Evaluation of tip-enhanced Raman spectroscopy for characterizing different virus strains

Tip-enhanced Raman spectroscopy (TERS) is a highly sensitive spectroscopic technique which combines the advantages of optical spectroscopy with the requirements needed for the characterization of biological nano-structures. In this study, TERS was used to investigate the applicability of this spectroscopic technique for the detection of different virus strains like avipoxvirus and adeno-associated virus. TERS spectra obtained from different particles of the same virus strain show variations in relative peak intensities and positions of most spectral features observed. These spectral variations were higher for the larger avipoxvirus particles (?≈350 nm) than for the smaller adeno-associated virus particles (?≈26 nm).     

Fast characterization of functionalized silica materials by silicon-29 surface-enhanced NMR spectroscopy using dynamic nuclear polarization

We demonstrate fast characterization of the distribution of surface bonding modes and interactions in a series of functionalized materials via surface-enhanced nuclear magnetic resonance spectroscopy using dynamic nuclear polarization (DNP). Surface-enhanced silicon-29 DNP NMR spectra were obtained by using incipient wetness impregnation of the sample with a solution containing a polarizing radical (TOTAPOL). We identify and compare the bonding topology of functional groups in materials obtained via a sol-gel process and in materials prepared by post-grafting reactions. Furthermore, the remarkable gain in time provided by surface-enhanced silicon-29 DNP NMR spectroscopy (typically on the order of a factor 400) allows the facile acquisition of two-dimensional correlation spectra.     

Syntheses of octasubstituted zinc azaphthalocyanines with thiophene or thiophene combined with sulfanyl,amino or imido substituents: Influence of the substituents on photochemical and photophysical properties

Several octasubstituted zinc azaphthalocyanines (ZnAzaPcs) of the tetrapyrazinoporphyrazine type have been synthesized as potential sensitizers for photodynamic therapy (PDT). Octasubstituted complexes, with thiophen-2-yl, thiophen-3-yl or benzo[b]thiophen-3-yl peripheral groups, were synthesized and characterized. Octa(thiophen-2-yl) ZnAzaPc is a better singlet oxygen producer and has a red shifted UV absorption Q-band compared to both thiophen-3-yl and benzo[b]thiophen-3-yl substituted ZnAzaPcs. Thus, the thiophen-2-yl substituent is better suited for our purpose. Unsymmetrically substituted ZnAzaPcs were synthesized by cyclotetramerisations of pyrazine-2,3-dicarbonitriles attached to one thiophen-2-yl group and one alkylsulfanyl, thiomorpholinyl or imide group. Constitutional isomers were detected by NMR spectroscopy for some of these complexes. Compared to unsubstituted ZnAzaPc, red shifted Q-bands were observed for all these complexes, due to the presence of thiophen-2-yl groups. The least promising complexes are ZnAzaPcs with thiomorpholine or imide peripheral substituents, i.e. where the peripheral substituents are attached to the macrocycle through nitrogen atoms. Low singlet oxygen quantum yields (Φ_Δ) and also low fluorescence quantum yields (Φ_F) were observed for these ZnAzaPcs. In the case of combined thiophen-2-yl and alkylsulfanyl substituents, the values of Φ_Δ were the highest and reached values of approximately 0.69.     

How to generate peak capacity in column liquid chromatography. The Halász nomograms revised

For the separation of complex samples it is necessary to run the analyses on a chromatographic set-up with high peak capacity. The concept of peak capacity is broader than the one of the theoretical plate numbers because it covers both the column characteristics and the run time of the separation. Therefore, a desired peak capacity can be obtained with many combinations of particle diameter, column length, pressure, and analysis time: either with a short column, small-diameter packing, short analysis time, and high pressure; or with less pressure at the expense of a longer column, larger-diameter packing, and longer analysis time. These combinations can be presented in the form of nomograms with the analysis time as x-axis and the peak capacity as y-axis and including particle diameter, column length, and pressure as parameters. The practical limits of the peak capacity are given by the maximum pressure delivered by the pump in use. These considerations are valid for isocratic and gradient separations as well. They are based on a 1982 paper by Halász and G?rlitz and apply the concept of HPLC columns used at their Van Deemter optimum.     

Impedimetric Detection of DNA Damage with the Sensor Based on Silver Nanoparticles and Neutral Red

Novel electrochemical DNA‐sensor based on glassy carbon electrode (GCE) modified with Ag nanoparticles, Neutral red covalently attached to its surface and native DNA adsorbed on modifier coating was developed for the estimation of DNA damage on example of model system based on Fenton reagent. As was shown, the oxidation process resulted in synchronous increase of electron transfer resistance and capacitance measured by electrochemical impedance spectroscopy (EIS). The contribution of each sensor component on the signal was specified and sensitivity estimated against similar surface coatings. The shift of EIS parameters was found to be higher than that of similar biosensors reported. The DNA sensor was tested on the estimation of antioxidant capacity of green tea infusions again the results of coulometric titration with electrogenerated bromine.     

Preparation and Regioselective Metalation of Bis(trimethylsilyl)methyl‐Substituted Aryl Derivatives

A range of bis(trimethylsilyl)methyl‐substituted aryl derivatives was prepared by using a Kumada–Corriu cross‐coupling reaction. The regioselective metalation of the resulting bis(trimethylsilyl)methyl‐substituted aryl derivatives bearing this bulky silyl group allowed the generation of functionalized aromatics. A regioselective switch in the presence or in the absence of the bis(trimethylsilyl)methyl group has been demonstrated. Furthermore, this silyl group was converted into a formyl group or a styryl group, enhancing the scope of application of such bis(trimethylsilyl)methyl‐substituted arenes.     

The Family of Ferrocene‐Stabilized Silylium Ions: Synthesis, 29Si NMR Characterization,Lewis Acidity,Substituent Scrambling,and Quantum‐Chemical Analyses

The purpose of this systematic experimental and theoretical study is to deeply understand the unique bonding situation in ferrocene‐stabilized silylium ions as a function of the substituents at the silicon atom and to learn about the structure parameters that determine the ²⁹Si NMR chemical shift and electrophilicity of these strong Lewis acids. For this, ten new members of the family of ferrocene‐stabilized silicon cations were prepared by a hydride abstraction reaction from silanes with the trityl cation and characterized by multinuclear ¹H and ²⁹Si NMR spectroscopy. A closer look at the NMR spectra revealed that additional minor sets of signals were not impurities but silylium ions with substitution patterns different from that of the initially formed cation. Careful assignment of these signals furnished experimental proof that sterically less hindered silylium ions are capable of exchanging substituents with unreacted silane precursors. Density functional theory calculations provided mechanistic insight into that substituent transfer in which the migrating group is exchanged between two silicon fragments in a concerted process involving a ferrocene‐bridged intermediate. Moreover, the quantum‐chemical analysis of the ²⁹Si NMR chemical shifts revealed a linear relationship between δ(²⁹Si) values and the Fe???Si distance for subsets of silicon cations. An electron localization function and electron localizability indicator analysis shows a three‐center two‐electron bonding attractor between the iron, silicon, and C′_ipso atoms, clearly distinguishing the silicon cations from the corresponding carbenium ions and boranes. Correlations between ²⁹Si NMR chemical shifts and Lewis acidity, evaluated in terms of fluoride ion affinities, are seen only for subsets of silylium ions, sometimes with non‐intuitive trends, indicating a complicated interplay of steric and electronic effects on the degree of the Fe???Si interaction.