Characterization of molecular disorder in vapor-deposited thin films of aluminum tris(quinoline-8-olate) by one-dimensional 27Al NMR under magic angle spinning

Aluminum tris (quinoline-8-olate) (Alq3) is used as an electron-transport layer in organic light-emitting diodes. The material can be obtained in a wide range of different solid phases, both crystalline and amorphous, by deposition from the vapor phase or from solution under controlled conditions. While the structure of the crystalline polymorphs of Alq3 has been investigated thoroughly by x-ray diffraction as well as solid-state NMR, very little information is currently available on the amount of structural disorder in the amorphous forms of Alq3. In the present contribution, we report the use of 27Al NMR spectroscopy in the solid state under magic angle spinning to extract such information from amorphous vapor deposits of Alq3. The NMR spectra obtained from these samples exhibit different degrees of broadening, reflecting distributions of the electric-field gradient tensor at the site of the aluminum ion. These distributions can be obtained from the NMR spectra by solving the corresponding inverse problem. From these results, the magnitude of structural disorder in terms of molecular geometry has been estimated by density-functional theory calculations. It was found that the electric-field gradient anisotropy delta follows a bimodal distribution. Its majority component is centered around delta values comparable to the meridianal alpha crystal polymorph and has a width of about 10%, corresponding to distortions of the molecular geometry of a few degrees in the orientation of the ligands. Alq3 samples obtained at higher deposition rates exhibit higher degrees of disorder. The minor component, present at about 7%, has a much smaller anisotropy, suggesting that it may be due to the facial isomer of Alq3.     

Chemical diversity and anti-proliferative activity of marine algae

The chemical diversity of three macroalgae (Ulva reticulata, Sargassum wightii, Gracilaria sp) were determined using the GC-MS method with principal component analysis (PCA) and their potential efficacy against human pathogens and cervical carcinoma cells evaluated using MTT bioassay method. Our results showed that >30 metabolites were detected in three seaweeds, among these, steroids and fatty acids are the most dominant chemical group that highly contributes to discriminate this species. The PCA of GC-MS mass spectral variables showed a clear discrimination between three different species based on the phytochemical diversity of seaweeds. The extracts of U. reticulata exhibited anti-microbial activity with Pseudomonas aeruginosa (6.00?mm) and showed potential anti-proliferative activity against the HeLa cells (IC₅₀ 37?µmol/L) at concentration 1–50?µM treatment. Results of this study concluded that PCA analysis of mass spectral variables could be utilized as a reliable tool for species discrimination and chemotaxonomic classification of seaweeds.     

Autocatalytic O2 cleavage by an OCO3 trianionic pincer Cr(III) complex: isolation and characterization of the autocatalytic intermediate [Cr(IV)]2(μ-O) dimer

Synthetic and kinetic experiments designed to probe the mechanism of O(2) activation by the trianionic pincer chromium(III) complex [(t)BuOCO]Cr(III)(THF)(3) (1) (where (t)BuOCO = [2,6-((t)BuC(6)H(3)O)(2)C(6)H(3)](3-), THF = tetrahydrofuran) are described. Whereas analogous porphyrin and corrole oxidation catalysts can become inactive toward O(2) activation upon dimerization (forming a μ-oxo species) or product inhibition, complex 1 becomes more active toward O(2) activation when dimerized. The product from O(2) activation, [(t)BuOCO]Cr(V)(O)(THF) (2), catalyzes the oxidation of 1 via formation of the μ-O dimer {[(t)BuOCO]Cr(IV)(THF)}(2)(μ-O) (3). Complex 3 exists in equilibrium with 1 and 2 and thus could not be isolated in pure form. However, single crystals of 3 and 1 co-deposit, and the molecular stucture of 3 was determined using single-crystal X-ray crystallography methods. Variable (9.5, 35, and 240 GHz) frequency electron paramagnetic resonance spectroscopy supports the assignment of complex 3 as a Cr(IV)-O-Cr(IV) dimer, with a high (S = 2) spin ground state, based on detailed computer simulations. Complex 3 is the first conclusively assigned example of a complex containing a Cr(IV) dimer; its spin Hamiltonian parameters are g(iso) = 1.976, D = 2400 G, and E = 750 G. The reaction of 1 with O(2) was monitored by UV-visible spectrophotometry, and the kinetic orders of the reagents were determined. The reaction does not exhibit first-order behavior with respect to the concentrations of complex 1 and O(2). Altering the THF concentration reveals an inverse order behavior in THF. A proposed autocatalytic mechanism, with 3 as the key intermediate, was employed in numerical simulations of concentration versus time decay plots, and the individual rate constants were calculated. The simulations agree well with the experimental observations. The acceleration is not unique to 2; for example, the presence of OPPh(3) accelerates O(2) activation by forming the five-coordinate complex trans-[(t)BuOCO]Cr(III)(OPPh(3))(2) (4).     

