Total synthesis of a conformationally constrained didemnin B analog

The total synthesis of a didemnin B analogue containing a conformationally constrained replacement for the isostatine moiety is reported. Synthetic highlights include an improved preparation of 2-hydroxy-3-cyclohexenecarboxylic acid and a new strategy for accessing the macrocycle.     

The first total synthesis of (-)-tamandarin A

[formula: see text] Tamandarin A (1), a newly isolated natural product similar in structure to didemnin B (2), was shown to be somewhat more active in vitro than 2 against pancreatic carcinoma with an ED50 value 1.5 to 2 ng/mL. We report here the first total synthesis of 1. The key steps include a practical stereoselective synthesis of the Hiv-isostatine unit, high-yielding linear precursor formation, a successful macrocyclization, and coupling of the macrocycle with the side chain to afford tamandarin A (1).     

Determination of the micelle-solute association constants of some benzene and naphthalene derivatives by micellar high performance liquid chromatograph

Summary The interaction of some benzene and naphthalene derivatives with sodium dodecyl sulphate, hexadecyltrimethylmmonium bromide and polyoxyethylene [23] dodecanol micelles has been evaluated by high operformance liquid chromatography using micellar mobile phases. The micelle-solute association constants have been obtained for the compounds investigated. Good correlation between free energy of transfer for water-micelles and for octanol-water has been observed.     

Unexpected differences in the alpha-halogenation and related reactivity of sulfones with perhaloalkanes in KOH-t-BuOH

Most alkyl phenyl sulfones are readily alpha-chlorinated with CCl(4) and alpha-brominated with CBrCl3 in KOH-t-BuOH via radical-anion radical pair (RARP) reactions. While isopropyl mesityl sulfone (4) is easily alpha-chlorinated with CCl(4), it was completely recovered when treated with the more reactive CBrCl3. Subsequent investigations showed the latter result to be due to the poor acidity of 4 together with the rapid depletion of CBrCl3 and KOH by their reaction with each other, and led to a variety of other important results. 4-Hydroxyphenyl isopropyl sulfone (6) is unreactive with either CCl4 or CBrCl3 in KOH-t-BuOH, its phenoxide anion strongly reducing the electronegativity of the sulfonyl group, thereby inhibiting alpha-anion formation. This effect is reversed by the electron-withdrawing influence of two alpha-phenyls, so that benzhydryl 4-hydroxyphenyl sulfone (8) is readily alpha-halogenated in KOH-t-BuOH with CCl4 or CBrCl3. On further contact with KOH-t-BuOH the alpha-halogenated sulfones from 8 are decomposed into benzophenone and phenol. While the alpha-halogenated derivatives of 4-methoxyphenyl benzhydryl sulfone (9) are stable to base, they are decomposed even under mildly acidic conditions into 4-methoxyphenyl 4-methoxybenzenethiolsulfonate (9c), phenol, and benzophenone. Mono-alpha-halogenation of benzyl phenyl sulfone (10) enhances the rate of the subsequent halogenation, so that alpha,alpha-dihalogenation is attained while much substrate is still present and the mono-alpha-halogenated product is not detected. The ease of reductive debromination of alpha-bromo sulfones with Cl3C- was correlated with the stability of the formed alpha-anions, explaining the success with alpha-bromobenzylic sulfones but failure with alpha-bromoalkyl sulfones. In the presence of air and the absence of competing halogenation, formation of the alpha-anions of alkyl aryl sulfones is quickly accompanied by oxidative cleavage by atmospheric O2, leading to the formation of arenesulfonyl alcohols, arenesulfonyl halides, and haloarenes.     

Spectroscopic Studies on the Interaction of Tetramethylpyridylporphyrins and Cationic Clays

