Enantioselective Synthesis of Lepadins A–D from a Phenylglycinol‐Derived Hydroquinolone Lactam

The marine alkaloids (?)‐lepadins A–C and (+)‐lepadin D, belonging to two diastereoisomeric series, were synthesized from an (R)‐phenylglycinol‐derived tricyclic lactam via a common cis‐decahydroquinoline intermediate. Crucial aspects of the synthesis are the stereochemical control in the assembly of the cis‐decahydroquinoline platform, in the introduction of the C2 methyl and C3 hydroxy substituents, and in the generation of the C5 stereocenter.     

In situ analysis of soybeans and nuts by probe electrospray ionization mass spectrometry

The probe electrospray ionization (PESI) is an ESI‐based ionization technique that generates electrospray from the tip of a solid metal needle. In the present work, we describe the PESI mass spectra obtained by in situ measurement of soybeans and several nuts (peanuts, walnuts, cashew nuts, macadamia nuts and almonds) using different solid needles as sampling probes. It was found that PESI‐MS is a valuable approach for in situ lipid analysis of these seeds. The phospholipid and triacylglycerol PESI spectra of different nuts and soybean were compared by principal component analysis (PCA). PCA shows significant differences among the data of each family of seeds. Methanolic extracts of nuts and soybean were exposed to air and sunlight for several days. PESI mass spectra were recorded before and after the treatment. Along the aging of the oil (rancidification), the formation of oxidated species with variable number of hydroperoxide groups could be observed in the PESI spectra. The relative intensity of oxidated triacylglycerols signals increased with days of exposition. Monitoring sensitivity of PESI‐MS was high. This method provides a fast, simple and sensitive technique for the analysis (detection and characterization) of lipids in seed tissue and degree of oxidation of the oil samples. Copyright © 2015 John Wiley & Sons, Ltd.     

A Novel β-Glucosidase from Humicola insolens with High Potential for Untreated Waste Paper Conversion to Sugars

Humicola insolens produced a new β-glucosidase (BglHi2) under solid-state fermentation. The purified enzyme showed apparent molecular masses of 116 kDa (sodium dodecyl sulfate–polyacrylamide gel electrophoresis) and 404 kDa (gel-filtration), suggesting that it is a homotetramer. Mass spectrometry analysis showed amino acid sequence similarity with a β-glucosidase from Chaetomium thermophilum. Optima of pH and temperature were 5.0 and 65 °C, respectively, and the enzyme was stable for 60 min at 50 °C, maintaining 71 % residual activity after 60 min at 55 °C. BglHi2 hydrolyzed p-nitrophenyl-β-d-glucopyranoside and cellobiose. Cellobiose hydrolysis occurred with high apparent affinity (K _M?=?0.24?±?0.01 mmol L^?1) and catalytic efficiency (k _cat/K _M?=?1,304.92?±?53.32 L mmol^?1 s^?1). The activity was insensitive to Fe⁺³, Cr⁺², Mn⁺², Co⁺², and Ni²⁺, and 50–60 % residual activities were retained in the presence of Pb²⁺, Hg²⁺, and Cu²⁺. Mixtures of pure BglHi2 or H. insolens crude extract (CE) with crude extracts from Trichoderma reesei fully hydrolyzed Whatman no. 1 paper. Mixtures of H. insolens CE with T. reesei CE or Celluclast 1.5 L fully hydrolyzed untreated printed office paper, napkin, and magazine papers after 24–48 h, and untreated cardboard was hydrolyzed by a H. insolens CE/T. reesei CE mixture with 100 % glucose yield. Data revealed the good potential of BglHi2 for the hydrolysis of waste papers, promising feedstocks for cellulosic ethanol production.     

Synthesis and optical properties of BaTiO3:Eu3+@SiO2 glass ceramic nano particles

BaTiO₃:(5 %)Eu³⁺ nanoparticles and BaTiO₃:(5 %)Eu³⁺@SiO₂ composites were synthesized by the solvothermal method. The effects on the structure, morphology and luminescent properties were studied using samples with different molar ratios of BaTiO₃:(5 %)Eu³⁺@SiO₂: 60:40, 50:50, 40:60, 30:70, 20:80, 10:90, 08:92, 6.5:93.5, 05:95, and 1.5:98.5. When the amount of silica in the composites was increased, the orange emission of Eu³⁺ increased, too; this was observed by exciting the charge transfer band centered at 283 nm. Furthermore, an increase in the intensity of the emission was obtained under excitation at 394 nm as a consequence of the improvement in the crystallinity of the samples. The presence of silica and the degree of crystallinity of the samples were determined through the Fourier transform infrared spectra and X-ray diffraction patterns. All of the results suggest that our ceramic material could be a good candidate for biomedical applications such as biolabeling, since the luminescence of BaTiO₃:(5 %)Eu³⁺@SiO₂ composites have an emission intensity higher than that of nanoparticles composed solely of BaTiO₃:Eu³⁺. This work demonstrates that BaTiO₃:Eu³⁺@SiO₂ composites have an emission intensity higher than that of nanoparticles composed solely of BaTiO₃:Eu³⁺.     

