Hydrolysis of HNSO2: A potential route for atmospheric production of H2SO4 and NH3

The hydrolysis of sulfonylamine (HNSO₂) results in the formation of sulfuric acid along with ammonia, and is of significant interest due to their negative impact on environment and life on Earth. The formation of H₂SO₄ through the reaction of HNSO₂ with (H₂O)_2-4 has been studied using high level electronic structure calculations. This hydrolysis reaction is a step-wise process, in the first step a H-atom from H₂O is transferred to the N-atom of HNSO₂ which results in the formation of NH₂, and in the next step, H₂SO₄, NH₃ and water molecule(s) are formed. The results show that the energy barrier associated with the formation of intermediates and product complexes is reduced by 7 to 10 kcal/mol when the number of water molecules is increased from 2 to 4. The rate constant was calculated using canonical variational transition state theory with small curvature tunneling correction over the temperature range of 200 to 1000 K. At 298 K, the calculated rate constant for the formation of intermediate in the first step is 2.24 × 10⁻¹⁶, 1.03 × 10⁻¹², and 2.10 × 10⁻¹¹ cm³ mol⁻¹ s⁻¹, respectively, for the reaction with water dimer, trimer and tetramer. The calculated enthalpy and free energy show that the reaction corresponding to the formation of H₂SO₄ is highly exothermic and exoergic in nature.     

Amphiphilic laminin peptides at air/water interface--effect of single amino acid mutations on surface properties

Amphiphilic derivative of the laminin peptide YIGSR and three other mutated peptides with mutation at Y with V (valine), I (isoleucine), and L (leucine) have been synthesized. The monolayer formation and the stability of these peptide analogues at air/water interface and the interaction with phospholipid monolayers have been studied using surface pressure-molecular area (pi-A) and surface potential-molecular area (DeltaV-A) isotherms. The single amino acid mutation in the native sequence leads to appreciable changes in surface activity, orientation and insertion into lipid monolayers with LIGSR showing most hydrophobic character while YIGSR showed most polar nature. The morphology of spread monolayers in the most close packed state was carried out using Brewster angle microscopy (BAM). LB films of these amphiphilic peptide derivatives transferred to hydrophilic quartz surfaces and hydrophobically modified surfaces showed significant changes in the work of adhesion as well as spreading behavior of water with the L substituted sequence showing maximum work of adhesion and the native sequence YIGSR, the least work of adhesion. From theoretical estimates, the long-range effects of the different amino acid residues in position 1 on the alkyl chains have been studied from charge on the carbon and hydrogen atoms of the alkyl tails. The present study demonstrates that amphiphilic derivatives of the laminin peptide YIGSR show enhanced activity compared to the original sequence. This work shows that the amino acid substituents on the head group clearly influence the distal methylene groups of the tail. Thus, any mutation of even single amino acid in a peptide sequence influences and plays an important role in determining macroscopic properties such as surface energy and adhesion both at air/solution and solid/solution interfaces.     

Single-layer graphene oxide sheet: a novel substrate for dip-pen nanolithography

Graphene oxide (GO) sheet is used as a novel substrate for dip-pen nanolithography (DPN). After GO is transferred onto SiO(2) using the Langmuir-Blodgett technique, CoCl(2) is patterned on both GO and exposed SiO(2) substrates simultaneously by DPN, which is used for growth of different structured carbon nanotubes.     

New approximate analytical expressions for transient concentration profiles and current pertaining to a homogeneous chemical reaction at hemispherical microelectrodes

A mathematical model corresponding to homogeneous chemical reactions under transient chronoamperometry conditions at hemispherical microelectrodes has been developed. The analytical solutions for the concentration of species and current were obtained using Duhamel's theorem. This closed-form theoretical expression pertains to the transient concentration profiles and fluxes of chemical species involved in chemical and electrochemical reactions at hemispherical microelectrodes. As t → ∞, the analytical expressions corresponding to the concentration and current approach steady-state values. The solutions obtained are explicit only under limiting current conditions. The approximate expressions for concentrations and current as functions of time corresponding to the EC' and CE mechanisms at hemispherical microelectrodes are also reported.     

