New Types of Phosphocavitandes

Abstract

New types of phosphocavitandes differing in structure of phosphorus surroundings were synthesized and investigated.     

Development of a syn‐Selective Mannich Reaction of Aldehydes with Propargylic Imines by Dual Catalysis: Asymmetric Synthesis of Functionalized Propargylic Amines

Direct coupling of enolizable aldehydes with C‐alkynyl imines is realized affording the corresponding propargylic Mannich adducts of syn configuration, thus complementing previous methods that gave access to the anti‐isomers. The combination of proline and a urea Brønsted base cocatalyst is key for the reactions to proceed under very mild conditions (3–10 mol % catalyst loading, dichloromethane as solvent, ?20 °C, 1.2 molar equivalents of aldehyde) and with virtually total stereocontrol (syn/anti ratio up to 99:1; ee up to 99 %). Some possibilities of further chemical elaboration of adducts are also briefly illustrated.     

Microengineered PEG Hydrogels: 3D Scaffolds for Guided Cell Growth

Designing three‐dimensional (3D) scaffolds for selective manipulation of cell growth is of high relevance for applications in regenerative medicine. Especially, scaffolds with oriented morphologies bear high potential to guide the restoration of specific tissues. The fabrication of hydrogel scaffolds that support long‐term survival, proliferation, and unidirectional growth of embedded cells is presented here. Parallel channel structures are introduced into the bulk hydrogels by uniaxial freezing, providing stable, and uniform porosity suitable for cell invasion (pore diameters of 5–15 µm). In vitro assessment of the scaffolds with murine fibroblasts (NIH L929) shows a remarkable unidirectional movement along the channels, with the cells traveling several millimeters through the hydrogel.

     

Optimisation of analytical procedures for the quantification of ionic and carbonaceous fractions in the atmospheric aerosol and applications to ambient samples

In the last decade, our research group set up and optimised analytical techniques for the characterisation of the major components of atmospheric aerosol (i.e. secondary inorganic ions and carbonaceous material) and source markers (e.g. levoglucosan, carbonates). In this study, we present a complete overview on the most problematic aspects that can be encountered during the quantification of the two main components of aerosol, i.e. the ionic and carbonaceous fractions. More in detail, different liquid chromatographic approaches were set up for main ions and anhydrosugars determination. Quality assurance procedures (i.e. tests on data reliability) were applied during the set-up phase and they are presented in this work. As regards the carbonaceous component characterisation, two evolved gas analysis techniques were set up and applied: the thermogravimetric technique coupled to the Fourier transformed infrared spectroscopy (TGA/FTIR) and the thermal–optical transmittance method (TOT). A suitable protocol for organic and elemental carbon separation was set up for the TGA/FTIR system and a comparison with the results obtained by the TOT method was carried out. Studies on the impact of filter load, field blanks, and sample composition on OC/EC quantification by the TOT method were performed. Moreover, approaches for carbonate carbon quantification on different kinds of filters were developed. It was demonstrated that this approach allows to reach the ionic balance in samples impacted by carbonate compounds. The optimised methods have been applied for the analysis of thousands of PM filters allowing the obtainment of reliable results.     

On the interaction of two different types of ligands binding to the same molecule part I: basics and the transfer of the decoupled sites representation to systems with n and one binding sites

The decoupled sites representation (DSR) for one type of ligand allows to regard complex overall titration curves as sum of classical Henderson-Hasselbalch (HH) titration curves. In this work we transfer this theoretical approach to molecules with different types of interacting ligands (e.g. protons and electrons), prove the existence of decoupled systems for n ₁ and one binding sites for two different ligands, and point out some difficulties and limits of this transfer. A major difference to the DSR for one type of ligand is the loss of uniqueness of the decoupled system. However, all decoupled systems share a unique set of microstate probabilities and each decoupled system corresponds to a certain permutation of these microstate probabilities. Moreover, we show that the titration curve of a certain binding site in the original system can be regarded as linear combination of the titration curves of the individual sites of the decoupled system if the weights of the linear combination are substituted by functions in the activity of the second ligand. In the underlying model with only pairwise interaction, an important observation of our theoretical investigation is the following: Even though the binding sites of ligand L ₁ may not interact directly, they can show secondary interaction due to the interaction with the second type of ligand. This means, if the activity of the second ligand is fixed and we regard the 1-dimensional titration curve of an individual binding site for ligand L ₁ depending on its activity, we may observe a strong deviation from the classical HH shape in spite of non-interacting sites for ligand L ₁.     

