The thermodynamic properties of 4-pentenoic acid

The enthalpy of formation of liquid 4-pentenoic acid was determined by combustion calorimetry. The vapor pressure and enthalpy of vaporization of the compound were measured by the transfer method over the temperature range 289–324 K. Conformational analysis was performed. The equilibrium structure, fundamental vibrations, moments of inertia, and total energy of the stablest acid conformers were calculated by the B3LYP/6-311G(d, p) and G3MP2 quantum-chemical methods. The experimental IR spectrum and calculated vibrational frequencies were used to assign IR bands. The thermodynamic properties of monomeric 4-pentenoic acid in the ideal gas state were calculated over the temperature range 0–1500 K. Additive and quantum-chemical methods were used to estimate the Δ_f H°(g) and Δ_vap H° values. Close agreement between the calculation results and experimental data was obtained. It was shown that additive and quantum-chemical methods could be used for estimating the enthalpies of formation and vaporization of nonconjugated alkenoic acids.     

Do bacteria have an electric permanent dipole moment?

In the scientific literature in the last 40 years, some data for the permanent dipole moment and the electric polarizability of Escherichia coli can be found [S.P. Stoylov, Colloid Electro-Optics - Theory, Techniques and Application, Academic Press, London, 1991]. In this paper the data based mainly on electro-optic investigation is considered as much as some dipolophoretic (most often called dielectrophoretic) studies. Serious grounds are found to doubt the conclusions made for the electric dipole moments of bacteria by one of the authors of this paper (SPS) and by some other researchers. This concerns both the permanent dipole moment and the electric charge dependent polarizabilities of E. coli. Here, along with the discussion of the old experimental data, new experimental data are shown for a strain of E. coli HB101. The conclusions from the analysis of the old and the new experimental data is that they do not provide correct evidence for the presence of a permanent dipole moment. It seems that all statements for the existence of electric permanent dipole moment in bacteria [S.P. Stoylov, Colloid Electro-Optics - Theory, Techniques and Application, Academic Press, London, 1991; S.P. Stoylov, S. Sokerov, I. Petkanchin, N. Ibroshev, Dokl. AN URSS 180 (1968) 1165; N.A. Tolstoy, A.A. Spartakov, A.A. Trusov, S.A. Schelkunova, Biofizika 11 (1966) 453; V. Morris, B. Jennings, J. Chem. Soc. Faraday Trans. II 71 (1975) 1948; V. Morris, B. Jennings, J. Colloid Interface Sci. 55 (1978) 313; S.P. Stoylov, V.N. Shilov, S.S. Dukhin, S. Sokerov, I. Petkanchin, in: S.S. Dukhin (Ed.), Electro-optics of Colloids, Naukova Dumka, Kiev, 1977 (in Russian).] based on electro-optic studies are result of incorrect interpretation. Therefore, they should be further ignored.     

Membrane-bound alpha-synuclein forms an extended helix: long-distance pulsed ESR measurements using vesicles, bicelles, and rodlike micelles

We apply pulsed dipolar ESR spectroscopy (Ku-band DEER) to elucidate the global conformation of the Parkinson's disease-associated protein, alpha-synuclein (alphaS) bound to small unilamellar phospholipid vesicles, rodlike SDS micelles, or lipid bicelles. By measuring distances as long as approximately 7 nm between introduced pairs of nitroxide spin labels, we show that distances are close to the expectations for a single continuous helix in all cases studied. In particular, we find distances of 7.5 nm between sites 24 and 72; 5.5 nm between sites 24 and 61; and 2 nm between sites 35 and 50. We conclude that alphaS does not retain a "hairpin" structure with two antiparallel helices, as is known to occur with spheroidal micelles, in agreement with our earlier finding that the protein's geometry is determined by the surface topology rather than being constrained by the interhelix linker. While the possibility of local helix discontinuities in the structure of membrane-bound alphaS remains, our data are more consistent with one intact helix. Importantly, we demonstrate that bicelles produce very similar results to liposomes, while offering a major improvement in experimentally accessible distance range and resolution, and thus are an excellent lipid membrane mimetic for the purpose of pulse dipolar ESR spectroscopy.     

