A convenient new and efficient commercial synthetic route for dasatinib (Sprycel®)

A new and efficient synthetic route for dual-Src/Abl kinase inhibitor dasatinib (Sprycel®), an anticancer drug, is described. This commercially viable process yields dasatinib monohydrate free of potential impurities with consistent yield of 68% in route A and 61% in route B with HPLC purity >99.80% over four stages.     

Evaluation of heat capacity measurements by temperature-modulated differential scanning calorimetry

Temperature-modulated differential scanning calorimetry (TMDSC) is known to have the ability to measure heat capacity of materials more accurately than the conventional differential scanning calorimeter. However, the accuracy of the measured heat capacity displays significant dependence on various experimental parameters such as period of modulation (p), amplitude of modulation (a), geometry of sample (g), heating rate (r), etc. One of the key features of this system is the ability to measure heat capacity under quasi-isothermal conditions. In the present investigation, heat capacity of a well-established system namely sapphire and thoria was measured by TMDSC under dynamic mode and also under quasi-isothermal mode. The experimental parameters, mentioned above p, a, g, and r are varied to establish the conditions for measuring heat capacity accurately.     

Thermal expansion and heat capacity of dysprosium hafnate

Dysprosium hafnate is a candidate material for as control rods in nuclear reactor because dysprosium (Dy) and hafnium (Hf) have very high absorption cross-sections for neutrons. Dysprosium hafnate (Dy₂O₃·2HfO₂-fluorite phase solid solution) was prepared by solid-state as well as wet chemical routes. The fluorite phase of the compound was characterized by using X-ray diffraction (XRD). Thermal expansion characteristics were studied using high temperature X-ray diffraction (HTXRD) in the temperature range 298–1973 K. Heat capacity measurements of dysprosium hafnate were carried out using differential scanning calorimetry (DSC) in the temperature range 298–800 K. The room temperature lattice parameter and the coefficient of thermal expansion are 0.5194 nm and 7.69 × 10⁻⁶ K⁻¹, respectively. The heat capacity value at 298 K is 232 J mol⁻¹ K⁻¹.     

Effect of Li2O content on physical and structural properties of vanadyl doped alkali zinc borate glasses

The effect of Li₂O content in vanadyl doped 20ZnO+xLi₂O+(30−x)Na₂O+50B₂O₃ (5≤x≥25) glasses has been studied with respect to their physical and structural properties. The absence of sharp peaks in XRD spectra of these glass samples confirms the amorphous nature. The physical parameters like density, refractive index, ionic concentration and electronic polarizability vary non-linearly with x mol% depending on the diffusivities of alkali ions. EPR and optical absorption spectra reveal that the resonance signals are characteristics of VO²⁺ ions in tetragonally compressed octahedral site. Spin-Hamiltonian, crystal field, tetragonal field and bonding parameters are found to be in good agreement with the other reported glass systems. The tetragonal distortion (g_⊥-g_∥) and Dt reveals that their values vary non-linearly with Li₂O content and reaches a minimum at x=10 mol%. An anomaly of character has been observed in all the properties of vanadyl doped glass systems, which gives a clear indication of mixed alkali effect.     

Structural and magnetic properties of self-assembled Sm-Co spherical aggregates

Self-assembled Sm-Co nanoparticles in the form of spherical aggregates (referred as nanospheres) with diameter ranging from 50 to 180 nm were achieved by means of polyol technique. The size distribution of the Sm-Co nanospheres can be regulated close to ∼100 nm by controlling the molar ratio of Sm:Co precursor. The spherical aggregates exhibited Sm₂Co₇ phase as a major constituent; while the aggregates obtained at higher Co concentration showed co-existence of Co-phase with Sm₂Co₇ phase. Upon annealing, the biphasic nature of nanospheres (Sm₂Co₇/Co) transformed into Sm₂Co₁₇ structure. By varying the Sm:Co precursor ratio from 1:5 to 1:9, the coercivity (H_c) and magnetization (M_s) values of the as-synthesized nanospheres can be tuned from 336 to 140 Oe and from 63.7 to 108 emu/g, respectively, and these values significantly improved after annealing. Maximum values of H_c (1050 Oe) at the Sm:Co molar ratio of 1:5 and M_s of 184.6 emu/g at the Sm:Co molar ratio of 1:9 were achieved in the annealed samples.     

