cis-UROCANIC ACID FAILED TO AFFECT in vitro HUMAN LANGERHANS CELL ALLOSTIMULATORY FUNCTION

Abstract— -Urocanic acid (UCA) represents the major ultraviolet B (UVB, 290–320 nm)-absorbing component of the skin. Trans-UCA is naturally produced in the stratum corneum and converts to the cis isomer upon UVB irradiation. In this study, we examined the effect of purified cis -UCA (about 99% of cis isomer) on the human Langerhans cell (LC) allostimulatory function by using the mixed epidermal cell-lymphocyte reaction (MELR). We found that addition of increasing amounts (6.5–400 μg/mL) of purified cis-UCA or (rara-UCA did not modify the T-cell response supported by enriched LC (eLC: 8–25% LC) as well as purified LC (pLC: 70–90% LC) suspensions. Because cis-UCA had no effect on the allostimulatory function of untreated LC, we investigated whether this compound could modify T-cell proliferation induced by UVB-irradiated LC. The UVB exposure of eLC or pLC to 100 J/m² significantly inhibited the capacity of both suspensions to mount a T-cell response. However, addition of cis- UCA did not potentiate this UVB-induced immunosuppression. The eLC or pLC were then incubated with cis-UCA for 18 h at 37°C and washed before adding to allogeneic T cells. The obtained proliferative response was similar to that induced by control LC incubated in medium alone, demonstrating that pretreatment with cis -UCA did not alter human LC function. In conclusion, these results strongly suggest that cis-UCA has no direct effect on human LC antigen-presenting function.     

Synthesis of 1,4-polyisoprene support of 2-chloroethylphosphonic acid (ethephon), a stimulating compound for the latex production by the Hevea brasiliensis

2-Chloroethylphosphonic acid (ethephon) is a well known stimulating product used to improve the latex production by the rubber tree (Hevea brasiliensis). Its chemical fixation in side position of 1,4-polyisoprene chains by weak chemical bond was considered in order to prepare new derivatives having prolonged stimulating activity. The synthesis was considered by using a chemical modification procedure according to a two-step process. Firstly, an epoxidized 1,4-polyisoprene intermediate was prepared by partial epoxidation of 1,4-polyisoprene. Secondly, the grafting of 2-chloroethylphosphonic acid was achieved by using the reactivity of the P-OH acidic function (or a P-OSiMe₃ derived from P-OH) of the reagent toward oxirane rings of epoxidized 1,4-polyisoprene. It was noted that grafting yields are improved when the reaction is carried out in bulk or in a non-polar solvent, and more especially in neutral conditions, that is by replacing ethephon with its trimethylsilylated derivatives [monotrimethylsilyl 2-chloroethylphosphonic acid or, more especially, di(trimethysilyl) 2-chloroethylphosphonate]. With this latter, the addition occurs by the intermediate of the P-OSiMe₃ bond, and the formation of 2-oxo-l,3,2-dioxaphospholane structures is highly favored.     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) at high temperature

The Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) were determined at temperatures of 24, 90, 120, 150, and 170°C for weight fractions of vinyl chloride between 0.2 × 10^?3 and 0.8 × 10^?3. Above 90°C, Henry's law applies; values of the constant increase with temperature from 1.8 × 10² to 5.5 × 10² atm per unit weight fraction of dissolved vinyl chloride. The heat of desorption is about 15 kJ/mole. At 24°C, the nominal Henry's law constant was smaller than would have been obtained by extrapolating the values found at higher temperature. The diffusion constants increase with temperature from about 2 × 10^?13 to 3 × 10^?7 cm²/sec. The activation energy for diffusion is about 110 kJ/mole between 90 and 170°C. Although all values were determined in the absence of air, it is likely that they apply to polymer in air. They may, therefore, be used to calculate the vinyl chloride content in the gas above poly(vinyl chloride) under specific processing conditions.     

Dihaloperhaloaryl(triphenylarsine)gold(III) Complexes

When C₆Cl₅AuAsPh₃ reacts with halogens, oxidation of the gold(I) complex and formation of X₂Au(C₆Cl₅)AsPh₃ (X = Cl, Br, I) take place. However, when C₆F₅AuAsPh₃ reacts with halogens, oxidation is only observed in the case of Cl₂, whilst I₂ (totally) and Br₂ (partially) split the AuC bond. This behaviour is contrary to that observed with C₆F₅AuPPh₃ and halogens, where the tendency to split the AuC bond decreases in the sequence Cl>B>I.     

Aggregation and reactivity of the cesium enolate of 6-phenyl-alpha-tetralone: comparison with the lithium enolate

The cesium enolate of 6-phenyl-alpha-tetralone (CsPAT) has a lambda(max) in THF at about 387 nm, but the variation with concentration is too small for application of singular value decomposition. Proton-transfer studies with several indicators show that CsPAT forms monomer-tetramer mixtures with a tetramerization equilibrium constant, K(1,4) = 2.3 x 10(11) M(-3). The pK of the monomer is 23.39 on a scale where fluorene is assigned 22.9 (per hydrogen). For comparison, the lithium enolate, LiPAT, is also a monomer-tetramer with K(1,4) = 4.7 x 10(10) M(-3) and a monomer pK = 14.22. HMPA in large amounts promotes dissociation to monomer with both enolates. Ion-pair S(N)2 initial rates were measured for CsPAT with several alkyl halides and with methyl tosylate and compared with other rates with LiPAT. In all cases, the enolate monomers are much more reactive than the aggregates. Reaction of CsPAT with alkyl halides is generally C-alkylation but HMPA promotes increasing amounts of O-alkylation. A new indicator, 11-methyl-11H-benzo[b]fluorene, has a pK on the cesium scale of 23.39.     