Activity of immobilized trypsin in the layer structure of polyelectrolyte microcapsules (PEMC)

Polyelectrolyte microcapsules composed by using the LbL technique on stabilized RBC as templates were coated with up to ten layer pairs of trypsin/PSS or trypsin/alginate. The trypsin layer growth was confirmed by particle electrophoresis, confocal laser scanning microscopy, flow cytometry, and protein determination according to Lowry. In the coating series with trypsin/PSS, the amount of immobilized enzyme was larger than that with trypsin/alginate. The enzyme immobilization led to activity reduction of up to 90% compared to that of the same enzyme amount in the solution. No significant differences between the activities of trypsin immobilized in combination with PSS and with alginate were found.     

Complex Activity and Sensor Potential toward Metal Ions in Environmental Water Samples of N-Phthalimide Azo-Azomethine Dyes

Herein, the spectral and electrochemical characterizations of three different substituted N-phthalimide azo-azomethine (NAA) dyes (L) containing an o-hydroxy group and their NAA-M(II) chelates [M(II): Cu, Ni, Co, Pb] were reported by using UV–Vis and fluorescence spectroscopy and potentiometric and voltamperometric techniques. The pK value of the dyes as well as the stoichiometry and stability of the NAA-metal chelates were studied, and the stoichiometry was found to be mostly 1:2 (ML₂) with high complex stability constant values. The sensor activity of N-phthalimide azo-azomethine derivatives toward pH and metal ions has been also investigated and tested for indicator application in acid–base analysis and detection of Cu(II) ions in real samples of surface river water using voltamperometric detection. The results showed that one of the ligands possesses the highest electrochemical response upon binding to copper ions and could be successfully used in the analysis of copper in water at a concentration range of the analyte from 3.7 × 10⁻⁷ to 5.0 × 10⁻⁶ mol L⁻¹, with analytical characteristics of the method being Sr = 1.5%, LOD = 3.58 µg L⁻¹ and LOQ =11.9 µg L⁻¹     

Polycarboxylic microsphere polymer gel for solid phase extraction of trace elements

A simple and sensitive method has been developed for the determination of trace elements (Cd, Co, Cu, Ni, Fe and Pb) in sea water and natural waters by electrothermal atomic absorption spectrometry. The method is based on column solid phase extraction of trace elements on a newly synthesized polycarboxylic gel. The sorbent was prepared by dispersion copolymerization of methacrylic acid (as a monomer) and trimethylolpropane trimethacrylate (as a crosslinking agent) in the form of monodisperse microspheres. It exhibits high regeneration ability, chemical and mechanical resistivity. The influence of pH, flow rates and concentration of the eluent on the degree of sorption of trace elements have been evaluated. The maximum static adsorption capacities of the sorbent at the optimal conditions for lead, nickel, cobalt, iron, cadmium and copper are determined. Detection limits achieved for the elements studied for 100 mL water sample volume were between 0.005 and 0.05 μg L^?1. The relative standard deviation varied in the range 5–13% for all elements studied. The validity of the method was checked by an analysis of standard reference material SRLS-3 Riverine Water. Very good agreement between the analytical results and the certified values (t-test at 95% confidence level) was observed. The new polycarboxylic gel was applied to passive sampling procedures due to its high chemical and mechanical stability.     

