UV spectrophotometric determination of bioflavonoids from a semisolid pharmaceutical dosage form containing Trichilia catigua Adr. Juss and Ptychopetalum olacoides Bentham standardized extract: analytical method validation and statistical procedures

A precise, accurate, and sensitive UV spectrophotometric method was developed and validated for routine quantification of total bioflavonoids, expressed as rutin, from a topical oil-in-water pharmaceutical emulsion containing the extract of Trichilia catigua Adr. Juss and Ptychopetalum olacoides Bentham. The method was validated experimentally, and the data were treated rigorously by statistical analysis. The following analytical parameters were assessed: linearity, specificity, intra- and interrun precision measured as relative standard deviation (RSD, %), intra- and interrun accuracy (E, %), recovery (Rec., %), limit of detection (LOD, microg/mL), and limit of quantification (LOQ, microg/mL). The UV spectrophotometric method was linear (r = 0.9995) for standard rutin over the concentration range of 5.0-15.0 microg/mL with specificity for total bioflavonoids (expressed as rutin) at 361.0 nm with an absence of interferents from the complex matrix; RSD of < or = 1.79%, intrarun (E = 97.88 +/- 1.75 to 99.0 +/- 0.33%) and interrun (E = 98.38 +/- 1.12 to 100.79 +/- 1.30%) accuracy; Rec. = 98.64 +/- 0.42 to 100.74 +/- 0.41%; LOD = 0.20 microg/mL; and LOQ = 0.30 microg/mL.     

Ferrocene-based ureas as multisignaling receptors for anions

The synthesis of structurally new types of ferrocene-based ureas, in which the ferrocene moiety is simultaneously attached to two urea groups, have been prepared directly from 1,1'-bis(isocyanato)ferrocene 1. Homoditopic receptors 2a-e show spectral and electrochemical anion-sensing action: they display a selective downfield shift of the urea protons and a cathodic shift of the ferrocene/ferrocinium redox couple with hydrogen phosphate and fluoride anions. In addition, receptor 2d based on an unprecedent tetraaza[9]ferrocenophane architecture, shows spectral, electrochemical, and selective fluorescent responses to fluoride anion.     

Density functional theory of fluids in nanopores: analysis of the fundamental measures theory in extreme dimensional-crossover situations

Two density functional theories, the fundamental measures theory of Rosenfeld [Phys. Rev. Lett. 63, 980 (1989)] and a subsequent approximation by Tarazona [Phys. Rev. Lett. 84, 694 (2000)] are applied to the study of the hard-sphere fluid in two situations: the cylindrical pore and the spherical cavity. The results are compared with those obtained with grand canonical ensemble Monte Carlo simulations. The differences between both theories are evaluated and interpreted in the terms of the dimensional crossover from three to one and zero dimensions.     

A survey on Cox rings

We survey the construction of the Cox ring of an algebraic variety X and study the birational geometry of X when its Cox ring is finitely generated. Basic notation. Throughout this paper k is an algebraically closed field.     

PROMOTIONAL EFFECT OF Sn ON NO OXIDATION OVER Pt/Al2O3 AS PROMISING GAS EXHAUST CATALYTIC CONVERTER. SELECTIVE Pt AND Sn DISPERSION DETERMINATION

NO oxidation was investigated over Pt-Sn/g-Al₂O₃. The addition of Sn to 1%Pt/g-Al₂O₃ enhances NO oxidation to NO₂. This effect is related to the enhancement of chemisorbed oxygen on the metallic surface produced by Sn.     

Synthesis of melampolides and cis,cis-germacranolides as natural herbicide models

The comparative study between the theoretical molecular properties of the starting materials and the yields in the transformation of melampolides to cis,cis-germacranolides using SeO₂/t-BuOOH (TBHP) as oxidant allows to establish a feasible relationship with their values of dipolar moment. Conditions for this transformation are optimized and some mechanistic considerations are made based in this finding. Cluster analysis of the phytotoxic activity of the melampolides and cis,cis-germacranolides obtained shows that the activity is greatly influenced by the spatial shape of the backbone, prevailing upon other factors such as the presence of reactive functional groups.     

