Gas-phase reactions of organic radicals and diradicals with ions

Reactions of polyatomic organic radicals with gas phase ions have been studied at thermal energy using a flowing afterglow-selected ion flow tube (FA-SIFT) instrument. A supersonic pyrolysis nozzle produces allyl radical (CH2CHCH2) and ortho-benzyne diradical (o-C6H4) for reaction with ions. We have observed: [CH2CHCH2 + H3O+ --> C3H6+ + H2O], [CH2CHCH2 + HO- --> no ion products], [o-C6H4 + H3O+ --> C6H5+ + H2O], and [o-C6H4 + HO- --> C6H3- + H2O]. The proton transfer reactions with H3O+ occur at nearly every collision (kII approximately with 10(-9) cm3 s(-1)). The exothermic proton abstraction for o-C6H4 + HO- is unexpectedly slow (kII approximately with 10(-10) cm3 s(-1)). This has been rationalized by competing associative detachment: o-C6H4 + HO- --> C6H5O + e-. The allyl + HO- reaction proceeds presumably via similar detachment pathways.     

Flow injection determination of cobalt after its sorption onto polyurethane foam loaded with 2-(2-thiazolylazo)-p-cresol (TAC)

An electrochemically stable monolayer of tris(2,2'-bipyridyl)ruthenium(II) was obtained for the first time. It was based on the electrostatic attachment of Ru(bpy)(3)(2+) to the benzene sulfonic acid monolayer film, which was covalently bound onto glassy carbon electrode by the electrochemical reduction of diazobenzene sulfonic acid. The surface-confined Ru(bpy)(3)(2+) underwent reversible surface process, and reacted with the coreactant, tripropylamine, to produce electrochemiluminescence. In view of the stability of the electrode, the results strongly suggested that light was emitted from the surface-confined Ru(bpy)(3)(2+), not from the detached Ru(bpy)(3)(2+). The Ru(bpy)(3)(2+) modified electrode was used to the determination of tripropylamine. It showed good linearity in the concentration range from 5 muM to 1 mM with a detection limit of 1 muM (S/N=4). The good stability of the Ru(bpy)(3)(2+) modified electrode also showed that the benzene sulfonic acid monolayer film prepared can be served as an excellent support to construct multilayers.     

2-Mercaptomethyl-thiazolidines use conserved aromatic–S interactions to achieve broad-range inhibition of metallo-β-lactamases

Infections caused by multidrug resistant (MDR) bacteria are a major public health threat. Carbapenems are among the most potent antimicrobial agents that are commercially available to treat MDR bacteria. Bacterial production of carbapenem-hydrolysing metallo-β-lactamases (MBLs) challenges their safety and efficacy, with subclass B1 MBLs hydrolysing almost all β-lactam antibiotics. MBL inhibitors would fulfil an urgent clinical need by prolonging the lifetime of these life-saving drugs. Here we report the synthesis and activity of a series of 2-mercaptomethyl-thiazolidines (MMTZs), designed to replicate MBL interactions with reaction intermediates or hydrolysis products. MMTZs are potent competitive inhibitors of B1 MBLs in vitro (e.g., K_i = 0.44 μM vs. NDM-1). Crystal structures of MMTZ complexes reveal similar binding patterns to the most clinically important B1 MBLs (NDM-1, VIM-2 and IMP-1), contrasting with previously studied thiol-based MBL inhibitors, such as bisthiazolidines (BTZs) or captopril stereoisomers, which exhibit lower, more variable potencies and multiple binding modes. MMTZ binding involves thiol coordination to the Zn(ii) site and extensive hydrophobic interactions, burying the inhibitor more deeply within the active site than d/l-captopril. Unexpectedly, MMTZ binding features a thioether–π interaction with a conserved active-site aromatic residue, consistent with their equipotent inhibition and similar binding to multiple MBLs. MMTZs penetrate multiple Enterobacterales, inhibit NDM-1 in situ, and restore carbapenem potency against clinical isolates expressing B1 MBLs. Based on their inhibitory profile and lack of eukaryotic cell toxicity, MMTZs represent a promising scaffold for MBL inhibitor development. These results also suggest sulphur–π interactions can be exploited for general ligand design in medicinal chemistry.

Metallo-β-lactamases (MBLs) are major culprits of resistance to carbapenems in bacteria. A series of thiazolidines are potent MBL inhibitors, restoring the activity of carbapenems. Metal binding and sulphur–π interactions are key to inhibition.     

