Marine sponge melanin: a new source of an old biopolymer

Various types of melanin have already been found in the majority of organisms, being this biopolymer considered as one of the major pigments present in nature. The presence of this pigment in marine sponges (Phylum Porifera, one of the simplest multicellular organisms) was postulated, but never characterized. In this context this work aims the extraction and characterization of a dark pigment observed in four different marine sponges species (Erylus mamillaris, Erylus discophorus var. deficiens, Pachymatisma johnstonia, Dercitus bucklandi). Characterization of the extracted biopolymer was performed using solid state analytical techniques, due to the characteristic non-solubility of melanin. Therefore, characterization techniques like SEM–EDS, IR, UV–vis, MALDI-MS, elemental analysis and X-ray powder diffraction (XRD) were used to identify the biopolymer. The results showed that the extracted material was obtained with high purity, being identified as melanin. The results also emphasize a large structure variability present in this pigment, showing different structure arrangements and composition depending on its source, which influences the UV behaviour. The structural characterization of this class of pigments is fundamental, allowing a better understanding of melanin properties.     

Magnetic Mn and Co complexes with a large polycyclic aromatic substituted nitronylnitroxide

2-(1'-Pyrenyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-3-oxide-1-oxyl (PyrNN) was reacted with M(hfac)(2) (M = Mn(II) and Co(II), hfac = hexafluoracetylacetonate) to give two isostructural ML(2) stoichiometry M(hfac)(2)(PyrNN)(2) complexes and a ML stoichiometry one-dimensional (1-D) polymer chain complex [Mn(hfac)(2)(PyrNN)]. The ML(2) complexes have similar crystal structures with monoclinic unit cells, in which one NO unit from each PyrNN ligand is bonded to the transition metal on cis vertices of a distorted octahedron. The major magnetic interactions are intracomplex metal-to-radical exchange (J), and intermolecular exchange across a close contact between the uncoordinated NO units (J'). For M = Mn(II) an approximate chain model fit gives g = 2.0, J = (-)125 cm(-1) and J' = (-)49 cm(-1); for M = Co(II), g = 2.4, J = (-)180 cm(-1), and J' = (-)70 cm(-1). Hybrid density functional theory (DFT) computations modeling the intermolecular exchange by using only the radical units across the close contact are in good accord with the estimated values of J'. The chain type complex structure shows solvent incorporation for overall structure [Mn(hfac)(2)(PyrNN)](n)·0.5(CHCl(3))·0.5(C(7)H(16)). Both NO groups of the PyrNN ligand are complexed to form helical chains, with very strong metal to radical antiferromagnetic exchange that gives overall ferrimagnetic behavior.     

Controlled delivery achieved with bi-layer matrix devices produced by co-injection moulding

The aim of this study was to design new soy protein-based bi-layered co-injection moulded matrix systems aimed to achieve controlled drug delivery. The devices consisted of a drug-free outer layer (skin) and a drug-containing core. The systems overcame the inherent disadvantage of non-linear release associated with diffusion-controlled single-layer matrix devices by providing additional releasing area with time to compensate for the decreasing release rate. As expected, the bi-layer devices presented a significant decrease in drug release rate when compared with a correspondent single layer matrix system. The skin thickness and the degree of crosslinking of the core appeared to be very important tools to tailor the release patterns. Furthermore, due to the amphoteric nature of the soy protein, the developed devices evidenced a pH-dependent behaviour. The mechanisms of drug release were also elucidated at two different pH values: i) pH 5.0, near the isoelectric point of soy (low matrix solubility); and ii) pH 7.4, physiological pH (high matrix solubility). Consequently, changing the release medium from pH 5.0 to pH 7.4 after two hours, led to an abrupt increase in drug release and the devices presented a typical controlled drug delivery profile: slow release/fast release. These evidences may provide for the development of individual systems with different release onsets that in combination may exhibit drug releases at predetermined times in a pre-programmed way. Another possibility is the production of three-layer devices presenting bimodal release profiles (fast release/slow release/fast release) by similar technologies. Scanning electron micrograph of a developed bi-layer device.     

The use of 18O‐exchange and base‐catalyzed N‐dealkylation with liquid chromatography/tandem mass spectrometry to identify carbinolamide metabolites

Oxidation of N‐alkyl‐substituted amides is a common transformation observed in metabolism studies of drugs and other chemicals. Metabolism at the alpha carbon atom can produce stable carbinolamide compounds, which may be abundant enough to require complete confidence in structural assignments. In a drug discovery setting, rapid structural elucidation of test compounds is critical to inform the compound selection process. Traditional approaches to the analysis of carbinolamides have relied upon the time‐consuming synthesis of authentic standards or purification of large enough quantities for characterization by nuclear magnetic resonance (NMR). We describe a simple technique used in conjunction with liquid chromatography/tandem mass spectrometry (LC/MS/MS) which demonstrates the chemical identity of a carbinolamide by its distinctive ability to reversibly exchange [¹⁸O]water through an imine intermediate. A key advantage of the technique is that the chromatographic retention times of metabolites are preserved, allowing direct comparisons of mass chromatograms from non‐treated and [¹⁸O]water‐treated samples. Metabolites susceptible to the treatment are clearly indicated by the addition of 2 mass units to their original mass. An additional test which can be used in conjunction with ¹⁸O‐exchange is base‐catalyzed N‐dealkylation of N‐(α‐hydroxy)alkyl compounds. The use of the technique is described for carbinolamide metabolites of dirlotapide, loperamide, and a proprietary compound. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis,Crystal Structure and Magnetic Properties of a Novel Heterobimetallic Rhenium(IV)–Dysprosium(III) Chain

The use of the mononuclear rhenium(IV) precursor [ReBr₅(H₂pydc)]^? (H₂pydc=3,5‐pyridinedicarboxylic acid) as a metalloligand towards dysprosium(III) afforded the first heterobimetallic Re^IV–Dy^III complex. Crystal structures and static and dynamic magnetic properties of both rhenium‐containing species are reported herein. The 5d–4f compound shows an extended 1D structure and the AC magnetic measurements reveal frequency dependence at low temperature suggesting slow relaxation of the magnetization.     

