液体闪烁计数法测定生物塑料中生物基含量

研究并建立了液体闪烁计数法测量生物塑料中生物基含量。首先将生物塑料样品充分燃烧,通过碳的转移与固定,最终催化合成液态苯。通过液体闪烁计数器对液体苯中的放射性核素14C衰变进行计数,从而计算生物塑料样品中生物基的含量。生物塑料样品加标回收率为98.5%~101%,相对标准偏差为0.2%。方法可用于生物塑料中生物基含量检测。     

计及相变微结构演化的形状记忆合金本构描述

基于对NiTi形状记忆合金的实验观察及有限元分析,考虑两相间的应变不协调关系,采用应变修正法建立了计及片层状微结构的本构模型,本模型考虑了两相间的相互约束,及其约束随微结构演化的变化规律.研究了NiTi形状记忆合金微圆管在拉伸和扭转下的响应特性.计算结果与实验结果的对比表明所建本构模型较好地描述了伪弹性响应尤其是较好地描述了拉伸实验过程中的应力跌落现象.     

带裂纹的椭圆孔口问题的应力分析

断裂现象与材料和结构中的孔洞、缺口或裂纹等缺陷密切相关,这是因为缺陷附近的应力集中明显.该文利用复变方法,通过保角映射研究了带裂纹的椭圆孔洞的平面弹性问题,给出了应力强度因子的解析解.并由此计算了两互相垂直的裂纹问题.     

超疏水涂膜的研究进展

超疏水涂膜以其独特的性能,在国防、工农业生产和日常生活中有着广泛的应用前景。但目前的制备技术制约了其在建筑外墙涂料等大型设施方面的应用。探索如何采用简单有效的方法构造和调控涂膜的双微观结构,从而获得性能持久优异的超疏水性涂膜,并有效应用于生产和生活的各个方面是这一领域研究的最终目标。本文就超疏水材料表面理论的发展和近几年来超疏水膜制备技术取得的新成果进行了概括,并指出制备超疏水涂膜存在的问题和发展方向。利用表面能极低的含氟材料,将溶胶－凝胶、相分离技术和自组装梯度功能等技术有机结合,获得适宜的表面粗糙度和微观构造,是实现超疏水涂膜工业化生产的可行途径。     

电喷雾串联质谱分析附子炮制中的化学成分变化

利用电喷雾质谱方法(ESI-MS)分析了附子加辅料(甘草)炮制前后水煎液中二萜类生物碱在种类和含量方面的变化,通过加入内标化合物,建立了电喷雾质谱的半定量分析方法。此方法具有快速、准确、灵敏的特点,能够更加全面地反映中药配伍炮制过程中多种化学成分的含量变化,并能根据电喷雾串联质谱的分析结果鉴定配伍后产生的新的化学成分,在共煎液中的次乌头碱、中乌头碱和乌头碱的相对含量分别是单煎液中的5.67%、4.05%和4.88%。通过研究附子与甘草的单煎液、共煎液以及药渣中化学成分的变化,揭示了甘草作为辅料,在炮制过程中对附子减毒作用机理。     

耐硫催化剂上合成混合醇的研究

通过改进制备方法和添加助剂，用浸渍－热分解法制得了具有高活性和高选择性的MoS2-K-C型耐硫低碳混合醇催化剂。在8.0-11.0MPa,290-340℃，6000-12000h^-1,H2 S 浓度为100ppm 左右的条件下，在直流反应器中对催化剂进行了性能测试，结果表明，醇得率为0.14-0.47gROH(gcat·h)^-1，选择性为89-98%。同时，考察了操作条件对催化剂性能的影响。1042h的试验，证明催化剂具有很好的稳定性。     

铁催化2-烯基氮杂芳烃的绿色合成

以廉价、低毒的醋酸亚铁为催化剂,在三氟乙酸助催化下,2-甲基氮杂芳烃与芳香醛经过加成与脱水反应,直接选择性合成具有生物活性的反式2-烯基氮杂芳烃化合物,水是唯一副产物.该合成方法催化剂用量少,后处理方便,产率高,选择性高,底物适用范围广.治疗哮喘药顺尔丁中间体(E)-3-[2-(7-氯-2-喹啉基)乙烯基]苯甲醛(3v)的克级合成展现了该方法的应用前景.     

In-line pressurized-fluid extraction-solid-phase extraction for determining phenolic compounds in grapes

A procedure to determine 3-alkyl-2-methoxypyrazines in wines is described. It is based on the headspace solid-phase microextraction (HS-SPME) technique after a clean-up of the sample by distillation (previously acidified to pH 0.5) to remove ethanol and other volatile compounds that can interfere in the SPME. Determination is performed by means of capillary gas chromatography using a nitrogen-phosphorus detector. The method allows quantification of 3-isobutyl-2-methoxypyrazine, 3-sec-butyl-2-methoxypyrazine and 3-isopropyl-2-methoxypyrazine at their natural concentration levels and below their sensory thresholds in Cabernet Sauvignon and Merlot wines. The method was successfully applied to experimental red wines and the evolution of their pyrazine contents during the winemaking process was monitored. Pyrazine content increased during the first maceration day but did not change significantly during alcoholic and malolactic fermentation. Final contents in wines were 12-27 ng/l of 3-isobutyl-2-methoxypyrazine and 5-10 ng/l of 3-sec-butyl-2-methoxypyrazine.     

New Penta(tetrathiafulvalenyl)[60]fullerenes for Supramolecular Materials

New penta(organo)fullerenes donor–acceptor systems bearing five tetrathiafulvalene recognition units have been synthesized to promote self‐assemblies similar in appearance to shuttlecocks nested into each other thanks to the conical host cavity created around the fullerene together with the π–π and electronic interactions.     

Passive infrared detector used for detection of very slowly moving of crawling people

The paper presents construction and principle of operation of passive IR detectors (PIR detectors) of a large detection range. Important virtue of these detectors is highly efficient detection of slowly moving or crawling people. The described here PIR detector detects crawling people at the distance of 140 m. To ensure high probability of detection of slowly moving objects, new method of signals analysis was applied. On the basis of the carried out real-time measurements, both probability of detection and false alarms were determined.