Anionic polymerization of vinyl chloride

Anionic polymerization of vinyl chloride has been studied. Of the organometallic compounds tested as initiators, only butyllithium was found to initiate polymerization. Polymerization in bulk at 0°C and with tert-butyllithium as initiator gave poly(vinyl chloride) in a yield of 38% with M _n = 55,000. Tacticity of the anionic PVC was similar to that of conventional PVC prepared at similar temperatures. Anionic PVC was found to be less branched and more heat-stable than the conventional polymer.     

Neue stellungsisomere reineckesalzähnliche Verbindungen mit Toluidinen

Zusammenfassung Es wurden eine Reihe von Substitutionsreaktionen mit entwässertem K₃[Cr(NCS)₆] und aromatischen Aminen, ohne Verwendung von Lösungsmitteln, durchgeführt. Es wurde beobachtet, da die sehr schwachen Basen mit p_K-Werten 14–16, wie die isomeren Mono- und Dinitro-aniline, die Anthranil- und Sulfanilsäuren, für diese Substitutionsreaktionen ungeeignet sind. Die Alkyl-anilinderivate, wie daso-, m- undp-Toluidin (p_K=10–11) bilden dagegen leicht reineckesalzähnliche Verbindungen: Amin· H[Cr(Toluidin)₂(NCS)₄]. Die Zusammensetzung der neuen Komplexanionen wurde bei einer Reihe von doppelten Umsetzungsreaktionen mit den Chlorhydraten einiger heterocyclischen Aminen festgestellt.Für die Klärung einiger Strukturfragen wurden spektrophotometrische Untersuchungen im UV und IR durchgeführt und die thermische Stabilität bzw. der Mechanismus des Pyrolysenvorganges auf thermogravimetrischem Wege verfolgt.

---

Substitution reactions of anhydrous K₃[Cr(NCS)₆] with aromatic amines without applying of solvents were studied.It was observed, that the very weak bases (pK-values 14–16, e.g. isomeric mono- and dinitro-anilines, the anthranilic and sulfanilic acids) are unsuitable for substitution reactions. The alkylaniline derivates e.g.o-, m- andp-toluidine (pK=10–11) form easily reineckesalt analogous compounds: Amin· ·H[Cr(toluidine)₂(NCS)₄]·The formula of the 3 new complex anions: [Cr(toluidine)₂ (NCS)₄]- was established by preparative methods, with a series of double decomposition reactions, using chlorohydrates of some heterocyclic amines for this purpose. From spectroscopical investigations (UV and IR) some structural problems are resolved and discussed.The thermal stability and the mechanism of pyrolysis of these salts was studied by thermogravimetric analysis.

---

---

Mit 8 Abbildungen     

Retention of85Sr and147Pm on insoluble hydroxides and phosphates prepared by the sol-gel procedure

Retention of strontium and promethium on hydroxides (hydrated oxides) and phosphates of iron and chromium prepared by the sol-gel method was studied. The sorption was determined under static conditions depending on the pH of the solution. The sorption isotherms and retention were investigated under dynamic conditions.     

Intramolecular "Aryl-metal chelate ring" pi,pi-interactions as structural evidence for metalloaromaticity in (aromatic alpha,alpha'-diimine)-copper(II) chelates: molecular and crystal structure of aqua(1,10-phenanthroline)(2-benzylmalonato)copper(II) three-hydrate

By reaction of Cu(2)CO(3)(OH)(2), 2-benzylmalonic acid (H(2)Bzmal), and 1,10-phenanthroline (phen), [Cu(Bzmal)(phen)(H(2)O)] x 3H(2)O (compound 1) has been obtained and characterized by thermal, spectral, magnetic, and X-ray diffraction methods. The molecular structure of 1 is remarkably similar to that of [Cu(Bzmal)(bipy)(H(2)O)] x 2H(2)O (compound 2, bipy = 2,2'-bipyridine). In both complexes, the aryl(Bzmal) ring produces an unexpected pi,pi-stacking interaction with the Cu(II)-(aromatic alpha,alpha'-diimine) chelate ring, at an average distance d(pi)(-)(pi) of 3.40 A, involving roughly parallel and smoothly slipped rings. This insight is discussed as new structural evidence for metalloaromaticity of Cu(II)-(aromatic alpha,alpha'-diimine) chelate rings. Interestingly, 1 recognizes itself by a weak intermolecular pi,pi-stacking interaction between aryl(Bzmal) ligands to give pairs of complex molecules. In contrast, there is an intermolecular pyridyl-pyridyl pi,pi-stacking interaction also forming pairs of complex molecules in 2.     

