Combined OX40 Agonist and PD-1 Inhibitor Immunotherapy Improves the Efficacy of Vascular Targeted Photodynamic Therapy in a Urothelial Tumor Model

Purpose: Vascular targeted photodynamic therapy (VTP) is a nonsurgical tumor ablation approach used to treat early-stage prostate cancer and may also be effective for upper tract urothelial cancer (UTUC) based on preclinical data. Toward increasing response rates to VTP, we evaluated its efficacy in combination with concurrent PD-1 inhibitor/OX40 agonist immunotherapy in a urothelial tumor-bearing model. Experimental design: In mice allografted with MB-49 UTUC cells, we compared the effects of combined VTP with PD-1 inhibitor/OX40 agonist with those of the component treatments on tumor growth, survival, lung metastasis, and antitumor immune responses. Results: The combination of VTP with both PD-1 inhibitor and OX40 agonist inhibited tumor growth and prolonged survival to a greater degree than VTP with either immunotherapeutic individually. These effects result from increased tumor infiltration and intratumoral proliferation of cytotoxic and helper T cells, depletion of Treg cells, and suppression of myeloid-derived suppressor cells. Conclusions: Our findings suggest that VTP synergizes with PD-1 blockade and OX40 agonist to promote strong antitumor immune responses, yielding therapeutic efficacy in an animal model of urothelial cancer.     

Calorimetric study of spinodal decomposition in β-Cu–Al–Mn

Journal of Thermal Analysis and Calorimetry - We report data obtained from the spinodal decomposition in samples of two compositions of intermetallic Cu–Al–Mn shape memory alloys....     

Evaluating the freeze–thaw phenomenon in sandwich-structured composites via numerical simulations and infrared thermography

Journal of Thermal Analysis and Calorimetry - The water ingress phenomenon in sandwich-structured composites used in the aerospace/aeronautical sector is a current issue. This type of defect can...     

A Combined Experimental and Theoretical Study on the Formation of Ag Filaments on β‐Ag2MoO4 Induced by Electron Irradiation

A combined experimental and theoretical study is presented to understand the novel observed nucleation and early evolution of Ag filaments on β‐Ag₂MoO₄ crystals, driven by an accelerated electron beam from an electronic microscope under high vacuum. The growth process, chemical composition, and the element distribution in these filaments are analyzed in depth at the nanoscale level using field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) with energy‐dispersive spectroscopy (EDS) characterization. To complement experimental results, chemical stability, structural and electronic aspects have been studied systematically using first‐principles electronic structure theory within a quantum theory of atoms in molecules (QTAIM) framework. The Ag nucleation and formation on β‐Ag₂MoO₄ are a result of structural and electronic changes of the AgO₄ tetrahedral cluster as a constituent building block of β‐Ag₂MoO₄, consistent with Ag metallic formation. The formation of Ag filament transforms the β‐Ag₂MoO₄ semiconductor from n‐ to p‐type concomitant with the appearance of Ag defects.     

Solubility enhancement of ibuprofen using tri-ureasil-PPO hybrid: structural,cytotoxic, and drug release investigation

Herein, we used tri-ureasil organic–inorganic hybrid material (tU5000) in order to enhance the solubility of nonsteroidal anti-inflammatory drugs and fine tuning the drug delivery profile. For the first time, we used tU5000 as a film-forming agent in order to provide an alternative vehicle for transdermal drug delivery systems which the cell viability of practically 100 % for the highest and the lowest tested concentrations of pure tU5000 indicated that the material was not cytotoxic. The physicochemical properties of the tU5000 drug carrier and drug-loaded hybrids were systematically studied using powder X-ray diffraction, differential scanning calorimetry, small-angle X-ray scattering, and Fourier-transform infrared spectroscopy. The structural changes of tU5000 as well as the relationships between the drug content and in vitro drug release behaviors were investigated. The results showed that the ibu molecules were homogeneously distributed in the tU5000 xerogels contributing to fine-tuning the drug delivery profile. Considering the ability to incorporated high drug content, simple and mild preparation procedure by one-pot sol–gel route, high stability of the materials, sustained-release property, this class of hybrid based on polymers and inorganic compounds may have potential applications in the design of pharmaceutical formulation as ophthalmic (contact lenses), transdermal (patches) and implantable (soft tissue) drug delivery systems.     

Hydrophilic–oleophobic coatings on cellulosic materials by plasma assisted polymerization in liquid phase and fluorosurfactant complexation

Materials with hydrophilic–oleophobic properties are of relevance due to their application to different fields such as self-cleaning coatings, liquid–liquid separation membranes and functional textiles for different technical applications. In this work, hydrophilic–oleophobic coatings have been deposited on cellulosic materials (filter paper and bleached cotton) by means of plasma assisted polymerization of acrylic acid solutions in water followed by cationic fluorosurfactant complexation. Chemical composition of the coatings on cellulosic materials was characterized by means of FTIR–ATR and XPS whereas their morphology was studied by SEM. Hydrophilic–oleophobic behavior was characterized by means of contact angle and wetting time. Additionally wetting properties of cationic, anionic and non-ionic surfactant solutions on the hydrophilic–oleophobic coatings were used to characterize the polyelectrolyte electrostatic forces upon the functionalized layer.     

