Syntheses of octasubstituted zinc azaphthalocyanines with thiophene or thiophene combined with sulfanyl,amino or imido substituents: Influence of the substituents on photochemical and photophysical properties

Several octasubstituted zinc azaphthalocyanines (ZnAzaPcs) of the tetrapyrazinoporphyrazine type have been synthesized as potential sensitizers for photodynamic therapy (PDT). Octasubstituted complexes, with thiophen-2-yl, thiophen-3-yl or benzo[b]thiophen-3-yl peripheral groups, were synthesized and characterized. Octa(thiophen-2-yl) ZnAzaPc is a better singlet oxygen producer and has a red shifted UV absorption Q-band compared to both thiophen-3-yl and benzo[b]thiophen-3-yl substituted ZnAzaPcs. Thus, the thiophen-2-yl substituent is better suited for our purpose. Unsymmetrically substituted ZnAzaPcs were synthesized by cyclotetramerisations of pyrazine-2,3-dicarbonitriles attached to one thiophen-2-yl group and one alkylsulfanyl, thiomorpholinyl or imide group. Constitutional isomers were detected by NMR spectroscopy for some of these complexes. Compared to unsubstituted ZnAzaPc, red shifted Q-bands were observed for all these complexes, due to the presence of thiophen-2-yl groups. The least promising complexes are ZnAzaPcs with thiomorpholine or imide peripheral substituents, i.e. where the peripheral substituents are attached to the macrocycle through nitrogen atoms. Low singlet oxygen quantum yields (Φ_Δ) and also low fluorescence quantum yields (Φ_F) were observed for these ZnAzaPcs. In the case of combined thiophen-2-yl and alkylsulfanyl substituents, the values of Φ_Δ were the highest and reached values of approximately 0.69.     

Hydrogen-bonded polymer multilayers probed by neutron reflectivity

We present a neutron reflectivity study of the internal structure of multilayers made of a weak polyelectrolyte and a neutral component where interactions between adjacent layers are controlled by hydrogen-bonding. We found the degree of interpenetration of polymer layers expressed as the interlayer roughness to be strongly correlated with the strength of intermolecular interactions between the adjacent layers. In addition, polymer layers become more diffuse with a distance from the substrate. Our results demonstrate that hydrogen-bonded films exhibit a close correlation between their structure and properties, which is essential for various applications.     

Formation of coordination compounds with aniline in the interlayer space of Ca<Superscript>2+</Superscript>-, Cu<Superscript>2+</Superscript>- and Fe<Superscript>3+</Superscript>-exchanged montmorillonite

The influence of Ca²⁺-, Cu²⁺- and Fe³⁺-exchanged montmorillonite (MMT) on the type of interaction with aniline in the interlayer space of MMT has been studied by means of X-ray powder diffraction and infrared spectra. Results of X-ray diffraction showed that aniline was successfully intercalated into the interlayer space of MMT. Based on IR spectra evaluation, aniline was indirectly coordinated through a water-bridge in Ca²⁺- and Fe³⁺-MMT and it was indirectly coordinated through a water-bridge as well as protonated in Cu²⁺-MMT (the spectrum of protonated aniline showed deformation and changes in the NH ₃ ⁺ absorption at approximately 1521 cm^?1). It is important to point out that Cu²⁺-MMT indirect coordination and protonation occur simultaneously.     

Optimization of o‐phtaldialdehyde/2‐mercaptoethanol postcolumn reaction for the hydrophilic interaction liquid chromatography determination of memantine utilizing a silica hydride stationary phase

A rapid procedure for the determination of memantine based on hydrophilic interaction chromatography with fluorescence detection was developed. Fluorescence detection after postcolumn derivatization with o‐phtaldialdehyde/2‐mercaptoethanol was performed at excitation and emission wavelengths of 345 and 450 nm, respectively. The postcolumn reaction conditions such as reaction temperature, derivatization reagent flow rate, and reagents concentration were studied due to steric hindrance of amino group of memantine. The derivatization reaction was applied for the hydrophilic interaction liquid chromatography method which was based on Cogent Silica‐C stationary phase with a mobile phase consisting of a mixture of 10 mmol/L citric acid and 10 mmol/L o‐phosphoric acid (pH 6.0) with acetonitrile using an isocratic composition of 2:8 v/v. The benefit of the reported approach consists in a simple sample pretreatment and a quick and sensitive hydrophilic interaction chromatography method. The developed method was validated in terms of linearity, accuracy, precision, and selectivity according to the International Conference on Harmonisation guidelines. The developed method was successfully applied for the analysis of commercial memantine tablets.     