Borides and vitreous compounds sintered as high-energy fuels

Boron was chosen as fuel in view of its excellent thermodynamic values for combustion, as compared to traditional fuels. The problem of the boron in combustion is the formation of a surface layer of oxide, which delays the ignition process, reducing the performance of the rocket engine. This paper presents a high-energy fuel for rocket engines. It is composed of sintered boron (borides and carbides and vitreous compounds) with a reducing chemical agent. Borides and boron carbide were prepared since the combustion heat of the latter is similar to that of the amorphous boron (in: K.K. Kuo (Ed.), Boron-Based Solid Propellant and Solid Fuel, Vol. 427, CRC Press, Boca Raton, FL, 1993). Several chemical reducing elements were used, such as aluminum, magnesium, and coke. As the raw material for boron, different compounds were used: amorphous boron, boric acid and boron oxide.     

Rapid mutation detection in complex genes by heteroduplex analysis with capillary array electrophoresis

Mutational analysis of large multiexon genes without prevalent mutations is a laborious undertaking that requires the use of a high-throughput scanning technique. The Human Genome Project has enabled the development of powerful techniques for mutation detection in large multiexon genes. We have transferred heteroduplex analysis (HA) by conformation-sensitive gel electrophoresis of the two major breast cancer (BC) predisposing genes, BRCA1 and BRCA2, to a multicapillary DNA sequencer in order to increase the throughput of this technique. This new method that we have called heteroduplex analysis by capillary array electrophoresis (HA-CAE) is based on the use of multiplex-polymerase chain reaction (PCR), different fluorescent labels and HA in a 16-capillary DNA sequencer. To date, a total of 114 different DNA sequence variants (19 insertions/deletions and 95 single-nucleotide substitutions - SNS) of BRCA1 and BRCA2 from 431 unrelated BC families have been successfully detected by HA-CAE. In addition, we have optimized the multiplex-PCR conditions for the colorectal cancer genes MLH1 and MSH2 in order to analyze them by HA-CAE. Both genes have been amplified in 13 multiplex groups, which contain the 35 exons, and their corresponding flanking intronic sequences. MLH1 and MSH2 have been analyzed in nine hereditary nonpolyposis colorectal cancer patients, and we have found six different DNA changes: one complex deletion/insertion mutation in MLH1 exon 19 and another five SNS. Only the complex mutation and one SNS may be classified as cancer-prone mutations. Our experience has revealed that HA-CAE is a simple, fast, reproducible and sensitive method to scan the sequences of complex genes.     

Mass spectrometric study of tricarbonyl (eta(6)-phenyl methanols) of chromium(0)

A mass spectrometric study of several tricarbonyl (eta(6)-phenyl methanols) of chromium(0) was performed. Electron ionization (EI), chemical ionization (CI) and fast atom bombardment (FAB) mass spectra were acquired for each molecule, and compared in order to establish a general fragmentation pattern. The suggested pathways were investigated and confirmed by means of constant b/e linked scans and high resolution data. In addition a Hammett-McLafferty correlation for some peaks derived from the molecular ions was accomplished.     

Structural and mechanical studies on modified reused tyres composites

Reused tyres powder was used as reinforcement in HDPE-reused tyre composites. In order to improve the compatibility between both components, several pre-treatments performed over the rubber tyres were applied: sulphuric acid etching, use of a silane coupling agent and chlorination with trichloroisocyanuric acid (TCI). Mechanical properties of the resulting materials (e.g. tensile strength, Young’s Modulus, toughness and elongation at break) were studied and compared. Chemical modifications on the surface of reused tyres were monitored by FTIR and physical modifications and behaviour to fracture were followed by means of SEM. The influence of rubber pre-treatment was assessed by comparing the results of treated and untreated composites with those for neat HDPE. Reused tyre rubber, added to the HDPE in small quantities, acts as a filler, improving the stiffness and providing a more brittle behaviour. Pre-treatment with TCI gave poor results in terms of mechanical properties obtaining lower values than neat HDPE in some cases and always worst properties than sulphuric or silane coupling agent. Treatments with H₂SO₄ and silane coupling agent improve the ability of rubber to interact with the HDPE, increasing the material’s stiffness and its tensile strength. Sulphuric acid modificates chemical and physically the particles’ surface improving mainly mechanical adhesion, whereas silane acts as a compatibilizer developing chemical matrix-reinforcement interactions.