Computation of collective modes and acoustic investigations at different temperatures of vitrous silica

This paper is mainly concerned with elastic and acoustic properties of vitrous silica besides the computation of phonon frequencies. Thus the phonon frequencies of vitrous silica have been calculated assuming the electronic bulk modulus,K _e, as equal to zero. New equations have been derived to relate the pressure derivatives of second order elastic constants to the acoustic Gruneisen’s parameters using both Bhatia-Singh’s parameters and Schofield’s equations. The calculated longitudinal and transverse Gruneisen’s parameters and the predicted absorption band spectra from Nagendranath’s equation and Bhatia Singh’s parameters are in good agreement with experiment. The calculated mean acoustic mode Gruneisen’s parameter evaluated from the pressure derivative of Nagendranath’s equation is also in good agreement with experiment. An erratum to this article is available at .     

Azo-hydrazo Tautomerism and Inclusion Complexation of 1-phenylazo-2-naphthols with Various Solvents and β-cyclodextrin

Spectral characteristics of sudan I (SDI), sudan II (SDII) and mordant violet-5 (MV5) have been studied in various solvents and β-cyclodextrin (β-CD). The inclusion complex of the above molecules with β-CD was analyzed by UV-visible, fluorometry, and DFT methods. The solvent study shows that azo-hydrazo tautomer is present in these molecules. The increase in the fluorescence intensity and a large bathochromic shift in the S₁ state indicate these molecules forms 1:1 inclusion complex with β-CD.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

Global activities in the world of reference materials including the needs of developing countries

Proceedings of previous BERM meetings have been used to assess emerging trends in the development of RMs to meet AQC requirements of clinical, food, nutrition, and environmental health areas. BRM-1 reflected a strong need to initiate and expand RM activities for certifying organic nutrients in foods. BRM-2 highlighted the distinction between primary (certified) and secondary (e.g. check samples for proficiency testing) RMs¹. BRM-3 identified the need for producing different levels of an analyte in a given matrix (spiked standards) to address matrix related measurement problems in foods. BERM-4 highlighted the need for a global vision in dealing with standards, illustrated by the activities of GESREM. Also, the logistics required for setting up intercomparison programs related to food safety monitoring programs were outlined. BERM-5 presented the changing outlook of the AOAC International in recognizing the usefulness of incorporating RMs for use in conjunction with their methods validation protocol. BERM-6 brought to the forefront the concern for traceability of chemical measurements to internationally recognized standards. BERM-7 recognized the need for multidisciplinary approaches for preparing certain types of CRMs, partly in response to the measurement needs arising from governmental regulations dealing with food safety and environmental health criteria. Finally, BERM symposia have promoted a meaningful dialogue on the RM needs of African, Asian and South American countries and provided the developing countries opportunities to discuss their problems with the international analytical community. The issue of health safety is involved in movement of foodstuffs between countries, and therefore, international efforts as voiced by the World Health Organization to provide guidance and assistance in AQC matters to the needy countries deserve consideration.     

2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid immobilized Amberlite XAD-16 as metal extractant

2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid (DMABA) was loaded on Amberlite XAD-16 (AXAD-16) via azo linker and the resulting resin AXAD-16-DMABA explored for enrichment of Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II). The optimum pH values for extraction are 6.5-7.0, 5.0-6.0, 5.5-7.5, 5.0-6.5, 6.5-8.0, 5.5-7.0, 4.0-5.0 and 6.0-7.0, respectively. The sorption capacity was found between 97 and 515 μmol g⁻¹ and the preconcentration factors from 100 to 450. Tolerance limits for foreign species are reported. The kinetics of sorption is fast as t_1/2 is ≤5 min. The chelating resin can be reused for 50 cycles of sorption-desorption without any significant change (<1.5%) in the sorption capacity. The limit of detection values (blank +3 s) are 1.12, 1.38, 1.76, 0.67, 0.77, 2.52, 5.92 and 1.08 μg L⁻¹ for Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II), respectively. The enrichment on AXAD-16-DMABA coupled with monitoring by flame atomic absorption spectrometry (FAAS) is used to determine all the metal ion ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples.     

