Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Preconcentration and determination of calcium and magnesium in brine with flow-injection systems

On-line preconcentration on a chelating resin (Dowex A-1) and elution with 0.1 M hydorchloric acid is followed by spectrophotometry based on the metal complexes formed with 1- (2-hydroxy-4-diethylamino-1-phenylazo)-2-hydroxynaphthalene-3,6-disulfonic acid. The total concentration of calcium and magnesium is determined; in a second sample, calcium is masked with a ligand buffer containing excess of barium(II) and EGTA, and magnesium is determined. The calcium concentration is measured by difference. Magnesium (1–30 μg l^?1 and calcium (8– 10 μg l^?1) in 2.5 M sodium chloride can be determined. Calcium and magnesium in analytical reagent-grade sodium chloride and potassium chloride and primary standard sodium chloride are aslo determined. The method based on the exchange between calcium ions and Mg(EDTA) is proposed to enchance the sensitivity for calcium.     

Thermodynamic interactions in binary mixtures of anisole with ethanol, propan-1-ol, propan-2-ol, butan-1-ol, pentan-1-ol, and 3-methylbutan-1-ol at T = (298.15, 303.15, and 308.15) K

In this paper, excess thermodynamic functions have been computed from the measured values of density, viscosity, and refractive index at T = (298.15, 303.15, and 308.15) K, ultrasonic velocity at T = 298.15 K over the entire mixture composition range of (anisole with ethanol, propan-1-ol, propan-2-ol, butan-1-ol, pentan-1-ol, or 3-methyl butan-1-ol). Excess molar volume, V^E has been calculated from densities, whereas deviations in viscosity, Δη, were computed from the measured viscosities. From ultrasonic velocities, isentropic compressibilities were calculated, from which deviations in isentropic compressibility, Δk_s have been computed. Lorenz-Lorentz mixture rule was used to compute molar refractivity, R from refractivity index data and from these data, deviations in molar refractivity, ΔR have been computed. Computed thermodynamic quantities have been fitted to Redlich and Kister polynomial equation to derive the coefficients and standard errors between experimental and predicted quantities. Intermolecular interactions between anisole and alkanols have been studied based on the computed excess thermodynamic quantities.     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Synthesis of Monosaccharide‐Derived Spirocyclic Cyclopropylamines and Their Evaluation as Glycosidase Inhibitors

The glucose‐, mannose‐, and galactose‐derived spirocyclic cyclopropylammonium chlorides 1a – 1d, 2a – 2d and 3a – 3d were prepared as potential glycosidase inhibitors. Cyclopropanation of the diazirine 5 with ethyl acrylate led in 71% yield to a 4 : 5 : 1 : 20 mixture of the ethyl cyclopropanecarboxylates 7a – 7d , while the Cu‐catalysed cycloaddition of ethyl diazoacetate to the exo‐glycal 6 afforded 7a – 7d (6 : 2 : 5 : 3) in 93–98% yield (Scheme 1). Saponification, Curtius degradation, and subsequent addition of BnOH or t‐BuOH led in 60–80% overall yield to the Z‐ or Boc‐carbamates 11a – 11d and 12a – 12d , respectively. Hydrogenolysis of 11a – 11d afforded 1a – 1d , while 12a – 12d was debenzylated to 13a – 13d prior to acidic cleavage of the N‐Boc group. The manno‐ and galacto‐isomers 2a – 2d and 3a – 3d , respectively, were similarly obtained in comparable yields (Schemes 2 and 4). Also prepared were the differentially protected manno‐configured esters 24a – 24d ; they are intermediates for the synthesis of analogous N‐acetylglucosamine‐derived cyclopropanes (Scheme 3). The cyclopropylammonium chlorides 1a – 1d, 2a – 2d and 3a – 3d are very weak inhibitors of several glycosidases (Tables 1 and 2). Traces of Pd compounds, however, generated upon catalytic debenzylation, proved to be strong inhibitors. PdCl is, indeed, a reversible, micromolar inhibitor for the β‐glucosidases from C. saccharolyticum and sweet almonds (non‐competitive), the β‐galactosidases from bovine liver and from E. coli (both non‐competitive), the α‐galactosidase from Aspergillus niger (competitive), and an irreversible inhibitor of the α‐glucosidase from yeast and the α‐galactosidase from coffee beans. The cyclopropylamines derived from 1a – 1d or 3a – 3d significantly enhance the inhibition of the β‐glucosidase from C. saccharolyticum by PdCl , lowering the K_i value from 40 μM (PdCl ) to 0.5 μM for a 1 : 1 mixture of PdCl and 1d . A similar effect is shown by cyclopropylamine, but not by several other amines.     

Spectrophotometric determination of copper(II) and its application to a plant sample containing zinc,iron, and manganese

Salicylaldehyde thiosemicarbazone instantaneously forms a green complex with copper(II) in the optimum pH range 5–7. A fivefold molar excess of the reagent is sufficient for the full development of the color. Beer's law is obeyed in the range 0.5–6.0 ppm of copper. The optimum concentration range as evaluated by Ringbom's method is 1.4–5.8 ppm. At 375 nm the sensitivity of the reaction and the molar absorptivity are 0.006 μg cm^?2 and 9.2 × 10³ liters mol^?1 cm^?1, respectively. The effects of pH, reagent concentration, time, order of addition of the solutions, and the interference of various ions were investigated. Copper in plant samples, containing zinc, iron, and manganese, was determined.     

Design,Synthesis and Anticancer Activity of 1,2,4-Thiadiazole Derivatives Bearing 1,2,4-Oxadiazole

Russian Journal of General Chemistry - A series of novel 1,2,4-thiadiazole derivatives bearing 1,2,4-oxadiazole is synthesized. Structures of the synthesized compounds are confirmed by 1H and 13C...     

A sensitive LC‐MS/MS method for the quantification of febuxostat in human plasma and its pharmacokinetic application

An improved, simple and highly sensitive LC‐MS/MS method has been developed and validated for quantification of febuxostat with 100 μL human plasma using febuxostat‐d₇ as an internal standard (IS) according to regulatory guidelines. The analyte and IS were extracted from human plasma via liquid–liquid extraction using diethyl ether. The chromatographic separation was achieved on a Zorbax C₁₈ column using a mixture of acetonitrile and 5 mm ammonium formate (60:40, v/v) as the mobile phase at a flow rate of 0.5 mL/min. The total run time was 5.0 min and the elution of febuxostat and IS occurred at 1.0 and 1.5 min, respectively. A linear response function was established for the range of concentrations 1–6000 ng/mL (r > 0.99). The precursor to product ion transitions monitored for febuxostat and IS were m/z 317.1 → 261.1 and 324.2 → 262.1, respectively. The intra‐ and inter‐day precisions (%RSD) were within 1.29–9.19 and 2.85–7.69%, respectively. The proposed method was successfully applied to pharmacokinetic studies in humans. Copyright © 2013 John Wiley & Sons, Ltd.