Parameters optimization of selected casting processes using teaching–learning-based optimization algorithm

In the present work, mathematical models of three important casting processes are considered namely squeeze casting, continuous casting and die casting for the parameters optimization of respective processes. A recently developed advanced optimization algorithm named as teaching–learning-based optimization (TLBO) is used for the parameters optimization of these casting processes. Each process is described with a suitable example which involves respective process parameters. The mathematical model related to the squeeze casting is a multi-objective problem whereas the model related to the continuous casting is multi-objective multi-constrained problem and the problem related to the die casting is a single objective problem. The mathematical models which are considered in the present work were previously attempted by genetic algorithm and simulated annealing algorithms. However, attempt is made in the present work to minimize the computational efforts using the TLBO algorithm. Considerable improvements in results are obtained in all the cases and it is believed that a global optimum solution is achieved in the case of die casting process.     

Synthesis of mixed cyclotriveratrylenes

Cyclotriveratrylenes containing one benzene ring and two indole rings linked through N1 and C2 can be prepared by acid-catalysed reactions of formaldehyde and aryl aldehydes with 1,2-di-(1-indolylmethyl)benzene compounds.     

Observation of persistent photoconductivity in flower shaped PbS dendrite structures

We report the observation of persistent photoconductivity (PPC) in flower shaped PbS dendrites grown by the hydrothermal method. Potential fluctuations, due to the presence of various confinement regimes in the branches of dendrites, and surface traps, are likely responsible for the PPC observed here. We also observed photocurrent quenching and decreased dark current in the PPC below 40 K, due to the presence of a metastable state, whereas positive PPC was observed in the temperature region 40–220 K. Dark conductivity measurements, time constant parameters obtained from the stretched exponential fittings of PPC, also showed the metastable state related transition around 50 K.     

Line-bundle-valued ternary quadratic forms over schemes

We study degenerations of rank 3 quadratic forms and of rank 4 Azumaya algebras, and extend what is known for good forms and Azumaya algebras. By considering line-bundle-valued forms, we extend the theorem of Max-Albert Knus that the Witt-invariant—the even Clifford algebra of a form—suffices for classification. An algebra Zariski-locally the even Clifford algebra of a ternary form is so globally up to twisting by square roots of line bundles. The general, usual and special orthogonal groups of a form are determined in terms of automorphism groups of its Witt-invariant. Martin Kneser’s characteristic-free notion of semiregular form is used.     

Selective synthesis of sulfoxides from sulfides using ultrasound

The present work aims at developing a new process to selectively synthesize sulfoxide from sulfides using ultrasound. Methyl phenyl sulfide (MPS) has been taken as a model reactant. The reaction has been carried out in ultrasonic bath with an operating frequency of 22 kHz and maximum power supply of 120 W with an actual power dissipation of approximately 40 W measured using calorimetric studies. Effect of various parameters such as presence and absence of catalyst, type of catalyst (catalysts used were sodium tungstate and ammonium molybdate), temperature, concentration of hydrogen peroxide, effect of molar ratio of MPS to H(2)O(2) has been investigated with an aim of obtaining the optimum conditions for the synthesis of sulfoxides. It was observed that the presence of catalyst is a must to achieve appreciable conversions. It was also observed that the periodic addition of stoichiometric amount of hydrogen peroxide instead of sudden addition of it (total quantity of hydrogen peroxide remains the same) gave better selectivity for sulfoxide. The maximum conversion achieved in the present work was approximately 88.42% with sulfone formation being only 0.4% indicating a 99.6% selectivity for the desired product i.e. sulfoxides.