New Bio-Based Furanic Materials Effectively Absorb Metals from Water and Exert Antimicrobial Activity

Development of sustainable bio-based materials for removal of toxic contaminants from water is a high priority goal. Novel bio-based binary and ternary copolymers with enhanced ion-exchange, adsorption and antibacterial properties were obtained by using plant biomass-derived diallyl esters of furandicarboxylic acid (FDCA) as crosslinking agents and easily available vinyl monomers. The synthesized copolymer materials showed higher sorption capacities for Ni^II, Co^II and Cu^II compared to the commercial ion-exchange resins, and they maintained their high metal adsorption capacities for over 10 cycles of regeneration. The synthesized copolymer gels containing 1–5 wt % of the crosslinker showed excellent water absorption capacities. The synthesized copolymers with 1 % crosslinker content showed swelling ratios high enough to also act as moisture absorbents. Synthesized copolymers with crosslinker content of 10 wt % performed as contact-active antibacterials by inhibiting the growth of Gram-positive (S. aureus) and Gram-negative bacteria (E. coli, K. pneumonia) in suspension tests.     

Metal Oxide Assisted Preparation of Core–Shell Beads with Dense Metal–Organic Framework Coatings for the Enhanced Extraction of Organic Pollutants

Dense and homogeneous metal–organic framework (MOF) coatings on functional bead surfaces are easily prepared by using intermediate sacrificial metal oxide coatings containing the metal precursor of the MOF. Polystyrene (PS) beads are coated with a ZnO layer to give ZnO@PS core–shell beads. The ZnO@PS beads are reactive in the presence of 2‐methylimidazole to transform part of the ZnO coating into a porous zeolitic imidazolate framework‐8 (ZIF‐8) external shell positioned above the internal ZnO precursor shell. The obtained ZIF‐8@ZnO@PS beads can be easily packed in column format for flow‐through applications, such as the solid‐phase extraction of trace priority‐listed environmental pollutants. The prepared material shows an excellent permeance to flow when packed as a column to give high enrichment factors, facile regeneration, and excellent reusability for the extraction of the pollutant bisphenol A. It also shows an outstanding performance for the simultaneous enrichment of mixtures of endocrine disrupting chemicals (bisphenol A, 4‐tert‐octylphenol and 4‐n‐nonylphenol), facilitating their analysis when present at very low levels (<1 μg L^?1) in drinking waters. For the extraction of the pollutant bisphenol A, the prepared ZIF‐8@ZnO@PS beads also show a superior extraction and preconcentration capacity to that of the PS beads used as precursors and the composite materials obtained by the direct growth of ZIF‐8 on the surface of the PS beads in the absence of metal oxide intermediate coatings.     

Mycotoxin profile of Fusarium langsethiae isolated from wheat in Italy: production of type‐A trichothecenes and relevant glucosyl derivatives

Fusarium langsethiae, formally described as a new species over a decade ago, has been identified as the main producer of HT‐2 (HT2) and T‐2 (T2) toxins in Europe in small cereal grains. Mycotoxin contamination caused by this Fusarium species can represent a food safety hazard that deserves further attention. In the present work, the mycotoxin profile in wheat cultures of F. langsethiae is presented with particular reference to the production of major type‐A trichothecenes and their glucosyl derivatives. F. langsethiae isolates, representative of the major Italian wheat cultivation areas, were tested for the production of T2, HT2, diacetoxyscirpenol (DAS) and neosolaniol (NEO), and relevant glucosyl derivatives. Liquid chromatography‐tandem mass spectrometry (LC‐MS/MS) was used for the identification and chemical characterization of these metabolites. F. langsethiae isolates under investigation resulted to be potent producers of T2, HT2 and NEO. Furthermore, a well‐defined set of isolates, all originating from Central Italy, produced also DAS. All isolates were found to be able to produce HT2 glucosyl derivatives, whereas only traces of T2 glucoside were detected in one sample. Furthermore, two mono‐glucosyl derivatives of NEO and one mono‐glucoside derivative of DAS were identified and characterized. The screening for the presence/absence of glucosylated trichothecenes in analyzed fungal extracts revealed a general co‐occurrence of these derivatives with the parent toxin at levels that could be roughly estimated to account up to 37% of the relevant unconjugated toxin. This is the first report of the production of glucosylated trichothecenes by F. langsethiae cultured on small grains. Copyright © 2013 John Wiley & Sons, Ltd.     