Gas bubbles in simulation and experiment

An experimental setup for the examination of single bubbles, rising in a liquid, is presented. Its main part is a rotating chamber, in which the bubble is spatially stabilized by a balance of buoyancy, drag, and lift forces. This allows for long observation periods in time. Experimental results are presented for air bubbles in silicone oil. The experimental results are validated by a comparison with numerical simulations. A modified, mass-conserving level-set method is used for the representation of the free interface, while an immersed-boundary formulation is engaged for the conservation equations. The agreement between experiment and simulation, and to available correlations from literature, is found to be perfect. It is shown that the influence of the liquid shear due to the rotation is negligible. Also, for the presented liquid system, no influence by Marangoni stresses could be found, which makes the system of air and silicone oil a good choice for validation purposes.     

Sodium Bismuthate Mediated Oxidation of Allylic and Benzylic Alcohols

A simple and readily available oxidation of primary allylic and benzylic alcohols to the corresponding aldehydes is carried out by sodium bismuthate in acetic acid.     

PAMAM Dendrimers as Anchors for the Preparation of Electrocatalytically Active Ultrathin Metallic Films

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine‐terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self‐assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and “dendrichips”; hence, they could find applications in the fields of sensors, fuel cells, and waste‐water treatment.     

Structural characterization and oxidative dehydrogenation activity of V2O5/Ce(x)Zr(1-x)O2/SiO2 catalysts

The thermal stability of a nanosized Ce(x)Zr(1-x)O2 solid solution on a silica surface and the dispersion behavior of V2O5 over Ce(x)Zr(1-x)O2/SiO2 have been investigated using XRD, Raman spectroscopy, XPS, HREM, and BET surface area techniques. Oxidative dehydrogenation of ethylbenzene to styrene was performed as a test reaction to assess the usefulness of the VOx/Ce(x)Zr(1-x)O2/SiO2 catalyst. Ce(x)Zr(1-x)O2/SiO2 (1:1:2 mol ratio based on oxides) was synthesized through a soft-chemical route from ultrahigh dilute solutions by adopting a deposition coprecipitation technique. A theoretical monolayer equivalent to 10 wt % V2O5 was impregnated over the calcined Ce(x)Zr(1-x)O2/SiO2 sample (773 K) by an aqueous wet impregnation technique. The prepared V2O5/Ce(x)Zr(1-x)O2/SiO2 sample was subjected to thermal treatments from 773 to 1073 K. The XRD measurements indicate the presence of cubic Ce0.75Zr0.25O2 in the case of Ce(x)Zr(1-x)O2/SiO2, while cubic Ce0.5Zr0.5O2 and tetragonal Ce0.16Zr0.84O2 in the case of V2O5/Ce(x)Zr(1-x)O2/SiO2 when calcined at various temperatures. Dispersed vanadium oxide induces more incorporation of zirconium into the ceria lattice, thereby decreasing its lattice size and also accelerating the crystallization of Ce-Zr-O solid solutions at higher calcination temperatures. Further, it interacts selectively with the ceria portion of the composite oxide to form CeVO4. The RS measurements provide good evidence about the dispersed form of vanadium oxide and the CeVO4 compound. The HREM studies show the presence of small Ce-Zr-oxide particles of approximately 5 nm size over the surface of amorphous silica and corroborate with the results obtained from other techniques. The catalytic activity studies reveal the ability of vanadium oxide supported on Ce(x)Zr(1-x)O2/SiO2 to efficiently catalyze the ODH of ethylbenzene at normal atmospheric pressure. The remarkable ability of Ce(x)Zr(1-x)O2 to prevent the deactivation of supported vanadium oxide leading to stable activity in the time-on-stream experiments and high selectivity to styrene are other important observations.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.