Studies on the subcellular localization of the porphycene CPO

This study was designed to provide more detailed information on the subcellular sites of binding of the porphycene, termed 9-capronyloxytetrakis (methoxyethyl) porphycene (CPO), with a fluorescence resonance energy transfer (FRET) technique. The proximity of CPO to two fluorescent probes was determined: nonyl acridine orange (NAO), a dye with specific affinity for the mitochondrial lipid cardiolipin, and dihexa-oxacarbocyanine iodide (DiOC6), an agent that labels the endoplasmic reticulum (ER). FRET spectra indicated energy transfer between DiOC6 and CPO but no significant transfer between NAO and CPO. These results confirm data obtained by fluorescence microscopy, suggesting a similar pattern of subcellular localization by CPO and DiOC6 but not by CPO and NAO. However, when cells containing CPO were irradiated and then loaded with NAO, FRET between the two fluorophores was observed. Hence, a relocalization of CPO can occur during irradiation. These data provide an explanation for recent studies on CPO-catalyzed photodamage to both ER and mitochondrial Bcl-2.     

Preparation and sedimentation behavior in magnetic fields of magnetite-covered clay particles

This work is devoted to the preparation of magnetite-covered clay particles in aqueous medium. For this purpose, magnetite nanoparticles were synthesized by a coprecipitation method. These magnetic particles are adhered to sodium montmorillonite (NaMt) particles in aqueous suspensions of both materials, by appropriate control of the electrolyte concentrations. The best condition to produce such heteroaggregation corresponds to acid pH and approximately 1 mol/L ionic strength, when the electrokinetic potentials (zeta-potential) of both NaMt and Fe3O4 particles have high enough and opposite sign, as demonstrated from electrophoresis measurements. When a layer of magnetite re-covers the clay particles, the application of an external magnetic field induces a magnetic moment in clay-magnetite particles parallel to the external magnetic flux density. The sedimentation behavior of such magnetic particles is studied in the absence or presence of an external magnetic field in a vertical direction. The whole sedimentation behavior is also strongly affected by the formation of big flocculi in the suspensions under the action of internal colloidal interactions. van der Waals and dipole-dipole magnetic attractions between magnetite-covered clay particles dominate the flocculation processes. The different relative orientation of the clay-magnetite particles (edge-to-edge, face-to-edge, and face-to-face) are discussed in order to predict the most favored flocculi configuration.     

Rhodium(I) catalyzed four-component reaction of Fischer alkenyl carbene complexes and 1,1-diphenylallene

Alkyl substituted chromium Fischer carbene complexes react with 1,1-diphenylallene in the presence of rhodium(I) catalysts (10 mol%) to yield highly substituted dienyl indenone derivatives. In this process a catalytic chromium(0)-rhodium(I) exchange occurs, four new C-C bonds are created, and four-components (two allenes, the carbene ligand and one CO ligand) are joined in a chemo- and regioselective manner.     

Kinetics and mechanism of ligand interchange in the [RuIII(edta)L] complexes; L=Cysteine and related thiolates

Complexes of the [RuIII(edta)SR]n series, with SR–= deprotonated cysteine, N- acetylcysteine, 2–mercaptoethanol, glutathione and penicilamine, were prepared from [Ru(edta)H2O]– and the corresponding RSH thiols, at pH=5.5. The complexes exhibit intense visible absorption bands at ca. 520nm (3500M–1 cm–1), associated with LMCT from the sulfur ligands bound to RuIII. The kinetics of the formation reactions were first order in [RuIII(edta)H2O]– and thiol reactants, with k1 values ca. 1–5×102 M–1s–1 (25°C) for all the sulfur ligands except penicilamine, which reacted slower by a factor of 10. Activation parameters suggest an associative mechanism, as for the coordination of other S- and N-bound ligands to [RuIII(edta)H2O]–. A reactivity decrease is apparent at low and high pH's (ranges 1–3 and 8–10, respectively), associated with acid-base equilibria involving the less reactive [RuIII(Hedta)H2O] and [RuIII(edta)OH]2– species. A significant rate increase was found for cysteine and penicilamine at ca. pH=8.0, because the thiol reactants deprotonate. The equilibrium constants for all the ligands showed that robust complexes were formed, with K=ca. 1×105 M–1 (25°C). The dissociation rate constants, k–1, were in the 10–3–10–4 s–1 range. The influence of nucleophilic and steric effects increasing and decreasing the formation rates, respectively, is discussed for the thiolate ligands, with adequate comparisons with other L species bound to [RuIII(edta)H2O]–.     