<Superscript>90</Superscript>Y-DOTA-Lanreotide: A potential agent for targeted therapy

Several human tumors such as neuroendocrine tumors, medullary thyroid carcinoma, etc., express somatostatin receptors which specifically bind somatostatin and its analogues such as lanreotide, octreotide, etc. In order to prepare a therapeutic agent for targeting such tumors, attempts were made to prepare ⁹⁰Y-DOTA-Lanreotide. Lanreotide could be successfully conjugated with the macrocyclic chelating agent DOTA (1,4,7,10-tetraaza cyclododecane tetracetic acid) which forms stable complexes with ⁹⁰Y. ⁹⁰Y-DOTA-Lanreotide could be prepared in >98% radiochemical purity and remained stable for 72 hours at room temperature. The tracer showed specific binding to A431 cells. Biodistribution studies in C57BL6 mice bearing melanoma showed ∼1.3% uptake pergram of tumor at 24-hour p.i.     

Reaction of alpha-oxoketene-N,S-arylaminoacetals with Vilsmeier reagents: an efficient route to highly functionalized quinolines and their benzo/hetero-fused analogues

A simple, highly efficient, and regioselective synthesis of functionalized quinolines through Vilsmeier cyclization of a variety of alpha-oxoketene-N,S-anilinoacetals has been reported. The cyclization is found to be facile with N,S-acetals bearing strongly activating groups on aniline, whereas yields of quinolines are moderate in other cases. The reaction could also be extended for the synthesis of substituted tricyclic benzo[h]quinoline, pyrido[2,3-h]quinoline, 4,7-diphenylphenanthroline, and tetracyclic quino[8,7-h]quinoline by performing a Vilsmeier reaction on N,S-acetals derived from 1-naphthylamine, m-phenylenediamine, o-phenylenediamine, and 1,5-diaminonaphthalene, respectively. A few of the newly synthesized quinolines are subjected to further transformation to afford 2-unsubstituted (Raney-Ni/Ethanol), quinoline-5,8-quinone (NBS/H(2)SO(4)), or 2-alkyl/aryl aminoquinolines through sequential m-CPBA oxidation to the corresponding (2-methylsulfonyl)quinoline followed by replacement with appropriate amines. Similarly, cycloannulation of a few 2-methylthio-3-benzoylquinolines with hydrazine hydrate under microwave irradiation afforded the corresponding substituted and fused pyrazolo[3,4-b]quinolines in excellent yields, whereas TBTH/AIBN-mediated cyclization of the corresponding 3-(2-bromobenzoyl)-2-methylthioquinolines yielded the corresponding benzothiopyrano-fused quinolines through radical translocation.     

Synthesis,Structures, and Fungitoxicity of Novel Organophosphorus Compounds

Abstract

A series of biologically active organophosphorus compounds have been synthesized by the reactions of O,O-diethylchlorophosphate with Schiff bases derived from 5-(phenyl/substituted phenyl)-2-hydrazino-1,3,4-oxadiazole and salicylaldehyde/2-hydroxyacetophenone. The compounds have been characterized on the basis of analyses and spectral (IR, ¹H, ¹³C NMR) data. Fungicidal activities of these derivatives against Colletotrichum falcatum, Fusarium oxysporum, and Curvularia pallescence have been evaluated. All compounds showed moderate to significant antifungal activity.     

Physicochemical studies of molecular hyperpolarizability of imidazole derivatives

A series of substituted imidazoles have been synthesized in very good yield under solvent free condition by grinding 1,2-diketone, arylaldehyde, arylamine and ammonium acetate in the presence of molecular iodine as the catalyst. The short reaction time, good yield and easy workup make this protocol practically and economically attractive and the imidazoles are characterized by NMR spectra, X-ray, mass and CHN analysis. The push-pull character of series of imidazoles have been analyzed by the quotient of the occupations of the bonding (π) and anti-bonding (π*) orbitals of the central linking -N=C-C=C- unit. Excellent correlation of the push-pull parameter with the corresponding bond lengths d(CN) and d(CC) strongly recommend both the occupation quotients (π*/π) and the corresponding bond lengths are reasonable sensors for quantifying the push-pull character and for the molecular hyperpolarizability ?(0) of these compounds. To support the experimental results, theoretical calculations (heat of formation, NLO, NBO and vibrational analysis) were also made. Within this context, reasonable conclusions concerning the steric hindrance in the chromospheres, push-pull character, hyperpolarizability of the imidazoles and their application as NLO materials will be drawn.