A light detection cell to be used in a micro analysis system for ammonia

This paper describes the design, realization and characterization of a micromachined light detection cell. This light detection cell is designed to meet the specifications needed for a micro total analysis system in which ammonia is converted to indophenol blue. The concentration of indophenol blue is measured in a light detection cell. The light detection cell was created using KOH/IPA etching of silicon. The KOH/IPA etchant was a 31 wt.% potassium hydroxide (KOH) solution with 250 ml isopropyl alcohol (IPA) per 1000 ml H(2)O added to it. The temperature of the solution was 50 degrees C. Etching with KOH/IPA results in 45 degrees sidewalls ({110} planes) which can be used for the in- and outcoupling of the light. The internal volume of the realized light detection cell is smaller than 1 mul, enabling measurements on samples in the order of only 1 mul. Measurements were performed on indophenol blue samples in the range of 0.02 to 50 muM. In this range the measurements showed good reproducibility.     

The use of sulfines in nucleophilic acylation reactions

The thiophilic addition of MeLi and BuLi to aromatic alkylthio- and arylthio sulfines has been studied. The resulting dithioacetal monoxides are isolated in high yields. Reactions of MeLi with aromatic arylsulphinyland arylsulfonyl sulfines give the corresponding dithioacetal di- and trioxidcs. Acid treatment of dithioacetal monoxides results in aromatic aldehydes. The nucleophilic acylation of the acylanion equivalents obtained from sulfines is investigated. Alkylation of the dithioacetal monoxide anions, prepared in situ from MeLi and sulflnes of the type Ar(RS)CSO. with primary alkyl halides leads to dithioketal monoxide which upon acidolysis under anhydrous conditions are converted into vinylsulfides. The mechanism of the formation of the vinyl sulfides is discussed. The acylanion equivalents are acylated with benzoylchloride, CO₂ and benzaldehyde. The use of Cu¹ and 18-crown-6 as a catalyst appears to be crucial in some reactions. Michael additions of the dithioacetal monoxides to acrylonitrile are described.     

Direct ampholyte-free liquid-phase isoelectric peptide focusing: application to the human serum proteome

In this study, we utilized a multidimensional peptide separation strategy combined with tandem mass spectrometry (MS/MS) for the identification of proteins in human serum. After enzymatically digesting serum with trypsin, the peptides were fractionated using liquid-phase isoelectric focusing (IEF) in a novel ampholyte-free format. Twenty IEF fractions were collected and analyzed by reversed-phase microcapillary liquid chromatography (microLC)-MS/MS. Bioinformatic analysis of the raw MS/MS spectra resulted in the identification of 844 unique peptides, corresponding to 437 proteins. This study demonstrates the efficacy of ampholyte-free peptide autofocusing, which alleviates peptide losses in ampholyte removal strategies. The results show that the separation strategy is effective for high-throughput characterization of proteins from complex proteomic mixtures.     

Microphase separation and rheology of a semicrystalline poly(ether-ester) multiblock copolymer

A microphase separation transition (MST) of a thermoplastic elastomer based on soft segments of poly(tetra methylene oxide) and hard crystalline segments of poly(tetra methylene terephthalate) has been studied by means of rheological measurements, differential scanning calorimetry (DSC), and wide-angle X-ray scattering (WAXS), showing that the MST is entirely caused by melting/crystallization, and that no separate segmental mixing/demixing transition is involved. DSC and WAXS measurements show that melting starts at 190°C, leading to crystal reorganization effects up to above 200°C, and that a gradual decrease in crystallinity occurs from below 210°C up to 224°C, above which temperature no crystals are left. Rheological measurements reveal a wide MST (207–224°C) upon heating, which coincides perfectly with the melting range. From this coincidence together with the Maxwell fluid behavior directly following the MST, it is concluded that melting leads to a one-phase liquid, and that no separate segmental mixing transition occurs. Similar results are obtained upon cooling, indicating that crystallization is the driving force for phase separation and that no separate segmental demixing step precedes crystallization. The wide MST implies a large processing window over which the rheological properties change from highly elastic, with a distinct yield stress, to normal pseudoplastic, enabling application in preparation of structured blends. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1795–1804, 1998     

Photonic materials for electroluminescent,laser and photovoltaic devices

This article presents an overview of the work that has been done recently in our laboratory concerning the development and application of new conjugated materials with tunable properties. We have designed polymers containing oligo(phenylenevinylene)-type conjugated segments of well defined size and structure isolated either in their main-chain or in the side-chains. Model oligomers corresponding to the conjugated parts of the polymers have also been studied. We show how these materials perform in light-emission applications (light-emitting diodes, lasers) or photovoltaic cells.     

The photocurrent response of human cones is fast and monophasic

Background  

The precise form of the light response of human cone photoreceptors in vivo has not been established with certainty. To investigate the response shape we compare the predictions of a recent model of transduction in primate cone photoreceptors with measurements extracted from human cones using the paired-flash electroretinogram method. As a check, we also compare the predictions with previous single-cell measurements of ground squirrel cone responses.     

Multiplexed quantitation of endogenous estrogens and estrogen metabolites in human peritoneal fluid

Endogenous estrogens and estrogen metabolites (EM) in human peritoneal fluid may play an important role in health and disease, yet little is known regarding their types and levels present in human peritoneal fluid, primarily due to the lack of an analytical method that is capable of directly quantifying their absolute abundances. In this report, we describe the application of a capillary LC-MS/MS method for identifying and quantifying biologically active and total endogenous EM in human peritoneal fluid. The method requires only 50 muL of peritoneal fluid, yet can quantify 13 distinct EM. Calibration curves for each EM were linear over a 10(3)-fold concentration range and the lower LOQ was 50 fg on-column. For a charcoal stripped human peritoneal fluid sample containing 10 pg/mL of each EM, accuracy ranged from 83 to 118%, and intrabatch precision ranged from 0.2 to 4.4% RSD and interbatch precision ranged from 5.5 to 15.5% RSD. The analyses of human female peritoneal fluid shows that at least 10 biologically active and 11 total endogenous EM can be positively identified and quantitatively measured. Many of the biologically active forms are present in high abundance and possess distinct biological activities which warrant further study. Although micellar EKC gave baseline separation of a standard mixture of 10 EM, the LOQs using UV detection were not suitable for the assay of the low level estrogens in biological samples.