Luminescent lanthanide ions hosted in a fluorescent polylysin dendrimer. Antenna-like sensitization of visible and near-infrared emission

We have investigated the complexation of the luminescent Nd(3+), Eu(3+), Gd(3+), Tb(3+), Er(3+), and Yb(3+) ions by a polylysin dendrimer containing 21 amide groups in the interior and, in the periphery, 24 chromophoric dansyl units which show an intense fluorescence band in the visible region. Most of the experiments were performed in 5:1 acetonitrile/dichloromethane solution at 298 K. On addition of the lanthanide ions to dendrimer solutions, the fluorescence of the dansyl units is quenched; in Nd(3+), Er(3+), and Yb(3+), a sensitized near-infrared emission of the lanthanide ion is observed. At low metal ion concentrations, each dendrimer hosts only one metal ion and when the hosted metal ion is Nd(3+) or Eu(3+), the fluorescence of all the 24 dansyl units of the dendrimer is quenched with unitary efficiency. Quantitative measurements were performed in a variety of experimental conditions, including protonation of the dansyl units and measurements in rigid matrix at 77 K where a sensitized Eu(3+) emission could also be observed. The results obtained have been interpreted on the basis of the energy levels and redox potentials of dendrimer and metal ions.     

Scalable synthesis of an integrin-binding peptide mimetic for biomedical applications

A scalable, solution-phase synthesis of the selectively protected non-peptide RGD (arginine-glycine-aspartic acid) mimetic 6 is described. This synthesis serves as an alternative to the previously described solid-phase synthesis of this compound, thereby making this important integrin-binding mimetic readily accessible. The free carboxylic acid of 6 was conjugated to a protected diamine, followed by global deprotection to give a derivative 27, suitable for immobilization onto amine-reactive surfaces. The RGD mimetic 28 demonstrated superior biological activity in comparison to a native linear RGD peptide and the semi-synthetic cyclic cRGDfK peptide in a cell attachment inhibition assay.     

Application of the QuEChERS method for the analysis of pyrethrins and pyrethroids in fish tissues

The application of the quick easy cheap effective rugged and safe (QuEChERS) method has generally been used in the preparation of produce samples (e.g., lettuce and oranges) for pesticide analysis. In the present study, the QuEChERS method was successfully applied to the determination of the natural pyrethrins (cinerin I and II, jasmolin I and II, and pyrethrin I and II), as well as two pyrethroid insecticides, cypermethrin and deltamethrin, in fin and non-fin fish products. Analysis of these compounds was performed using gas chromatography–mass spectrometry. Although cypermethrin is not and has not been registered for pest control use in aquaculture operations in Canada, cypermethrin was detected in domestically produced salmon. Cypermethrin was detected in seven of the 18 Canadian farmed salmon samples (39%), although it was not detected in any wild domestic salmon (n = 3). Cypermethrin concentrations ranged from 0.3 to 6.5 ng/g in the positive samples. It was not, however, observed in any imported fish product or any other domestically produced fish product.     

Thermal and mechanical characterization of plasticized poly (L-lactide-co-D,L-lactide) films for food packaging

In this work amorphous poly(L-lactide-co-D,L-lactide) (PLLA/PDLLA) was blended with four different commercial adipates to obtain films with enhanced mechanical and thermal properties. Efficiency of plasticizers was evaluated by studying their compatibility with the polymer and their effect on its glass transition temperature. All plasticizers were compatible with the matrix up to a critical composition depending on its molar mass. The addition of plasticizers caused a decrease in elastic modulus and tensile stress, meanwhile elongation at break had a maximum increase for polyadipates with the lower molar mass. Monomeric adipate showed some migration at concentration higher than 10 mass%, while the addition of the higher molar mass plasticizer lead to eventual phase separation. Polyadipates with low molar mass showed a promising behaviour to overcome the brittleness in PLLA/PDLLA films.     

Chemical Synthesis of Native S-Palmitoylated Membrane Proteins through Removable-Backbone-Modification-Assisted Ser/Thr Ligation

The preparation of native S-palmitoylated (S-palm) membrane proteins is one of the unsolved challenges in chemical protein synthesis. Herein, we report the first chemical synthesis of S-palm membrane proteins by removable-backbone-modification-assisted Ser/Thr ligation (RBM^GABA-assisted STL). This method involves two critical steps: 1) synthesis of S-palm peptides by a new γ-aminobutyric acid based RBM (RBM^GABA) strategy, and 2) ligation of the S-palm RBM-modified peptides to give the desired S-palm product by the STL method. The utility of the RBM^GABA-assisted STL method was demonstrated by the synthesis of rabbit S-palm sarcolipin (SLN) and S-palm matrix-2 (M2) ion channel. The synthesis of S-palm membrane proteins highlights the importance of developing non-NCL methods for chemical protein synthesis.     

Profiling of non-esterified fatty acids in human plasma using liquid chromatography-electron ionization mass spectrometry

This paper focuses on the development of a novel approach to analyze underivatized fatty acids in human plasma. The method is based on liquid–liquid extraction followed by reversed phase liquid chromatography coupled to direct-electron ionization mass spectrometry (LC-Direct-EI-MS). The assay is validated. Calibrations show satisfactory linearity and precision in the investigated range of linearity. Recoveries span from 75% to 104%. The method limits of detection, varying from 0.53 to 5.35 μM, are satisfactory for the quantitation of non-esterified fatty acids (NEFAs) in plasma at physiological levels. The method has been successfully applied to the NEFAs profiling of plasma samples from healthy adult volunteers and subjects affected by diabetes mellitus. Compared with published protocols based on gas chromatography–mass spectrometry and liquid chromatography coupled to electrospray ionization mass spectrometry, this method does not require derivatization and does not show matrix effects, thus simplifying sample preparation procedure and reducing the total time of analysis to approximately 90 min. In addition, Direct-EI-MS allows the acquisition of high-quality NIST library-matchable EI spectra, allowing an easy-to-obtain identification of the target NEFAs.     

