Bio-functionalization of cotton,silk, and leather using different in-situ silver nanoparticle synthesis modules,and their antibacterial properties

Research on Chemical Intermediates - We present a novel and in-situ strategy to synthesize silver nanoparticles (AgNPs) onto cotton, leather, and silk fabrics by three different methods: a green...     

Synthesis and structural and DNA binding studies of mono‐ and dinuclear copper(II) complexes constructed with ─O and ─N donor ligands: Potential anti‐skin cancer drugs

Mononuclear and dinuclear copper(II) complexes with thiophenecarboxylic acid, [Cu(3‐TCA)₂(2,2′‐bpy)] ( 1 ), [Cu(3‐Me‐2‐TCA)₂(H₂O)(2,2′‐bpy)] ( 2 ), [Cu(5‐Me‐2‐TCA)₂(H₂O)(2,2′‐bpy)] ( 3 ) and [Cu₂(2,5‐TDCA)(DMF)₂(H₂O)₂(2,2′‐bpy)₂](ClO₄)₂ ( 4 ) (where 3‐TCA = 3‐thiophenecarboxylic acid; 3‐Me‐2‐TCA = 3‐methyl‐2‐thiophenecarboxylic acid; 5‐Me‐2‐TCA = 5‐methyl‐2‐thiophenecarboxylic acid; 2,5‐TDCA = thiophene‐2,5‐dicarboxylic acid; 2,2′‐bpy = 2,2′‐bipyridyl; DMF = N,N‐dimethylformamide), were synthesized. Compounds 1 – 4 were extensively characterized using both analytical and spectroscopic methods. Additionally, the solid‐state structures of 1 and 4 were unambiguously established from single‐crystal X‐ray diffraction studies. The hexacoordinated Cu(II) centre in 1 (CuO₄N₂) is a distorted octahedral geometry whereas the pentacoodinated 4 (CuO₃N₂) has distorted square pyramidal geometry. Compounds 1 and 4 exhibit intermolecular hydrogen bonding which leads to the formation of two‐ and three‐dimensional supramolecular architectures, respectively. Spectrophotometric and computational investigations suggest that these compounds bind with DNA in minor groove binding such that K_b = 4.9 × 10⁵ M^?1 and K_sv = 3.4 × 10⁵ M^?1, and binding score of ?5.26 kcal mol^?1. The binding affinity of these complexes to calf thymus DNA is in the order 2 > 3 > 4 > 1 . Methyl‐substituted thiophene ring increases the DNA binding affinity whereas unsubstituted thiophene ring DNA binding rate is reduced. The methyl group on the thiophene ring would sterically hinder π–π stacking of the ring with DNA base pairs, and subsequently they are involved in hydrophobic interaction with the DNA surface rather than partial intercalative interaction. Compounds 1 – 4 show pronounced activity against B16 mouse melanoma skin cancer cell lines as measured by MTT assay yielding IC₅₀ values in the micromolar concentration range. The compounds could prove to be efficient anti‐cancer agents, since at a concentration as low as 2.1 μg ml^?1 they exerted a significant cytotoxic effect in cancer cells whereas cell viability was not affected in normal cells.     

Tunable passively Q-switched ytterbium-doped fiber laser using MoWS2/rGO nanocomposite saturable absorber

We demonstrated a tunable Q-switched ytterbium-doped fiber laser (YDFL) using MoWS₂/rGO nanocomposite as passive saturable absorber. Further, the Mo_1?xW_xS₂/rGO nanosheets, with x proportion of 0.2, are synthesized using hydrothermal exfoliation technique. The proposed nanocomposite-PVA based thin film is fabricated by mixing the MoWS₂/rGO nanosheets with polyvinyl alcohol (PVA). The fabricated thin film is sandwiched between two fiber ferrules to realize the proposed saturable absorber (SA). Further, the proposed MoWS₂/rGO-PVA based thin film SA exhibits a fast relaxation time and a high damage threshold which are suitable to realize a Q-switched pulsed laser with a tunable wavelength range of 10?nm that extends from 1028?nm to 1038?nm. For the highest pump power of 267.4?mW, the generated Q-switched pulses exhibit a narrow pulse width of 1.22 μs, the pulse repetition rate of 90.4?kHz, the highest pulse energy of 2.13?nJ and its corresponding average power of 0.193?mW. To the best of author’s knowledge, this is the first realization of a tunable Q-switching fiber laser in a 1?μm wavelength using MoWS₂/rGO nanocomposite saturable absorber.     