Trace elements content in size-classified volcanic ashes as determined by inductively coupled plasma-mass spectrometry

At present there is an increasing concern as regards the release of potentially toxic metals into the environment. Volcanic eruptions are a natural source of metals and metalloids in the atmosphere. Toxic trace elements ejected during an eruptive episode may produce hazardous effects for people and the environment in areas close to the volcano. In this context, a study was undertaken to investigate the concentration of metal and metalloids in ashes ejected from Copahue volcano, Neuquén, Argentina. Two samples (A and B) of deposited particles were collected one day after the first eruption and size-fractionated in four sub-samples (S1, S2, S3 and S4). Analysis was performed by inductively coupled plasma-mass spectrometry (ICP-MS) and the accuracy for the entire analytical procedure was performed by means of the certified reference material CRM GBW 07105 Rocks (NRCCRM, China). The elements considered were: As, Cd, Cr, Cu, Hg, Ni, Pb, Sb, U, V and Zn. The adverse effect of potentially interfering species on the mass-spectrometric determination of these elements was also taken into account. The concentration intervals found in the four fractions are as follows (in μg g⁻¹): As, 6.0-2.6; Cd, 0.71-0.36; Cr, 29.5-54.0; Cu, 132-49.0; Hg, 0.020-0.007; Ni, 36.0-26.0; Pb, 15.5-2.55; Sb, 1.07-0.30; U, 2.57-1.94; V, 152-106; Zn, 85.5-55.0. The elements with the highest concentrations were: Cu, V and Zn. All fractions, in both samples, were found to be enriched in some toxic trace elements in the following order Sb>Cd>As. On the contrary, samples were depleted in Ni, Cr and Hg. Lead was the element that exhibits a noticeable difference in concentration between the finer and coarser fractions.     

The use of an electrophile carrier to determine the number of intermediates in the chlorination of 1-methylpyrrole

A kinetic and product study of the dichloroacetic acid catalyzed chlorination of 1-methylpyrrole with 3- and 4-substituted N-chlorobenzamides was carried out. Protonated N-chlorobenzamides served as carriers of CI⁺. A Hammett correlation was obtained with ρ=−0.68 (r=0.98, n=8). General acid catalysis was observed with α=0.48 (r=0.99 and n=7). The yields of 2-chlorination (84±0.7%) and 3-chlorination (2.6±0.4%) were essentially constant (constant intramolecular selectivity) as the substituent on the N-chlorobenzamide was varied. Observation of constant intramolecular selectivity indicated that two intermediates were formed during the acid catalyzed chlorination of 1-methylpyrrole with N-chlorobenzamides. The carrier method is applicable to all types of aromatic systems and limited only by the availability of suitable carrier molecules.     

Characterisation of nutraceutical compounds from different parts of particular species of Citrus sinensis ‘Ovale Calabrese’ by UHPLC-UV-ESI-HRMS

Consumers are aware of diet causing health problems and therefore there is an increased demand for natural ingredients that are expected to be safe and health-promoting. Many of these compounds belong to the class of flavonoids and can be divided into these five groups: flavanones, flavones, flavonols, flavanols, isoflavones and anthocyanidins. Extracts from citrus fruits are usually used as functional ingredients for several products. The aim of this paper was to develop an UHPLC-UV-ESI-HRMS method to define the metabolite profile of different parts of citrus fruit, of a particular cultivar called ‘Ovale Calabrese’, and in its main by-products. The high resolution mass spectrometry analysis allowed the identification of 27 compounds belonging to the classes of flavonoids and terpenoids. The high contents of phytochemical compounds, reveal the potential use of the ‘Ovale Calabrese’ as a rich source of nutraceutical compounds.     

Mechanical Properties and Failure Behavior of Physically Assembled Triblock Copolymer Gels with Varying Midblock Length

Mechanical properties including the failure behavior of physically assembled gels or physical gels are governed by their network structure. To investigate such behavior, we consider a physical gel system consisting of poly(styrene)‐poly(isoprene)‐poly(styrene)[PS‐PI‐PS] in mineral oil. In these gels, the endblock (PS) molecular weights are not significantly different, whereas, the midblock (PI) molecular weight has been varied such that we can access gels with and without midblock entanglement. Small angle X‐ray scattering data reveals that the gels are composed of collapsed PS aggregates connected by PI chains. The gelation temperature has been found to be a function of the endblock concentration. Tensile tests display stretch‐rate dependent modulus at high strain for the gels with midblock entanglement. Creep failure behavior has also been found to be influenced by the entanglement. Fracture experiments with predefined cracks show that the energy release rate scales linearly with the crack‐tip velocity for all gels considered here. In addition, increase of midblock chain length resulted in higher viscous dissipation leading to a higher energy release rate. The results provide an insight into how midblock entanglement can possibly affect the mechanical properties of physically assembled triblock copolymer gels in a midblock selective solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1014–1026     

Aurophilicity in gold(I) thiosemicarbazone clusters

The reaction of the phosphine thiosemicarbazone ligands HLPH and HLPMe with Au(I) ions yields the gold complexes [Au(3)(HLPH)(2)Cl(2)]Cl·2MeOH (1·2MeOH) and [Au(2)(HLPMe)Cl(2)] (2). The structures determined by X Ray diffraction, [Au(3)(HLPH)(2)Cl(2)]Cl·4MeOH (1·4MeOH) and [Au(2)(HLPMe)Cl(2)](2) (2), are the first examples of gold(I) thiosemicarbazone clusters showing aurophilicity. The structure of the trinuclear cation 1 contains the Au(1) atom located in an inversion centre, being connected to another gold(I) atom, Au(2), through a phosphino thiosemicarbazone molecule which acts as a S,P-bridging ligand. Additionally, every gold(I) atom in the trinuclear cation 1 assembles into trinuclear linear cluster units by means of close gold-gold interactions, being connected through the crystal cell in a 2D zigzag mode. The crystal structure of [Au(2)(HLPMe)Cl(2)](2) (2) contains one discrete molecule [(AuCl)(2)(HLPMe)] in the asymmetric unit, which is further assembled into tetranuclear [(AuCl)(2)(HLPMe)](2) units by means of close gold-gold interactions. Both clusters are highly luminescent in solution.