts

This work aims to determine the influence of fused deposition modeling (FDM) printing parameters on the mechanical properties of parts fabricated on an Ultimaker2 printer with acrylonitrile butadiene styrene (ABS). The effect of several parameters such as interlayer cooling time (ILCT), nozzle diameter, infill density, raster angle and layer thickness on the ultimate tensile strength, yield strength, and elastic modulus of produced parts was evaluated. Two independent studies were conducted: a first study dedicated to the ILCT and a second study where the influence of other parameters was evaluated through a design of experiments (DoE) approach. Both studies were carried out through the execution of standard tensile tests. The statistical analysis of tensile tests results was processed with the ANOVA methodology. The obtained results indicate that a reduced ILCT improves the tensile strength of parts. It is shown that nozzle diameter and infill density are the parameters that most influence the mechanical properties of ABS, with the upper range selected values improving the studied mechanical properties. The raster angle configuration of (?45^o/45^o) benefits UTS and yield strength of ABS samples. Interactions of nozzle diameter on layer thickness were detected. It was observed that smaller layer thickness promotes a higher elastic modulus and UTS; however, for thinner layers (0.06‐0.10 mm), no significant differences were found on strength of samples due to potential high distortion levels.     

The concept of proof in the light of mathematical work

ZDM – Mathematics Education - Our article aims to show how illuminating mathematical work as a concept from didactics of mathematics is useful in understanding issues relating to proving and...