In the present work, the interaction between5,10,15,20-tetrakis(1-methyl-4-pyridyl)-21H,23H-porphine (TMPyP) and its metallated form(CoTMPyP) with three cationic clays was investigatedby X-ray diffraction (XRD), UV-VIS and resonance Ramanspectroscopies. Sodium montmorillonites K10 and KSFand a synthetic fluorohectorite (FHT) containingdifferent macrocycle loadings, were prepared by an ionexchange reaction. In nonsaturated KSF and FHT, theCoTMPyP molecule assumes a flat orientation, relativeto the host layers, giving rise to at least twoabsorption bands in the Soret region (ca. 445 and 465 nm)assigned to adsorbed and intercalated CoTMPyP,respectively. For the delaminated K10 sample, a broadband centered around 456 nm, indicates a majorcontribution from the metalloporphyrin on the clayexternal surfaces. The electronic spectra of FHTsamples containing increasing amounts of CoTMPyPshow bands red shifted even when a small amount ofporphyrin is used, suggesting that the electroniclevels of the macrocycle are more affected by theinteraction with the clay than by the metalloporphyrindistortion inside the galleries. The resonance Ramanspectra obtained for all CoTMPyP samples presentedonly minor shifts in peak positions and band width,with the exception of the FHT saturated sample, wherethe bands are clearly broader when compared to otherloadings, suggesting that porphyrin aggregation isoccurring. In the case of TMPyP, the bands at ca. 430and 468 nm were assigned to nonprotonated andprotonated molecules, respectively. This assignment issupported by resonance Raman spectroscopy, which alsoshowed the ₂ mode (ca. 1550 cm^-1) to bethe most sensitive peak to protonation.     

An Efficient Route to Phenylselenoethers in the Presence of Ag2O

An efficient protocol for the preparation of phenylselenoethers from unsaturated alcohols using phenylselenenyl halides at room temperature was developed. The procedure employs phenylselenenyl chloride and bromide, some Δ ⁴- and Δ ⁵-alkenols and Ag₂O, as an additive, to generate the tetrahydropyrans or tetrahydrofurans. This method permits the preparation of cyclic phenylselenoethers in high yields and under extremely mild conditions.     

Isotachophoretic determination of stability constants of Ho and Y complexes with diethylenetriaminepentaacetic acid and 1,4,7,10-tetraazadodecane-N,N',N'',N'''-tetraacetic acid

The method of capillary isotachophoresis with conductivity detection was applied for the determination of the physico-chemical characteristics (conditional stability constants log beta') of holmium and yttrium complexes with DTPA (diethylenetriaminepentaacetic acid) and DOTA (1,4,7,10-tetraazadodecane-N,N',N',N'-tetraacetic acid). The log beta' determination is based on the linear relation between the stability constants of lanthanide-DTPA (lanthanide-DOTA) complexes and the reduction of the zone of the complex owing to the bleeding phenomena (liberating free metal ion). The stability constants calculated using this relationship are comparable with the literary data obtained by other methods for both holmium (log beta'(Ho-DTPA)=21.9, log beta'(Ho-DOTA)=24.5) and yttrium complexes (log beta'(Y-DTPA)=21.2, log beta'(Y-DOTA)=24.4). Capillary isotachophoresis was applied for the determination of the optimum composition of the reaction mixture (metal:ligand ratio) as well.     

Deep neural network analysis of nanoparticle ordering to identify defects in layered carbon materials

Smoothness/defectiveness of the carbon material surface is a key issue for many applications, spanning from electronics to reinforced materials, adsorbents and catalysis. Several surface defects cannot be observed with conventional analytic techniques, thus requiring the development of a new imaging approach. Here, we evaluate a convenient method for mapping such “hidden” defects on the surface of carbon materials using 1–5 nm metal nanoparticles as markers. A direct relationship between the presence of defects and the ordering of nanoparticles was studied experimentally and modeled using quantum chemistry calculations and Monte Carlo simulations. An automated pipeline for analyzing microscopic images is described: the degree of smoothness of experimental images was determined by a classification neural network, and then the images were searched for specific types of defects using a segmentation neural network. An informative set of features was generated from both networks: high-dimensional embeddings of image patches and statics of defect distribution.

Defectiveness of carbon material surface is a key issue for many applications. Pd-nanoparticle SEM imaging was used to highlight “hidden” defects and analyzed by neural networks to solve order/disorder classification and defect segmentation tasks.     

IAEA analytical quality assurance programmes to meet the present and future needs of developing countries

For many years the International Atomic Energy Agency (IAEA) has been promoting analytical quality assurance and quality control in its Member States with emphasis on measurands that are amenable to analysis by nuclear and related techniques, i.e. radionuclides, trace elements, and stable isotopes. This paper reviews briefly the rationale for some of these activities, particularly in relation to the needs of participants in developing countries arising out of co-ordinated research programmes, technical co-operation projects and global and regional networks. Emphasis is given to biological and environmental reference materials with a matrix of natural origin. Also described are some activities arising out of the requirements of ISO-25 and other relevant international quality standards.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.