Emulsion polymerization of styrene. III. Effect of Ti(III) and Cl(1) on the polymerization of styrene initiated by potassium persulfate

The emulsion polymerization of styrene initiated by potassium persulfate catalyzed by Ti⁺³ ions was studied. Two sources of Ti⁺³ ions were used: the titanium trichloride and titanium sulfate. It was found that the titanium ions used in conjunction with potassium persulfate decrease both the reaction rate and the average molecular weight. An even greater drop of reaction rate was noted when chlorine anions (TiCl₃) were present. The presence of these ions had a stabilizing effect on the polydispersity.     

New Bio-Based Furanic Materials Effectively Absorb Metals from Water and Exert Antimicrobial Activity

Development of sustainable bio-based materials for removal of toxic contaminants from water is a high priority goal. Novel bio-based binary and ternary copolymers with enhanced ion-exchange, adsorption and antibacterial properties were obtained by using plant biomass-derived diallyl esters of furandicarboxylic acid (FDCA) as crosslinking agents and easily available vinyl monomers. The synthesized copolymer materials showed higher sorption capacities for Ni^II, Co^II and Cu^II compared to the commercial ion-exchange resins, and they maintained their high metal adsorption capacities for over 10 cycles of regeneration. The synthesized copolymer gels containing 1–5 wt % of the crosslinker showed excellent water absorption capacities. The synthesized copolymers with 1 % crosslinker content showed swelling ratios high enough to also act as moisture absorbents. Synthesized copolymers with crosslinker content of 10 wt % performed as contact-active antibacterials by inhibiting the growth of Gram-positive (S. aureus) and Gram-negative bacteria (E. coli, K. pneumonia) in suspension tests.     

Effect of flame-sprayed Al–12Si coatings on the failure behaviour of pressurized fibre-reinforced composite tubes

Internal pressurization testing at room temperature was performed to evaluate the effect of flame-spraying aluminum-12silicon on the leakage behavior of fibre-reinforced composite tubes fabricated by filament winding, and covered with garnet sand. A group of specimens were completely coated with flame-sprayed metal particles and another set remained uncoated. t-tests were conducted at a significance level of α = 0.05 to analyze the effect of the coating on the leakage behavior of the specimens. Ultraviolet imaging was used to illustrate a characteristic leakage pattern of the composite tubes. Coated specimens exhibited slightly higher mean leakage and burst pressures than the uncoated specimens. The t-test results provided strong statistical evidence that the flame spraying process employed did not damage the filament wound tubes covered with garnet sand.     

Metal Oxide Assisted Preparation of Core–Shell Beads with Dense Metal–Organic Framework Coatings for the Enhanced Extraction of Organic Pollutants

Dense and homogeneous metal–organic framework (MOF) coatings on functional bead surfaces are easily prepared by using intermediate sacrificial metal oxide coatings containing the metal precursor of the MOF. Polystyrene (PS) beads are coated with a ZnO layer to give ZnO@PS core–shell beads. The ZnO@PS beads are reactive in the presence of 2‐methylimidazole to transform part of the ZnO coating into a porous zeolitic imidazolate framework‐8 (ZIF‐8) external shell positioned above the internal ZnO precursor shell. The obtained ZIF‐8@ZnO@PS beads can be easily packed in column format for flow‐through applications, such as the solid‐phase extraction of trace priority‐listed environmental pollutants. The prepared material shows an excellent permeance to flow when packed as a column to give high enrichment factors, facile regeneration, and excellent reusability for the extraction of the pollutant bisphenol A. It also shows an outstanding performance for the simultaneous enrichment of mixtures of endocrine disrupting chemicals (bisphenol A, 4‐tert‐octylphenol and 4‐n‐nonylphenol), facilitating their analysis when present at very low levels (<1 μg L^?1) in drinking waters. For the extraction of the pollutant bisphenol A, the prepared ZIF‐8@ZnO@PS beads also show a superior extraction and preconcentration capacity to that of the PS beads used as precursors and the composite materials obtained by the direct growth of ZIF‐8 on the surface of the PS beads in the absence of metal oxide intermediate coatings.     