Non-Heme-Iron-Mediated Selective Halogenation of Unactivated Carbon−Hydrogen Bonds

Oxidation of the iron(II) precursor [(L¹)Fe^IICl₂], where L¹ is a tetradentate bispidine, with soluble iodosylbenzene (^sPhIO) leads to the extremely reactive ferryl oxidant [(L¹)(Cl)Fe^IV=O]⁺ with a cis disposition of the chlorido and oxido coligands, as observed in non-heme halogenase enzymes. Experimental data indicate that, with cyclohexane as substrate, there is selective formation of chlorocyclohexane, the halogenation being initiated by C−H abstraction and the result of a rebound of the ensuing radical to an iron-bound Cl⁻. The time-resolved formation of the halogenation product indicates that this primarily results from ^sPhIO oxidation of an initially formed oxido-bridged diiron(III) resting state. The high yield of up to >70 % (stoichiometric reaction) as well as the differing reactivities of free Fe²⁺ and Fe³⁺ in comparison with [(L¹)Fe^IICl₂] indicate a high complex stability of the bispidine-iron complexes. DFT analysis shows that, due to a large driving force and small triplet-quintet gap, [(L¹)(Cl)Fe^IV=O]⁺ is the most reactive small-molecule halogenase model, that the Fe^III/radical rebound intermediate has a relatively long lifetime (as supported by experimentally observed cage escape), and that this intermediate has, as observed experimentally, a lower energy barrier to the halogenation than the hydroxylation product; this is shown to primarily be due to steric effects.     

Characterization and Reactivity of a Tetrahedral Copper(II) Alkylperoxido Complex

A tetrahedral Cu^II alkylperoxido complex [Cu^II(TMG₃tach)(OOCm)]⁺ ( 1^OOCm ) (TMG₃tach={2,2′,2′′-[(1s,3s,5s)-cyclohexane-1,3,5-triyl]tris-(1,1,3,3-tetramethyl guanidine)}, OOCm=cumyl peroxide) is prepared and characterized by UV/Vis, cold-spray ionization mass spectroscopy (CSI-MS), resonance Raman, and EPR spectroscopic methods. Product analysis of the self-decomposition reaction of 1^OOCm in acetonitrile (MeCN) indicates that the reaction involves O−O bond homolytic cleavage of the peroxide moiety with concomitant C−H bond activation of the solvent molecule. When an external substrate such as 1,4-cyclohexadiene (CHD) is added, the O−O bond homolysis leads to C−H activation of the substrate. Furthermore, the reaction of 1^OOCm with 2,6-di-tert-butylphenol derivatives produces the corresponding phenoxyl radical species (ArO^.) together with a Cu^I complex through a concerted proton-electron transfer (CPET) mechanism. Details of the reaction mechanisms are explored by DFT calculations.     

Use of iterative OASIS with low resolution SAD laboratory X-ray source (Cr Kα) data sets

Anomalous scattering methods are widely used for phasing macromolecular structures. OASIS program works on a direct methods procedure and is used to break the phase ambiguity intrinsic in a single wavelength anomalous diffraction (SAD) experiment. An iterative phasing/model-building procedure for processing SAD data includes the initial direct method phasing of SAD data, density modification, automatic model building and direct methods phasing of SAD data with feed back from partial structure information. This dual-space procedure has been tested on two experimental Cr Kα SAD data sets, 2.3 ? for S-SAD and 2.4 ? for I-SAD, of an enzyme glucose isomerase with an approximate molecular weight of 44 kDa (388 residues). HYSS in PHENIX was used to locate the anomalous scatterers for both the data sets (11 sulfurs for 2.3 ? data and 9 iodines for 2.4 ? data). Phasing and density modification were carried out using OASIS, DM and model building was then carried out using ARP/wARP. Two iterative cycles were necessary for the successful structure solution and refinement of the 2.3 ? data set which built 384 residues out of 388. Regular ARP/wARP failed for the 2.4 ? resolution data and hence the modified version of REFMAC5 was used in ARP/wARP. A successful model could be built after three iterative cycles of OASIS using this modified version which built 382 residues out of 388 residues. Minimal manual model building was required at this stage and the structure determination was completed using regular REFMAC5. All the computations mentioned here were carried out using Pentium IV PC.     

Synthesis, crystal structure, magnetic, DSS cell, lifetime measurement, electrochemical, catecholase activity, and antimicrobial studies of mono and hetero binuclear cryptates

Mono and hetero binuclear cryptates, [GdML(DMF)] [M = VO(IV), Co(II), Cu(II)], were synthesized. The ligand L represents the deprotonated anionic cryptate obtained by the 2+3 condensation of tris-(2-aminoethyl)amine with 2,6-diformyl-4-methylphenol. The crystal structure of [GdL(NO₃)](NO₃)₂·H₂O was determined by single-crystal X-ray diffraction method. The magnetic susceptibility of the complexes was measured by SQUID. The Gd(III)Cu(II) cryptate has ferromagnetic interaction and [Gd(III)VO(IV)] cryptate has weaker intramolecular antiferromagnetic interaction. Fluorescence intensity and excited state lifetime of the cryptates increase in the following order: [GdCoL] < [GdVOL] < [GdL] < [GdCuL]. The efficiency (η) of cryptate based dye-sensitized solar cell increases in the following order: [GdL] < [GdVOL] < [GdCoL] < [GdCuL]. The reduction potential values of [Gd(M)L] M = VO(IV), Co(II), Cu(II) complexes are in the following order: Cu(II) > Co(II) > VO(IV). The catecholase activity of binuclear [GdML] complexes are relatively high compared with the mononuclear [Gd(III)L] complex in the following order: [GdL] < [GdVOL] < [GdCoL] < [GdCuL]. The antimicrobial activity of the binuclear complex Gd(III)Cu(II) is relatively higher than the mononuclear and other binuclear complexes.