In situ soft X-ray studies of ethylene oxidation mechanisms and intermediates on the Pt(111) surface

In situ studies of ethylene oxidation on Pt(111) have been performed using a powerful combination of fluorescence yield soft X-ray methods for temperatures up to 600 K and oxygen pressures up to 0.01 Torr. Absolute carbon coverages have been determined both in steady-state and dynamic catalytic conditions on the Pt(111) surface. Fluorescence yield near-edge spectroscopy (FYNES) and temperature-programmed fluorescence yield near-edge spectroscopy (TP-FYNES) experiments above the carbon K edge were used to identify the structure and bonding of the dominant surface species during oxidation. TP-FYNES experiments of preadsorbed ethylene coverages in oxygen pressures up to 0.01 Torr indicate a stable intermediate is formed over the 215-300 K temperature range. By comparing the intensity of the C-H sigma resonance at the magic angle with the intensity in the carbon continuum, the stoichiometry of this intermediate has been determined explicitly. Based on calibration with known C-H stoichiometries, the intermediate has a C(2)H(3) stoichiometry for oxygen pressures up to 0.01 Torr, indicating oxydehydrogenation occurs before skeletal oxidation. FYNES spectra at normal and glancing incidences were performed to characterize the structure and bonding of this intermediate. Using FYNES spectra of ethylene, ethylidyne, and acetylene as reference standard, this procedure indicates the oxidation intermediate is tri-sigma vinyl. Thus, oxidation of ethylene proceeds through a vinyl intermediate, with oxydehydrogenation preceding skeletal oxidation.     

Dynamics of a surface phase transition as monitored by in situ second harmonic generation

The dynamics of the (2 x 2)-3CO <--> dilute phase transition involving CO adsorbed on Pt(111) microfacets has been monitored in situ in a CO-saturated acidic electrolyte using potential step-second harmonic generation techniques. Apparent time constants derived strictly from the optical data were found to be orders of magnitude slower for the forward process as compared to those of the reverse process. This behavior is consistent with the activated nature of CO electrooxidation, which requires the presence of a neighboring adsorbed oxygenated species, for example, hydroxyl, for the process to ensue.     

Syntheses of seven-membered rings: ruthenium-catalyzed intramolecular [5+2] cycloadditions

The Ru-catalyzed intramolecular [5+2] cycloaddition of cyclopropylenynes is investigated with respect to the regio- and diastereoselectivity as well as the functional group compatibility of the reaction. Evidence for the mechanism as occurring through a ruthenacyclopentene intermediate is elucidated from 1) the study of the diastereoselectivity of the cycloaddition; 2) the effect of variation of substituents on the regioselectivity of cyclopropyl bond cleavage in 1,2-trans- and 1,2-cis-disubstituted cyclopropanes and 3) examples that clearly do not involve ruthenacyclohexene as intermediates as products still incorporate the cyclopropyl moiety. The scope and limitations of the Ru-catalyzed cycloaddition are discussed and compared with the Rh-catalyzed reaction. The potential power of this methodology towards natural product total synthesis is demonstrated by the formation of several polycyclic systems with the chosen reaction conditions and readily available cyclopropylenyne substrates.     

Heats of adsorption of linear CO species adsorbed on the Au degrees and Ti+delta sites of a 1% Au/TiO2 catalyst using in situ FTIR spectroscopy under adsorption equilibrium

The heats of adsorption of two linear CO species adsorbed on the Au degrees particles (denoted L(Au degrees)) and on the Ti(+delta) sites (denoted L(Ti+delta)) of a 1% Au/TiO(2) catalyst are determined as the function of their respective coverage by using the AEIR procedure (adsorption equilibrium infrared spectroscopy) previously developed. Mainly, the evolutions of the IR band area of each adsorbed species (2184 cm(-1) for L(Ti+delta) and at 2110 cm(-1) for L(Au degrees)) as a function of the adsorption temperature T(a), at a constant CO adsorption pressure P(CO), provide the evolutions of the coverages theta(LTi+delta) and theta(LAu degrees ) of each adsorbed CO species with T(a) in isobar conditions that give the individual heats of adsorption. It is shown that they linearly vary from 74 to 47 kJ/mol for L(Au degrees ) and from 50 to 40 kJ/mol for L(Ti+delta) at coverages 0 and 1, respectively. These values are consistent with literature data on model Au particles and TiO(2). In particular, it is shown that the mathematical formalism supporting the AEIR procedure can be applied to literature data on Au-containing solids (single crystals and model particles).