A Dynamic Model for Cellulosic Biomass Hydrolysis: a Comprehensive Analysis and Validation of Hydrolysis and Product Inhibition Mechanisms

The objective of this study is to perform a comprehensive enzyme kinetics analysis in view of validating and consolidating a semimechanistic kinetic model consisting of homogeneous and heterogeneous reactions for enzymatic hydrolysis of lignocellulosic biomass proposed by the U.S. National Renewable Energy Laboratory (Kadam et al., Biotechnol Prog 20(3):698–705, 2004) and its variations proposed in this work. A number of dedicated experiments were carried out under a range of initial conditions (Avicel® versus pretreated barley straw as substrate, different enzyme loadings and different product inhibitors such as glucose, cellobiose and xylose) to test the hydrolysis and product inhibition mechanisms of the model. A nonlinear least squares method was used to identify the model and estimate kinetic parameters based on the experimental data. The suitable mathematical model for industrial application was selected among the proposed models based on statistical information (weighted sum of square errors). The analysis showed that transglycosylation plays a key role at high glucose levels. It also showed that the values of parameters depend on the selected experimental data used for parameter estimation. Therefore, the parameter values are not universal and should be used with caution. The model proposed by Kadam et al. (Biotechnol Prog 20(3):698–705, 2004) failed to predict the hydrolysis phenomena at high glucose levels, but when combined with transglycosylation reaction(s), the prediction of cellulose hydrolysis behaviour over a broad range of substrate concentrations (50–150 g/L) and enzyme loadings (15.8–31.6 and 1–5.9 mg protein/g cellulose for Celluclast and Novozyme 188, respectively) was possible. This is the first study introducing transglycosylation into the semimechanistic model. As long as these type of models are used within the boundary of their validity (substrate type, enzyme source and substrate concentration), they can support process design and technology improvement efforts at pilot and full-scale studies.     

A water- and sulfurization-free solution route to Cu2-xZn1+xSnS4

Zinc-rich/copper-poor Cu_2-xZn_1+xSnS₄ (x = 0.2, CZTS) has been successfully produced in film and powder form using two non-aqueous solutions (of metal salts and thiourea) without the need for sulfurization during the annealing phase. A reaction route is proposed and the choices of the solvents (water, ethyleneglycol, ethanol, methanol) and of the tin source (tin chloride pentahydrate or anhydrous) discussed and justified. A pure and coarse-grained material is obtained with a mix of metal salts in methanol and thiourea in ethylene glycol. The tin pentahydrate salt seems a better alternative to the commonly used anhydrous chloride.     

Distributed and multicore QuBiLS-MIDAS software v2.0: Computing chiral,fuzzy, weighted and truncated geometrical molecular descriptors based on tensor algebra

Advances to the distributed, multi-core and fully cross-platform QuBiLS-MIDAS software v2.0 ( http://tomocomd.com/qubils-midas ) are reported in this article since the v1.0 release. The QuBiLS-MIDAS software is the only one that computes atom-pair and alignment-free geometrical MDs (3D-MDs) from several distance metrics other than the Euclidean distance, as well as alignment-free 3D-MDs that codify structural information regarding the relations among three and four atoms of a molecule. The most recent features added to the QuBiLS-MIDAS software v2.0 are related (a) to the calculation of atomic weightings from indices based on the vertex-degree invariant (e.g., Alikhanidi index); (b) to consider central chirality during the molecular encoding; (c) to use measures based on clustering methods and statistical functions to codify structural information among more than two atoms; (d) to the use of a novel method based on fuzzy membership functions to spherically truncate inter-atomic relations; and (e) to the use of weighted and fuzzy aggregation operators to compute global 3D-MDs according to the importance and/or interrelation of the atoms of a molecule during the molecular encoding. Moreover, a novel module to compute QuBiLS-MIDAS 3D-MDs from their headings was also developed. This module can be used either by the graphical user interface or by means of the software library. By using the library, both the predictive models built with the QuBiLS-MIDAS 3D-MDs and the QuBiLS-MIDAS 3D-MDs calculation can be embedded in other tools. A set of predefined QuBiLS-MIDAS 3D-MDs with high information content and low redundancy on a set comprised of 20,469 compounds is also provided to be employed in further cheminformatics tasks. This set of predefined 3D-MDs evidenced better performance than all the universe of Dragon (v5.5) and PaDEL 0D-to-3D MDs in variability studies, whereas a linear independence study proved that these QuBiLS-MIDAS 3D-MDs codify chemical information orthogonal to the Dragon 0D-to-3D MDs. This set of predefined 3D-MDs would be periodically updated as long as new results be achieved. In general, this report highlights our continued efforts to provide a better tool for a most suitable characterization of compounds, and in this way, to contribute to obtaining better outcomes in future applications.