Experimental design for in-house validation of a screening immunoassay kit. The case of a multiplex dipstick for Fusarium mycotoxins in cereals

The benefits of using rapid qualitative methods to verify compliance of food and feed with legislation requirements include user-friendly format, the possibility of detection without expensive instrumentation, rapid response and affordable price. Prior to their use, however, the methods have to pass validation experiments, in order to assess their performance profile. An experimental protocol for in-house validation of a screening immunoassay has been designed and applied to evaluate performance characteristics of a multiplex dipstick kit for the determination of major Fusarium toxins, namely zearalenone, T-2 and HT-2 toxins, deoxynivalenol and fumonisins in wheat and maize. The test is intended for screening of cereals on the presence/absence of these mycotoxins at maximum permitted levels established by European legislation or target levels. The response of the measurement is determined with a reader device. Samples classified as negative are considered as compliant, whereas positive samples need to be re-analysed with confirmatory methods. The in-house validation design consisted of three steps, namely (1) estimating the precision of the method including "between day" effects and influences from different varieties of the matrices, (2) establishing robust cutoff values for the dipstick response at target mycotoxin levels assuming an acceptable rate of false negative results of 5 % and (3) assessment of the rate of false positive results of blank samples and samples containing the target analytes below the legal limits. The total precision expressed as relative standard deviation and determined individually for each analyte/concentration/matrix combination varied from 9 to 30 % and was considered as acceptable. In 17 out of 28 cases, the repeatability standard deviation was the most important factor. The predominance of the repeatability compared to the other factors (matrix, days) was an indicator for the ruggedness of the assay. The validation study demonstrated that the test was able to differentiate blank samples from samples contaminated at target mycotoxin levels with a false positive rate lower than 6 %. Considering realistic mycotoxin occurrence in European samples, significant economical benefits can be expected when using the test under real-world conditions.

Neuronal metabolomics by ion mobility mass spectrometry: cocaine effects on glucose and selected biogenic amine metabolites in the frontal cortex, striatum, and thalamus of the rat

We report results of studies of global and targeted neuronal metabolomes by ambient pressure ion mobility mass spectrometry. The rat frontal cortex, striatum, and thalamus were sampled from control nontreated rats and those treated with acute cocaine or pargyline. Quantitative evaluations were made by standard additions or isotopic dilution. The mass detection limit was ～100 pmol varying with the analyte. Targeted metabolites of dopamine, serotonin, and glucose followed the rank order of distribution expected between the anatomical areas. Data was evaluated by principal component analysis on 764 common metabolites (identified by m/z and reduced mobility). Differences between anatomical areas and treatment groups were observed for 53 % of these metabolites using principal component analysis. Global and targeted metabolic differences were observed between the three anatomical areas with contralateral differences between some areas. Following drug treatments, global and targeted metabolomes were found to shift relative to controls and still maintained anatomical differences. Pargyline reduced 3,4-dihydroxyphenylacetic acid below detection limits, and 5-HIAA varied between anatomical regions. Notable findings were: (1) global metabolomes were different between anatomical areas and were altered by acute cocaine providing a broad but targeted window of discovery for metabolic changes produced by drugs of abuse; (2) quantitative analysis was demonstrated using isotope dilution and standard addition; (3) cocaine changed glucose and biogenic amine metabolism in the anatomical areas tested; and (4) the largest effect of cocaine was on the glycolysis metabolome in the thalamus confirming inferences from previous positron emission tomography studies using 2-deoxyglucose.

Synthesis of bifunctional chelating agents based on mono and diphosphonic derivatives of diethylenetriaminepentaacetic acid

Bifunctional chelating agents (BFCAs) are small molecules containing a chelating unit, able to strongly coordinate a metal ion, and a reactive functional group, devised to form a stable covalent bond with another molecule. BFCAs are widely employed since their conjugation to a suitable biomolecule (e.g., a peptide or an antibody) allows the synthesis of diagnostic or therapeutic agents that specifically target diseased tissue with metals or radiometals. For this reason, BFCAs find application in diagnostic imaging, molecular imaging, and radiotherapy of cancer. The synthesis of new BFCAs based on a diethylenetriaminepentaacetic acid (DTPA) structure in which one or two carboxylic groups are replaced with phosphonic units is described. The phosphonic group, aside from being a classical isostere of the carboxylic acid in coordination chemistry, allows to modulate the physico-chemical properties of the ligands and of the corresponding complexes.     

Smart Coatings Prepared via MAPLE Deposition of Polymer Nanocapsules for Light-Induced Release

Herein, smart coatings based on photo-responsive polymer nanocapsules (NC) and deposited by laser evaporation are presented. These systems combine remotely controllable release and high encapsulation efficiency of nanoparticles with the easy handling and safety of macroscopic substrates. In particular, azobenzene-based NC loaded with active molecules (thyme oil and coumarin 6) were deposited through Matrix-Assisted Pulsed Laser Evaporation (MAPLE) on flat inorganic (KBr) and organic (polyethylene, PE) and 3D (acrylate-based micro-needle array) substrates. SEM analyses highlighted the versatility and performance of MAPLE in the fabrication of the designed smart coatings. DLS analyses, performed on both MAPLE- and drop casting-deposited NC, demonstrated the remarkable adhesion achieved with MAPLE. Finally, thyme oil and coumarin 6 release experiments further demonstrated that MAPLE is a promising technique for the realization of photo-responsive coatings on various substrates.