Metal complexes with a new N(4)O(3) amine pendant-armed macrocyclic ligand: synthesis, characterization, crystal structures, and fluorescence studies

The synthesis of a new oxaaza macrocyclic ligand, L, derived from O(1),O(7)-bis(2-formylphenyl)-1,4,7-trioxaheptane and tren containing an amine terminal pendant arm, and its metal complexation with alkaline earth (M = Ca(2+), Sr(2+), Ba(2+)), transition (M = Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+)), post-transition (M = Pb(2+)), and Y(3+) and lanthanide (M = La(3+), Er(3+)) metal ions are reported. Crystal structures of [H(2)L](ClO(4))(2).3H(2)O, [PbL](ClO(4))(2), and [ZnLCl](ClO(4)).H(2)O are also reported. In the [PbL] complex, the metal ion is located inside the macrocyclic cavity coordinated by all N(4)O(3) donor atoms while, in the [ZnLCl] complex, the metal ion is encapsulated only by the nitrogen atoms present in the ligand. pi-pi interactions in the [H(2)L](ClO(4))(2).3H(2)O and [PbL](ClO(4))(2) structures are observed. Protonation and Zn(2+), Cd(2+), and Cu(2+) complexation were studied by means of potentiometric, UV-vis, and fluorescent emission measurements. The 10-fold fluorescence emission increase observed in the pH range 7-9 in the presence of Zn(2+) leads to L as a good sensor for this biological metal in water solution.     

Thermolytic carbonates for potential 5'-hydroxyl protection of deoxyribonucleosides

Thermolytic groups structurally related to well-studied heat-sensitive phosphate/thiophosphate protecting groups have been evaluated for 5'-hydroxyl protection of deoxyribonucleosides as carbonates and for potential use in solid-phase oligonucleotide synthesis. The spatial arrangement of selected functional groups forming an asymmetric nucleosidic 5'-O-carbonic acid ester has been designed to enable heat-induced cyclodecarbonation reactions, which would result in the release of carbon dioxide and the generation of a nucleosidic 5'-hydroxyl group. The nucleosidic 5'-O-carbonates 3-8, 10-15, and 19-21 were prepared and were isolated in yields ranging from 45 to 83%. Thermolytic deprotection of these carbonates is preferably performed in aqueous organic solvent at 90 degrees C under near neutral conditions. The rates of carbonate deprotection are dependent on the nucleophilicity of the functional group involved in the postulated cyclodecarbonation reaction and on solvent polarity. Deprotection kinetics increase according to the following order: 4 < 5 < 10 < 6 < 12 < 7 < 13 < 8 < 14 congruent with 19-21 and CCl4 < dioxane < MeCN < t-BuOH < MeCN:phosphate buffer (3:1 v/v, pH 7.0) < EtOH:phosphate buffer (1:1 v/v, pH 7.0). Complete thermolytic deprotection of carbonates 7, 8, 13, and 14 is achieved within 20 min to 2 h under optimal conditions in phosphate buffer-MeCN. The 2-(2-pyridyl)amino-1-phenylethyl and 2-[N-methyl-N-(2-pyridyl)]aminoethyl groups are particularly promising for 5'-hydroxyl protection of deoxyribonucleosides as thermolytic carbonates.     

Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns

A bisphenol A (BPA) molecularly imprinted polymer, the composition of which was optimised using a chemometric approach, has been applied to the selective preconcentration of the template from aqueous samples. The selectivity of the polymer toward BPA and related compounds was evaluated chromatographically. The BPA-imprinted polymer was packed in a column and used for continuous on-column solid-phase extraction (MISPE) of aqueous samples followed by subsequent analysis by HPLC with fluorescence detection of the eluted fractions. The composition of the washing solvent applied in the MISPE procedure was optimised to favour the specific interactions of the MIP with BPA and to remove the non-selectively bound matrix components. The MISPE method has proven to be effective for selective preconcentration of BPA in aqueous samples (recoveries >84% obtained in the eluate for 10–100 mL sample volumes) enabling detection and quantification limits of 1.0 and 3.3 ng mL^–1, respectively (based on 25 mL sample size). Analytical recoveries were between 92 and 101% for river water samples spiked with known amounts of BPA (30, 60, and 80 ng mL^–1); relative standard deviations (RSD) were lower than 5.0%.     

Influence of the metal loading on the electrocatalytic activity of carbon-supported (100) Pt nanoparticles

Journal of Solid State Electrochemistry - The influence of the metal loading (i.e. interparticle distance) of shape-controlled Pt nanoparticles on their electrocatalytic properties is evaluated for...