Furan ring oxidation strategy for the synthesis of macrosphelides A and B

By using the convenient protocol for conversion of 2-substituted furans into 4-oxo-2-alkenoic acids ((i) NBS, (ii) NaClO(2)), macrosphelide B (2) was synthesized from furyl alcohol 5 (>98% ee) and acid 6 (99% ee). The protocol was first applied to the PMB ether of 5 to afford acid 13b. On the other hand, DCC condensation of acid 6 with 5 gave 16 after deprotection of the TBS group. Condensation was again carried out between 13b and 16 to furnish the key ketone 17, which upon reduction with Zn(BH(4))(2) afforded anti alcohol 18 stereoselectively (15:1). After protection/deprotection steps, the furan 18 was converted to seco acid 3 by using the furan oxidation protocol mentioned above, and lactonization of 3 with Cl(3)C(6)H(2)COCl, Et(3)N, and DMAP afforded 22 (MOM ether of 2), which upon deprotection with TFA produced 2. Transformation of 22 to macrosphelide A (1) was then investigated. Although the chelation-controlled reduction of 22 should afford the desired anti alcohol 24, Zn(BH(4))(2) at <-90 degrees C gave a 2 approximately 1:1 mixture of anti/syn alcohols. On the contrary, reduction with NaBH(4) in MeOH at -15 degrees C produced the syn isomer 23 with >10:1 diastereoselectivity. Mitsunobu inversion of the resulting C(14)-hydroxyl group and deprotection of the MOM group with TFA afforded 1. Similarly, reduction of 2 with NaBH(4) afforded the C(14)-epimer of 1 stereoselectively. The observed stereoselectivity in the reductions of 22 and 2 could be explained on the basis of computer-assisted calculation, which showed presence of the low-energy conformers responsible for the stereoselective reduction. In addition, conversion of 2 to 1 was established, for the first time.     

THE PHOTOREACTIVITY OF PYRIMIDINE-PURINE SEQUENCES IN SOME DEOXYDINUCLEOSIDE MONOPHOSPHATES AND ALTERNATING DNA COPOLYMERS

Abstract— A reversed-phase HPLC system has been developed which separates the common nucleo-bases from the 6-methylimidazo[4,5- b ]pyridin-5-one (6-MIP) produced on acid hydrolysis of a thymine-adenine photoadduct (TA*) that is formed between adjacent thymine and adenine bases in UV-irradiated polydeoxyribonucleotides. By measuring the relative amounts of adenine and 6-MIP in acid hydrolysates, this system has been used to investigate how polynucleotide conformation affects the yield of TA* in poly(dA-dT) irradiated at 254 nm. The photoreactivity of other pyrimidine-purine sequences has been examined with the deoxydinucleoside monophosphates d(TpI) and d(m⁵CpA) and with the alternating DNA copolymers poly(dA-dU), poly(dI-dC), poly(dG-dC) and poly(dA-dC).poly(dG-dT). Samples were irradiated at 254 nm in aqueous solution and in ice, and at wavelengths >290 nm with acetone as photosensitizer. A photoproduct resembling TA*, and giving 6-MIP on acid hydrolysis, was isolated from d(TpI) irradiated at 254 nm in solution or in ice; d(m⁵CpA) was comparatively unreactive. Acid hydrolysates of the irradiated DNA copolymers were screened by HPLC and by TLC and paper electrophoresis, for the presence of imidazo[4,5- b ]pyridin-5-one, 6-MIP, or other species attributable to specific photoproduct formation. By this criterion, however, none of the copolymers showed evidence of significant photoreactivity in either their single- or double-stranded conformational states. The formation of mixed pyrimidine-purine photoadducts in DNA is therefore probably restricted to T-A doublets.     

NMR spectroscopic study of the inclusion complex of desloratadine with β-cyclodextrin in solution

Desloratadine (DES) is an antihistamine used in the treatment of allergies and chronic urticaria. ¹H NMR spectroscopic study of varying ratios of DES and β-Cyclodextrin (β-CD) in D₂O suggests the formation of a 1:1 inclusion complex formed by the penetration of Cl-substituted aromatic ring into the β-CD cavity. The stoichiometry and binding constant of the complex were determined by Scott’s method.     