Amoxicillin removal from aqueous matrices by sorption with almond shell ashes

The adsorption of the antibiotic amoxicillin at low concentration levels (µg?L^?1 order) from aqueous solution on almond shell ashes has been investigated, either by kinetic or equilibrium assays. The effect of the adsorbent amount, initial concentration of the antibiotic, particle diameter (d_p) and temperature were considered to evaluate the adsorption capacity of the adsorbent. The results showed that amoxicillin sorption is dependent on these four factors. The adsorption process was relatively fast and equilibrium was established in about 12 hours. The optimum parameters for an initial concentration of 450?µg?L^?1 were 50?mg of adsorbent, 303?K and d_p?<?600?µm. A comparison of kinetic models showed that pseudo-second order kinetics provides the best correlation of the experimental data. Isotherm data adjusted better to Langmuir equation, with an adsorption capacity of 2.5?±?0.1?mg?g^?1 at 303?K. The desorption process was also evaluated (maximum efficiency of 5%). Thermodynamic parameters were calculated and the negative value of ΔH⁰ and ΔG⁰ showed that adsorption was exothermic and a spontaneous process.     

Response surface optimisation applied to a headspace-solid phase microextraction-gas chromatography-mass spectrometry method for the analysis of volatile organic compounds in water matrices

A new method for the simultaneous determination of 12 volatile organic compounds (trans-1,2-dichloroethene, 1,1,1-trichloroethane, benzene, 1,2-dichloroethane, trichloroethene, toluene, 1,1,2-trichloroethane, tetrachloroethene, ethylbenzene, m-, p-, o-xylene) in water samples by headspace solid phase microextraction (HS–SPME)–gas chromatography mass spectrometry (GC–MS) was described, using a 100?µm PDMS (polydimethylsiloxane) coated fibre. The response surface methodology was used to optimise the effect of the extraction time and temperature, as well as the influence of the salt addition in the extraction process. Optimal conditions were extraction time and temperature of 30?min and ?20°C, respectively, and NaCl concentration of 4?mol?L^?1. The detection limits were in the range of 1.1?×?10^?3–2.3?µg?L^?1 for the 12 volatile organic compounds (VOCs). Global uncertainties were in the range of 4–68%, when concentrations decrease from 250?µg?L^?1 down to the limits of quantification. The method proved adequate to detect VOCs in six river samples.     

New synthetic methods for 2,3-diarylacridin-9(10H)-one and (E)-2-aryl-4-styrylfuro[3,2-c]quinoline derivatives

Two new synthetic methodologies for 2,3-diarylacridin-9(10H)-ones were developed. The first one involves the Heck reaction of (E)-3-iodo-2-styrylquinolin-4(1H)-ones with styrenes, leading to (E,E)-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize in two different ways. Electrocyclization and further in situ oxidation leads to 2,3-diarylacridin-9(10H)-ones, while tautomerization, cyclization by nucleophilic addition and further in situ oxidation produces (E)-2-aryl-4-styrylfuro[3,2-c]quinolines as the main compound. The second method gives only 2,3-diaryl-10-methylacridin-9(10H)-ones and involves the Heck reaction of (E)-3-iodo-1-methyl-2-styrylquinolin-4(1H)-ones and styrenes, leading to (E,E)-1-methyl-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize through electrocyclization and oxidation processes affording the expected compounds. The structures of all new compounds were established by extensive NMR studies.     

Total Diet Study: Mg and Mn content estimation of a Market Basket of São Paulo state (Brazil) by Instrumental Neutron Activation

Total Diet Studies (TDS) have been carried out to estimate dietary intakes of the essential and toxic elements for a large-scale population over a specific period of time. In this study, the TDS was based on the evaluation of food representing a Market Basket (MB), which reflected the dietary habits of the São Paulo State population, corresponding to 72 % of the average food consumption for the state of São Paulo. In the present Total Diet Study, magnesium and manganese concentrations were determined in 30 of the most consumed food groups of a MB of São Paulo State, Brazil. Instrumental Neutron Activation Analysis (INAA) has been successfully used on a regularly basis in several areas of nutrition and foodstuffs. Element concentrations were determined by INAA in freeze-dried samples and ranged in mg kg^?1. Mg 41.4 (fats)–5287 (coffee) and Mn 0.12 (prime grade beef)–32.9 (coffee). The average daily Mg and Mn intake was calculated by multiplying the concentration of each element in each table-ready food group by the respective weight (g day^?1) of the food group in the MB and adding the products from all food groups. The results of daily dietary intakes in this study were: Mg 174.8 and Mn 1.34 mg day^?1. Theses values were lower than the adequate intake (AI) proposed by the Food and Nutrition Board of the Institute of Medicine (USA National Academy) for adults. The low levels of Mg and Mn intakes presented in this TDS are probably due to the fact that MB of this study represented only 72 % of the weight of the most consumed household foods of São Paulo State.