Automation of the gas analysis of14C-labelled compounds utilizing a piston-type counter tube

In this paper an automatic apparatus designed for the radioactivity measurement of¹⁴C-labelled organic compounds in the gaseous phase is described. The labelled organic compounds are combusted in a mixture of argon and oxygen. After combustion the oxygen content of the gas is eliminated by passing it through a copper packing. The water and heteroelements present are also removed and the radioactive carbon dioxide gas is swept by argon carrier gas into a piston-type counter tube. In the counter tube the piston forming a dividing wall moves forward in accordance with the rate of combustion and sweeping, and thus sucks the gases leaving the combustion tube into the effective tube volume. The anode wire is carried by a reel located in the piston and a spring device ensures its stretched state. At the end of the sweeping period methane is fed into the counter tube and the activity of the argon—methane—carbon dioxide mixture is measured in the limited proportional region. Manual and automatic operation is possible. The piston-type counter tube provides possibility for strandardization by means of extrapolation and for measurement of absolute activities.     

Adsorption characteristics of a Hungarian natural mordenite and its acid treated derivatives

A mordenite-containing rock from the Tokaj-mountains was investigated. The effect of the treatment with hydrochloric acid solutions of various molarity was established. From gas adsorption measurements, scanning electron microscopic investigations and measurements with a mercury porosimeter conclusions were drawn on the changes caused by acid treatment. Slight changes in the texture were found, but no damage in the crystal structure could be observed.

---

- . . , - , , . - .

     

Some investigations on the photostabilization of polypropylene

The effect of substituted hydroxybenzophenone, benzotriazole and organic metal complexes on the photooxidation of PP films has been studied. It has been established that NiDBTC added in 1.0 wt. % is the most effective photostabilizer.While in the case of other stabilizers there is a slight increase in the Co content even during the induction period, with the application of NiDBTC practically no oxidation can be observed before the stabilizer completely disappears. This means that NiDBTC inhibits the photooxidation of the polymer even in low concentration.

---

, - . , Ni, 1,0 . %. . , Ni , . , Ni .

     

Synthesis and characterization of new di- and tri-nuclear cyano-bridged bis(dioximato)cobalt(III) complexes

Summary Several new neutral and cationic di- and tri-nuclear cyano-bridged bis(dioximato)cobalt(III) complexes have been synthesized and characterized (dioximato = dimethylglyoximato or diphenylglyoximato). These compounds are obtained through substitution of labile axial ligands by the nitrogen of the cyano-group in [Co(dioximato)₂(CN)₂]^– or [LCo(dioximato)₂(CN)] (L = H₂O, NH₃, or py). In the first case, the existence of only one band in the CN-stretching region of the i.r. spectrum at 2190–2200 cm^–1 is indicative of a trinuclear compound, while the presence of a second band at 2140 cm^–1 attributable to a terminal cyano-group indicates a dinuclear structure. In the presence of water, aquation of axial positions may take place at the same time as bridge formation, whereas the use of a non-aqueous solvent allows the preparation of complexes with pyridine or NH₃.     

Thermal reactivities of potassium and cadmium hydrogenhexavanadates

The thermal reactivities of KHV₆O₁₆·3H₂O and Cd(HV₆O₁₆)₂·12H₂O were investigated. By means of IR spectroscopy and X-ray phase analysis it was found that, after dehydration, both compounds decompose to vanadium pentoxide and the corresponding metavanadate. Potassium metavanadate and vanadium pentoxide react together to form bronzes of different compositions. In contrast, vanadium pentoxide and cadmium metavanadate are the predominant components of the reaction products obtained within the temperature range from 300° to 800°C.     

Thermal investigations on the crystallization of sorbitol

The melting and crystallization of sorbitol were investigated with the DSC method and thermal microscopy. Sorbitol was found to have two crystalline modifications (confirmed by X-ray diffraction) with different melting points, while rapid cooling of molten sorbitol resulted in an amorphous form. The effect of inoculation on the crystallization of the melt was studied too. Powders of both crystalline modifications were used for this purpose. A new technological process for rapid crystallization of molten sorbitol has been worked out on the basis of the thermal analysis results.