Solvato Modulation of the Magnetic Memory in Isotopically Enriched Erbium Polyoxometalate

Single-Molecule Magnet (SMM) property is by essence molecular, while commonly measured in solid crystalline state. Solvent crystallization molecules are usually neglected in the analysis and interpretation of solid-state properties. The solvation/desolvation process in the polyoxometalate(POM)-based Na₉[Er(W₅O₁₈)₂] ⋅ 35 H₂O SMM demonstrates that the dehydrated form relaxes more than 1000 times faster than the initial state, while the rehydration process allows the quasi complete recovering of the initial magnetic behaviour. This dehydration process is monitored by thermogravimetric analysis (TGA) and temperature-dependent X-ray powder diffraction, and rationalized by periodic quantum chemical calculations evidencing the tremendous role of the labile water molecules in the stability of the edifice. Ab-initio calculations highlight that sodium ions localization in the structure drive the magnetic responses. Isotopic enrichment with nuclear spin free (¹⁶⁶Er, I=0) Er^III ions shows that the relaxation dynamics in the quantum regime depends on the nuclear spin.     

Engineering Multifunctional Gold Decorated Dendritic Mesoporous Silica/Tantalum Oxide Nanoparticles for Intraperitoneal Tumor‐Specific Delivery

Nonspecific high‐energy radiation for treatment of metastatic ovarian cancer is limited by damage to healthy organs, which can be mitigated by the use of radiosensitizers and image‐guided radiotherapy. Gold (Au) and tantalum oxide (TaO_x) nanoparticles (NPs), by virtue of their high atomic numbers, find utility in the design of bimetallic NP systems capable of high‐contrast computed tomography (CT) imaging as well as a potential radiosensitizing effect. These two radio‐dense metals are integrated into dendritic mesoporous silica NPs (dMSNs) with radial porous channels for high surface‐area loading of therapeutic agents. This approach results in stable, monodispersed dMSNs with a uniform distribution of Au on the surface and TaO_x in the core that exhibits CT attenuation up to seven times greater than iodine or monometallic dMSNs without either TaO_x or Au. Tumor targeting is assessed in a metastatic ovarian cancer mouse model. Ex vivo micro‐CT imaging of collected tumors shows that these NPs not only accumulate at tumor sites but also penetrate inside tumor tissues. This study demonstrates that after intraperitoneal administration, rationally designed bimetallic NPs can simultaneously serve as targeted contrast agents for imaging tumors and to enhance radiation therapy in metastatic ovarian cancer.     

Crystal structures of two isostructural compounds: a second polymorph of dipotassium hydrogen citrate,K2HC6H5O7, and potassium rubidium hydrogen citrate,KRbHC6H5O7

The crystal structures of a new polymorph of dipotassium hydrogen citrate, 2K⁺·HC₆H₅O₇^2?, and potassium rubidium hydrogen citrate, K⁺·Rb⁺·HC₆H₅O₇^2?, have been solved and refined using laboratory powder X‐ray diffraction and optimized using density functional techniques. In the new polymorph of the dipotassium salt, KO₇ and KO₈ coordination polyhedra share corners and edges to form a three‐dimensional framework with channels parallel to the a axis and [111]. The hydrophobic methylene groups face each other in the channels. The un‐ionized carboxylic acid group forms a strong charge‐assisted hydrogen bond to the central ionized carboxylate group. The hydroxy group forms an intermolecular hydrogen bond to a different central carboxylate group. In the potassium rubidium salt, the K⁺ and Rb⁺ cations are disordered over two sites, in approximately 0.72:0.28 and 0.28:0.72 ratios. KO₈ and RbO₉ coordination polyhedra share corners and edges to form a three‐dimensional framework with channels parallel to the a axis. The un‐ionized carboxylic acid group forms a strong charge‐assisted hydrogen bond to an ionized carboxylate group. The hydroxy group forms an intermolecular hydrogen bond to the central carboxylate group. Density functional theory (DFT) calculations on the ordered cation structures suggest that interchange of K⁺ and Rb⁺ at the two cation sites changes the energy insignificantly.