Influence of drying processes on oxidative stability of ethyl corn biodiesel by differential scanning calorimetry

The influence of drying processes in the biodiesel oxidation was investigated by means of the oxidative induction time obtained from differential scanning calorimetry data. For this purpose, corn biodiesel was dried by different methods including: chemical (anhydrous sodium sulfate) and thermal (induction heating, heating under vacuum and with microwave irradiation). The drying efficiency was evaluated by monitoring IR absorption in the 3,500–3,200 cm⁻¹ range and by the AOCS Bc 2-49 method. In general, the oxidative induction times increased inversely to the heating degree, except that of microwave irradiation, which was selective to water evaporation and caused low impact over the unsaturation of biodiesel. The DSC technique was shown to be a powerful tool to evaluate with high level of differentiation the influence of the drying process on the oxidative stability of biodiesel.     

Analysis of anatoxin-a in biological samples using liquid chromatography with fluorescence detection after solid phase extraction and solid phase microextraction

Anatoxin-a is a naturally occurring, potent neurotoxin produced by some species of cyanobacteria in freshwaters. This toxin, which is a potential health hazard, especially to animals, has been determined in different biological matrices such as several cyanobacterial cultures and water samples and carps and mussels tissue using a sensitive High Performance Liquid Chromatography with Fluorescence detection method. Sonication was the technique selected for the extraction of intracellular anatoxin-a and solid phase extraction using weak cation exchange was used for the concentration and purification of the samples. 4-Fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) was used to convert anatoxin into a highly fluorescent derivative. Recovery experiments were performed for each type of matrix used in this work, and adequate values were obtained (71-87%). Limits of detection for anatoxin-a were estimated to be in the ng/L and ng/g level for water and cyanobacterial samples, respectively. The results obtained were also compared with those obtained after using solid phase microextraction, as an alternative for the extraction and purification of the samples. Advantages and disadvantages regarding to the efficiency for impurities removal, simplicity and rapidity and the potential for concentration enhancement of using both methodologies have been also discussed.     

Using near-infrared overtone regions to determine biodiesel content and adulteration of diesel/biodiesel blends with vegetable oils

This work evaluates the use of near-infrared (NIR) overtone regions to determine biodiesel content, as well potential adulteration with vegetable oil, in diesel/biodiesel blends. For this purpose, NIR spectra (12,000–6300 cm⁻¹) were obtained using three different optical path lengths: 10 mm, 20 mm and 50 mm. Two strategies of regression with variable selection were evaluated: partial least squares (PLS) with significant regression coefficients selected by Jack-Knife algorithm (PLS/JK) and multiple linear regression (MLR) with wavenumber selection by successive projections algorithm (MLR/SPA). For comparison, the results obtained by using PLS full-spectrum models are also presented. In addition, the performance of models using NIR (1.0 mm optical path length, 9000–4000 cm⁻¹) and MIR (UATR – universal attenuated total reflectance, 4000–650 cm⁻¹) spectral regions was also investigated. The results demonstrated the potential of overtone regions with MLR/SPA regression strategy to determine biodiesel content in diesel/biodiesel blends, considering the possible presence of raw oil as a contaminant. This strategy is simple, fast and uses a fewer number of spectral variables. Considering this, the overtone regions can be useful to develop low cost instruments for quality control of diesel/biodiesel blends, considering the lower cost of optical components for this spectral region.     

Thermo-oxidative evaluation of new cardol derivatives as antioxidants for mineral oils

In this study, the thermo-oxidative stability of two new phosphorylated derivatives of cardol, a compound from the cashew (Anacardium occidentale L.) industry waste CNSL (cashew nutshell liquid), were evaluated. The antioxidant capacity of these new molecules upon two mineral oils, NH10 and NH20 were also studied by thermogravimetric analysis (TG/DTG), observing the onset and offset temperatures variation. The results showed that both MP and DP Cardol increased considerably the onset and offset temperatures of NH10 and NH20 oils.     

Influence of polar groups on the wetting properties of vertically aligned multiwalled carbon nanotube surfaces

In this work, we have studied superhydrophilic and superhydrophobic transitions on the vertically aligned multiwalled carbon nanotube (VACNT) surfaces. As-grown, the VACNT surfaces were superhydrophobic. Pure oxygen plasma etching modified the VACNT surfaces to generate superhydrophilic behavior. Irradiating the superhydrophilic VACNT surfaces with a CO₂ laser (up to 50?kW?cm^?2) restored the superhydrophobicity to a level that depended on the laser intensity. Contact angle and surface energy measurements by the sessile drop method were used to examine the VACNT surface wetting. X-ray photoelectron spectroscopy (XPS) showed heavy grafting of the oxygen groups onto the VACNT surfaces after oxygen plasma etching and their gradual removal, which also depended on the CO₂ laser intensity. These results show the great influence of polar groups on the wetting behavior, with a strong correlation between the polar part of the surface energy and the oxygen content on the VACNT surfaces. In addition, the CO₂ laser treatment created an interesting cage-like structure that may be responsible for the permanent superhydrophobic behavior observed on these samples.     

Energetic potential of pyrolyzed biomass from different sources: a comparative study

Journal of Thermal Analysis and Calorimetry - The use of biomass has been a recent trend as a potential feedstock for char generation with improved energetic value. In this work, agricultural...     

Antibacterial activity of extract and fractions from branches of Protium spruceanum and cytotoxicity on fibroblasts

The crude ethanol extract (CEE) and fractions from branches of Protium spruceanum were subjected to antibacterial and cytotoxicity assays. Compounds of the most active fraction were identified by GC-MS and LC-MS. CEE was active against 19 bacteria and the ethyl acetate fraction (EAF) showed the lowest minimum bactericidal concentration (MBC 0.3–80.0 mg/mL). Through time-kill assay was observed that EAF induced rapid bactericidal effect against Staphylococcus saprophyticus. The cytotoxicity tests against L929 fibroblasts showed great potential of EAF on the treatment of infections caused by five bacteria (MBC < IC₅₀). The results provide in vitro scientific support to the possible application of branches of P. spruceanum as antimicrobial agent that may contribute for treatment of infections.