A Solid Film Electrode of Intermetallic Ag2Hg3.02 for the Direct Determination of Folic Acid in Fresh and Processed Fruit Juices

AgSIE was used for the direct analysis of folic acid (FA), with a detection limit and lower level of quantitation of 6.8×10^?10 mol L^?1 and 2.3×10^?8 mol L^?1. The analysis in fresh and processed fruits was done without any sample pretreatment. In strawberry and acerola juices, FA concentration level values were below the method detection limit. FA was detectable in peach (77.7±0.4 µg L^?1 and 64.4±0.5 µg L^?1), Persian lime (45.4±0.7 µg L^?1), pineapple Hawaii (66.2±0.4 µg L^?1), pear pineapple (35.3±0.6 µg L^?1), cashew (54.4±0.5 µg L^?1), passion fruit (73.2±0.3 µg L^?1), and apple (84.4±0.5 µg L^?1).     

C-H...O hydrogen bonding in 4-phenyl-benzaldehyde: a comprehensive crystallographic, spectroscopic and computational study

The crystal structure of 4-phenyl-benzaldehyde reveals the presence of a dimer linked by the C=O and C9-H groups of adjacent molecules. In the liquid phase, the presence of C-H...O bonded forms is revealed by both vibrational and NMR spectroscopy. A DeltaH value of -8.2 +/- 0.5 kJ mol(-1) for the dimerisation equilibrium is established from the temperature-dependent intensities of the bands assigned to the carbonyl-stretching modes. The NMR data suggest the preferential engagement of the C(2,6)-H and C(10/12)/C(11)-H groups as hydrogen bond donors, instead of the C(9)-H group. While ab initio calculations for the isolated dimers are unable to corroborate these NMR results, the radial distribution functions obtained from molecular dynamics simulations show a preference for C(2,6)-H and C(10/12)/C(11)-H...O contacts relative to the C(9)-H...O ones.     

Square-wave voltametric method for determination of molinate concentration in a biological process using a hanging mercury drop electrode

A square-wave voltammetric (SWV) method using a hanging mercury drop electrode (HMDE) has been developed for determination of the herbicide molinate in a biodegradation process. The method is based on controlled adsorptive accumulation of molinate for 10 s at a potential of –0.8 V versus AgCl/Ag. An anodic peak, due to oxidation of the adsorbed pesticide, was observed in the cyclic voltammogram at ca. –0.320 V versus AgCl/Ag; a very small cathodic peak was also detected. The SWV calibration plot was established to be linear in the range 5.0×10^–6 to 9.0×10^–6 mol L^–1; this corresponded to a detection limit of 3.5×10^–8 mol L^–1. This electroanalytical method was used to monitor the decrease of molinate concentration in river waters along a biodegradation process using a bacterial mixed culture. The results achieved with this voltammetric method were compared with those obtained by use of a chromatographic method (HPLC–UV) and no significant statistical differences were observed.     

Chemical and Bioactive Characterization of the Essential Oils Obtained from Three Mediterranean Plants

Cupressus sempervirens L., Juniperus communis L. and Cistus ladanifer L. are Mediterranean arboreal and shrub species that possess essential oils (EO) in their leaves and branches. This study aimed at characterizing the EOs obtained by steam distillation from the three species collected in different locations from Spain (Almazán, Andévalo, Barriomartín, Cerezal, Ermitas and Huéscar). For this purpose, volatiles composition was determined by GC-MS, and different bioactivities were evaluated. The highest content in terpenes was observed in C. sempervirens (Huéscar origin) followed by J. communis (Almazán origin), corresponding to 92% and 91.9% of total compounds, respectively. With exception of C. ladanifer from Cerezal that presented viridiflorol as the most abundant compound, all the three species presented in common the α-pinene as the major compound. The EOs from C. ladanifer showed high antibacterial potential, presenting MIC values from 0.3 to 1.25 mg/mL. Concerning other bioactivities, C. ladanifer EO revealed an oxidation inhibition of 83%, while J. communis showed cytotoxicity in the MCF-7 cell line, and C. sempervirens and C. ladanifer EOs exhibited the highest potential on NCI-H460 cell lines. Nevertheless, some EOs revealed toxicity against non-tumoral cells but generally presented a GI₅₀ value higher than that of the tumor cell lines.     

Metallocenes for polypropylene: Polymerization performance and computer modeling

The structures of eleven different metallocenes substituted with either methyl and/or t-butyl groups were minimized by computer molecular modeling. Using Comparative Molecular Field Analysis (CoMFA), a computer model was generated from the minimized metallocene structures and actual polymerization performance. When the model was tested, a statistically valid correlation of the model's predicted DSC melting point with the observed DSC melting point was found. The model indicates the extent of the steric effect of these alkyl substituents and their influence on the DSC melting point.