Unexpected Acetylation of Endogenous Aliphatic Amines by Arylamine N‐Acetyltransferase NAT2

N‐Acetyltransferases play critical roles in the deactivation and clearance of xenobiotics, including clinical drugs. NAT2 has been classified as an arylamine N‐acetyltransferase that mainly converts aromatic amines, hydroxylamines, and hydrazines. Herein, we demonstrate that the human arylamine N‐acetyltransferase NAT2 also acetylates aliphatic endogenous amines. Metabolomic analysis and chemical synthesis revealed increased intracellular concentrations of mono‐ and diacetylated spermidine in human cell lines expressing the rapid compared to the slow acetylator NAT2 phenotype. The regioselective N⁸‐acetylation of monoacetylated spermidine by NAT2 answers the long‐standing question of the source of diacetylspermidine. We also identified selective acetylation of structurally diverse alkylamine‐containing drugs by NAT2, which may contribute to variations in patient responses. The results demonstrate a previously unknown functionality and potential regulatory role for NAT2, and we suggest that this enzyme should be considered for re‐classification.     

Development and in-house validation of a robust and sensitive solid-phase extraction liquid chromatography/tandem mass spectrometry method for the quantitative determination of aflatoxins B1, B2, G1, G2, ochratoxin A, deoxynivalenol, zearalenone, T-2 and HT-2 toxins in cereal-based foods

A sensitive and robust liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed for the simultaneous determination of aflatoxins (B(1), B(2), G(1), G(2)), ochratoxin A, deoxynivalenol, zearalenone, T-2 and HT-2 toxins in cereal-based foods. Samples were extracted with a mixture of acetonitrile/water (84:16, v/v) and cleaned up through a polymeric solid-phase extraction column. Detection and quantification of the nine mycotoxins were performed by reversed-phase liquid chromatography coupled with electrospray ionization triple quadrupole mass spectrometry (LC/ESI-MS/MS), using fully (13)C-isotope-labelled mycotoxins as internal standards. The method was validated in-house for five different cereal processed products, namely barley, oat and durum wheat flours, rye- and wheat-based crisp bread. Recoveries and repeatability of the whole analytical procedure were evaluated at contamination levels encompassing the EU maximum permitted levels for each tested mycotoxin. Recoveries ranged from 89 to 108% for deoxynivalenol, from 73 to 114% for aflatoxins, from 85 to 114% for T-2 and HT-2 toxins, from 64 to 97% for zearalenone, from 74 to 102% for ochratoxin A. Relative standard deviations were less than 16% for all tested mycotoxins and matrices. Limits of detection (signal-to-noise ratio 3:1) ranged from 0.1 to 59.2 μg/kg. The trueness of the results obtained by the proposed method was demonstrated by analysis of reference materials for aflatoxins, deoxynivalenol, zearalenone. The use of inexpensive clean-up cartridges and the increasing availability of less expensive LC/MS/MS instrumentation strengthen the potential of the proposed method for its effective application for reliable routine analysis to assess compliance of tested cereal products with current regulation.     

Frequency effects on the surface coverage of nitrophenyl films ultrasonically grafted onto indium tin oxide

The covalent attachment of various organic molecules on conductive supports including indium tin oxide (ITO) using diazonium chemistry has been known for many years. A commonly used method to achieve this is the electrochemical reduction of diazonium compounds leading to radicals, followed by binding of the radicals to the support. In the present report, an alternative method using ultrasound at different frequencies (20, 582, 863, and 1142 kHz) to induce the surface grafting of nitrobenzene diazonium onto an ITO surface is described. It is shown that the grafting on ITO is more efficient in the lower ultrasonic frequency range that is ascribed to changes in the balance between the physical and chemical effects of cavitation with frequency. Both the physical and chemical effects of cavitation play important roles at all frequencies, but at high ultrasound frequencies, the physical effects are relatively small. At 20 kHz, the physical component, including mass transport, is larger than at higher frequencies, and mechanisms based on these observations have been proposed. Ultrasonic grafting has an advantage over electrografting in that it may provide more control over surface coverage, thus it is suggested that the ultrasonic method is used where the surface concentration of the organic layer must be controlled.     

Polymeric ruthenium bipyridine complexes: New potential materials for polymer solar cells

Methyl methacrylate‐containing bipyridine monomers were synthesized with a hydoxy‐functionalized bipyridine. The 4′‐methyl group of the 2,2′‐bipyridine was used to introduce hydoxy‐functionalized alkyl spacers of two different lengths. Two, different synthetic routes were applied for the preparation of the hydoxy‐functionalized bipyridine via a bromo‐(C₇ spacer) or a silylated‐(C₃ spacer) intermediate. A copolymer of poly(methyl methacrylate) with bipyridine units in the side chains was prepared by free‐radical copolymerization and characterized with ¹H NMR, ultraviolet–visible, and IR spectroscopy as well as gel permeation chromatography. The bipyridine units of the copolymer were reacted with ruthenium bipyridine precursors. The resulting graft copolymers displayed promising photophysical and electrochemical properties, opening interesting perspectives for applications in the field of solar‐cell devices. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 374–385, 2004