Development of Odorless Thiols and Sulfides and Their Applications to Organic Synthesis

Summary. Development of new odorless thiols (dodecanethiol, 4-n-heptylphenylmethanethiol, 4-trimethylsilylphenylmethanethiol, 4-trimethylsilylbenzenethiol) and an odorless sulfide (1-methylsulfanyldodecane) and their applications to dealkylation, Michael addition, Swern oxidation, and Corey-Kim oxidation are described.     

Spectroscopic and biological studies on newly synthesized nickel(II) complexes of semicarbazones and thiosemicarbazones

Nickel(II) complexes, having the general composition Ni(L)2X2, have been synthesized [where L: isopropyl methyl ketone semicarbazone (LLA), isopropyl methyl ketone thiosemicarbazone (LLB), 4-aminoacetophenone semicarbazone (LLC) and 4-aminoacetophenone thiosemicarbazone (LLD) and X=Cl-, 1/2SO(4)2-]. All the Ni(II) complexes reported here have been characterized by elemental analyses, magnetic moments, IR, electronic and mass spectral studies. All the complexes were found to have magnetic moments corresponding to two unpaired electrons. The possible geometries of the complexes were assigned on the basis of electronic and infrared spectral studies. Newly synthesized ligand and its nickel(II) complexes have been screened against different bacterial and fungal growth.     

Macrocyclization of bis-indole quinolines for selective stabilization of G-quadruplex DNA structures

The recognition of G-quadruplex (G4) DNA structures as important regulatory elements in biological mechanisms, and the connection between G4s and the evolvement of different diseases, has sparked interest in developing small organic molecules targeting G4s. However, such compounds often lack drug-like properties and selectivity. Here, we describe the design and synthesis of a novel class of macrocyclic bis-indole quinolines based on their non-macrocyclic lead compounds. The effects of the macrocyclization on the ability to interact with G4 DNA structures were investigated using biophysical assays and molecular dynamic simulations. Overall, this revealed compounds with potent abilities to interact with and stabilize G4 structures and a clear selectivity for both G4 DNA over dsDNA and for parallel/hybrid G4 topologies, which could be attributed to the macrocyclic structure. Moreover, we obtained knowledge about the structure–activity relationship of importance for the macrocyclic design and how structural modifications could be made to construct improved macrocyclic compounds. Thus, the macrocyclization of G4 ligands can serve as a basis for the optimization of research tools to study G4 biology and potential therapeutics targeting G4-related diseases.

Macrocyclization improves the selectivity, affinity, and ability to stabilize G4 DNA structures.     

Synthesis and binding studies of new bis-calix[4]arenes containing aromatic and heteroaromatic units

A series of new bis-calix[4]arenes containing different aromatic and heteroaromatic moieties have been synthesized. The complexing behavior of these bis-calix[4]arenes have been studied towards different metal ions and it has been found that these bis-calix[4]arenes bind silver ions selectively over other metal ions. The complexation has been studied by liquid-liquid extraction and by NMR and IR spectroscopy.     

Thermodynamics of molecular interactions in ethyl iodide+toluene mixtures

The excess Gibb's free energy of mixing, G^E, for ethyl iodide+toluene at 25°C have been obtained from the measured vapor pressuure data. The H^E and G^E values for ethyl iodide+toluene are positive throughout the ethyl iodide concentration range and G^E>H^E. The results have been analyzed in terms of Flory and ideal associated model theory of nonelectrolyte solutions. It has been observed that the ideal associated model approach which assumes the presence of AN and A₂B molecular species describes well (within±10 J-mol^–1 in the worst case) the general dependence of H^E on X_A (mole fraction of ethyl iodide) over the whole composition range for ethyl iodide+toluene mixtures. The equilibrium constants for A+A AB and 2A+BA₂B reactions along with the enthalpies of formation of AB and A₂B molecular species have been calculated.     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.