The thermodynamic properties of alkylated γ-lactones

The enthalpies of formation of γ-pentanolactone (I), γ-hexanolactone (II), and γ-nonanolactone (III) were determined by combustion calorimetry. The enthalpies of vaporization of these lactones were measured by the transfer method. Conformational analysis was performed and equilibrium structures, sets of fundamental vibrations, moments of inertia, and total energies of the stablest conformers of I, II, and III were calculated by the B3LYP/6-311G(d,p), G3MP2, and CBS-QB3 methods. The experimental IR spectra and calculated vibrational frequencies were used to obtain sets of fundamental vibrations of the stablest conformations. The thermodynamic properties of I–III in the ideal gas state were determined over the temperature range 0–1500 K. Additive and quantum-chemical methods were applied to estimate the Δ_f H ^o(g) values of a number of γ-lactones. Composite quantum-chemical methods were used to obtain the energies of monomethyl γ-butyrolactones and estimate their relative stability depending on the position of the methyl substituent in the ring.     

Ion-imprinted polymethacrylic microbeads as new sorbent for preconcentration and speciation of mercury

Metal ion-imprinted polymer particles have been prepared by copolymerization of methacrylic acid as monomer, trimethylolpropane trimethacrylate as cross-linking agent and 2,2′-azobisisobutyronitrile as initiator, in the presence of Hg(II)-1-(2-thiazolylazo)-2-naphthol complex. The separation and preconcentration characteristics of the Hg-ion-imprinted microbeads for inorganic mercury have been investigated by batch procedure. The optimal pH value for the quantitative sorption is 7. The adsorbed inorganic mercury is easily eluted by 2 mL 4 M HNO₃. The adsorption capacity of the newly synthesized Hg ion-imprinted microbeads is 32.0 μmol g⁻¹ for dry copolymer. The selectivity of the copolymer toward inorganic mercury (Hg(II)) ion is confirmed through the comparison of the competitive adsorptions of Cd(II), Co(II), Cu(II), Ni(II), Pb(II), Zn(II)) and high values of the selectivity and distribution coefficients have been calculated. Experiments performed for selective determination of inorganic mercury in mineral and sea waters showed that the interfering matrix does not influence the extraction efficiency of Hg ion-imprinted microbeads. The detection limit for inorganic mercury is 0.006 μg L⁻¹ (3σ), determined by cold vapor atomic adsorption spectrometry. The relative standard deviation varied in the range 5-9 % at 0.02-1 μg L⁻¹ Hg levels. The new Hg-ion-imprinted microbeads have been tested and applied for the speciation of Hg in river and mineral waters: inorganic mercury has been determined selectively in nondigested sample, while total mercury e.g. sum of inorganic and methylmercury, has been determined in digested sample.     

Spectroscopic investigation of calcium binding sites in the neurotoxin vipoxin and its components-relation with the X-ray structure

Vipoxin is a neurotoxin from the venom of Vipera ammodytes meridionalis, the most toxic snake in Europe. It is a unique complex of a toxic phospholipase A2 (PLA2) and a non-toxic PLA2-like protein inhibitor (Inh) which probably evolved from the enzyme and reduces its activity and toxicity. The enzymatic activity of Vipoxin is Ca2+-dependent and the interaction of this metal ion with the neurotoxic complex and its separated components was investigated using the fluorescent probe ANS. Vipoxin binds two calcium ions, one per each subunit. The X-ray model of the Ca2+-free neurotoxin shows that the potential metal-binding sites require minor structural changes to bind calcium. The dissociation constants K(2+)Ca of the calcium complexes of Vipoxin and its components, PLA2 and Inh, were determined to be 16, 10 and 9 mM, respectively. The affinity for calcium of Vipoxin is reduced in comparison to those of PLA2 and Inh. The X-ray model shows that the potential Ca2+-binding sites in the two components are partially 'shielded' in the complex. The affinity of the neurotoxin to Sr2+ and Ba2+ is lower and the respective K(2+)Ca are 20 and 30 mM. The saturation of Ca2+-binding sites increased the melting point Tm of Vipoxin by 11 degrees C and the activation energy for the thermal deactivation of the excited tryptophans Ea by 11 kJ mol(-1) x Ca2+ is important not only for the enzymatic activity of Vipoxin but also for its thermostability.