Isotachophoretic determination of hydrosulfite and metabisulfite in technical samples

A method for determination of metabisulfite and hydrosulfite in poultice and decolorant by isotachophoresis was developed. Metabisulfite and hydrosulfite are ionizable oxoanions of sulfur of similar character that can easily be oxidized to sulfates. To protect the analytes from oxidation the solid samples were dissolved in a 1% (w/v) solution of formaldehyde. Hydrosulfite and metabisulfite present in the samples were transformed by the reaction with formaldehyde to stable compounds, hydroxymethanesulfinate and hydroxymethanesulfonate that were determined isotachophoretically without any pretreatment except for sample filtering and degassing. A capillary of 0.4 mm i.d. and 100 mm effective length made of fluorinated ethylene-propylene copolymer was filled with an electrolyte system consisting of 10 mmol L⁻¹ HCl + 11 mmol L⁻¹ imidazole, 0.15% (w/v) hydroxyethylcellulose, pH 6.0 (leading electrolyte) and 5 mmol L⁻¹ benzoic acid + 6 mmol L⁻¹ imidazole, pH 6.5 (terminating electrolyte). Separation was performed at a driving current of 80 μA and for detection current was decreased to 30 μA. Using contactless conductivity detection, the calibration curves in the tested concentration range up to 2.5 mmol L⁻¹ were linear for both metabisulfite and hydrosulfite complexes. The concentration detection limits for metabisulfite and hydrosulfite were 2.9 and 3.4 μmol L⁻¹, respectively. For 1 mmol L⁻¹ concentration, values of R.S.D. (n = 6) were 2.6% for hydrosulfite and 0.8% for metabisulfite. Isotachophoretic determination took about 20 min. The elaborated isotachophoretic procedure is simple to perform, sufficiently sensitive and accurate. In addition to this, low cost of analyses makes the method an alternative procedure to methods used so far for the determination of oxoanions of sulfur.     

Model systems for probing metal cation hydration: the V+(H2O) and ArV+(H2O) complexes

In support of mass-selected infrared photodissociation (IRPD) spectroscopy experiments, coupled-cluster methods including all single and double excitations (CCSD) and a perturbative contribution from connected triple excitations [CCSD(T)] have been used to study the V+(H2O) and ArV+(H2O) complexes. Equilibrium geometries, harmonic vibrational frequencies, and dissociation energies were computed for the four lowest-lying quintet states (5A1, 5A2, 5B1, and 5B2), all of which appear within a 6 kcal mol(-1) energy range. Moreover, anharmonic vibrational analyses with complete quartic force fields were executed for the 5A1 states of V+(H2O) and ArV+(H2O). Two different basis sets were used: a Wachters+f V[8s6p4d1f] basis with triple-zeta plus polarization (TZP) for O, H, and Ar; and an Ahlrichs QZVPP V[11s6p5d3f2g] and Ar[9s6p4d2f1g] basis with aug-cc-pVQZ for O and H. The ground state is predicted to be 5A1 for V+(H2O), but argon tagging changes the lowest-lying state to 5B1 for ArV+(H2O). Our computations show an opening of 2 degrees -3 degrees in the equilibrium bond angle of H2O due to its interaction with the metal ion. Zero-point vibrational averaging increases the effective bond angle further by 2.0 degrees -2.5 degrees, mostly because of off-axis motion of the heavy vanadium atom rather than changes in the water bending potential. The total theoretical shift in the bond angle of about +4 degrees is significantly less than the widening near 9 degrees deduced from IRPD experiments. The binding energies (D0) for the successive addition of H2O and Ar to the vanadium cation are 36.2 and 9.4 kcal mol(-1), respectively.     

Influence of aggregation on interaction of lipophilic, water-insoluble azaphthalocyanines with DOPC vesicles

Dioleoylphosphatidylcholine unilamellar vesicles made by extrusion technique (LUVETs) were studied as the delivery system for lipophilic water-insoluble potential photosensitizers for photodynamic therapy (PDT). Two azaphthalocyanines (AzaPcs) with hydrophobic substituents only and two also possessing two charged amino groups were introduced into the study. All compounds are insoluble in water and form aggregates in PBS with tetrahydrofuran as cosolvent. The size of these aggregates depends on the concentration of AzaPc in solution. AzaPcs with tert-butyl substituents were found to be incorporated into the lipid bilayer of vesicles in the monomeric form even at high concentrations. The stability of LUVETs with incorporated AzaPc was excellent for at least 4 weeks. Therefore, they are suitable for use as a delivery system for these water-insoluble photosensitizers. Very low amount of AzaPc with n-octyl substituents incorporated into LUVETs due to its stronger self-aggregation. Values of binding constants determined for all AzaPcs showed inverse order than expected from their lipophilicities. However, the binding constants followed the order of the strength of aggregation forces. Aggregation of AzaPcs in water medium plays a very important role in the interaction of AzaPcs with LUVETs.     

Fragmentation‐related phosphinylations using 2‐aryl‐2‐phosphabicyclo[2.2.2]oct‐ 5‐ene‐ and ‐octa‐5,7‐diene 2‐oxides

A series of new P‐methylphenyl P‐heterocycles are introduced. The para and ortho substituted 2,5‐dihydro‐1H‐phosphole oxides ( 1a and 1b ) were converted to the double‐bond isomers ( A and B ) of 1,2‐dihydrophosphinine oxides ( 3a and 3b ) via the corresponding phosphabicyclo[3.1.0]hexane oxides ( 2a or 2b ). Isomeric mixture ( A and B ) of the dihydrophosphinine oxides ( 3a and 3b ) gave, in turn, the isomers ( A and B ) of phosphabicyclo[2.2.2]oct‐5‐enes ( 4a and 4b ) or a phosphabicyclo[2.2.2]octa‐5,7‐diene ( 5 ) in Diels‐Alder reaction with dienophiles. The bridged P‐heterocycles ( 4 and 5 ) were useful in the photo‐ or thermoinduced fragmentation‐related phosphinylation of hydroxy compounds and amines. The new precursors ( 4a and 4b ) were applied in mechanistic investigations. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:443–451, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10176