Synthesis and evaluation of urea and thiourea derivatives of oxazolidinones as antibacterial agents

Urea and thiourea derivatives of oxazolidinones were synthesized and their inhibitory activity (MIC) was determined on the bacterial strains which includes clinical isolates and quality control organisms. The structure activity relationships were studied and a 3D-QSAR model was built using Genetic Function Approximation. Interestingly found that electron withdrawing groups at the ortho position of the phenyl ring enhances the activity.     

Advanced electrocatalytic materials based biosensors for cancer cell detection – A review

Herein, we have highlighted the latest developments on biosensors for cancer cell detection. Electrochemical (EC) biosensors offer several advantages such as high sensitivity, selectivity, rapid analysis, portability, low-cost, etc. Generally, biosensors could be classified into other basic categories such as immunosensors, aptasensors, cytosensors, electrochemiluminescence (ECL), and photo-electrochemical (PEC) sensors. The significance of the EC biosensors is that they could detect several biomolecules in human body including cholesterol, glucose, lactate, uric acid, DNA, blood ketones, hemoglobin, and others. Recently, various EC biosensors have been developed by using electrocatalytic materials such as silver sulfide (Ag₂S), black phosphene (BPene), hexagonal carbon nitrogen tube (HCNT), carbon dots (CDs)/cobalt oxy-hydroxide (CoOOH), cuprous oxide (Cu₂O), polymer dots (PDs), manganese oxide (MnO₂), graphene derivatives, and gold nanoparticles (Au-NPs). In some cases, these newly developed biosensors could be able to detect cancer cells with a limit of detection (LOD) of 1 cell/mL. In addition, many remaining challenges have to be addressed and validated by testing more real samples and confirm that these EC biosensors are more accurate and reliable to measure cancer cells in the blood and salivary samples.     

o-Cresol,thiourea and formaldehyde terpolymer – A cation exchange resin

o-Cresol–thiourea–formaldehyde terpolymer resin was synthesized through the condensation of o-cresol and thiourea with formaldehyde in the mole ratio 1:3:5 in the presence of 2 M hydrochloric acid as a catalyst. The resulting copolymer was characterized with IR and ¹H NMR spectral data. The average molecular weight of the resin was determined by Gel permeation chromatography. Thermal study of the resin was carried out to calculate the activation energy (Ea), enthalpy of activation (H³), entropy of activation (S³), free energy of activation (G³), and pre-exponential factor (A) of various steps of thermal decomposition of the terpolymer. The Dharwadkar and Kharkhanavala method has been used to calculate thermal activation energy and thermal stability. The chelation ion-exchange properties were also studied with the batch equilibrium method. The chelation ion-exchange properties of the copolymer was studied for Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ ions. The resin was proved to be selective chelating ion-exchange copolymer for certain metals. The study was carried out over a wide pH range and in media of various ionic strengths.     

Equilibrium, kinetics, mechanism, and process design for the sorption of methylene blue onto rice husk

Batch experiments were carried out for the sorption of methylene blue onto rice husk particles. The operating variables studied were initial solution pH, initial dye concentration, adsorbent concentration, and contact time. Equilibrium data were fitted to the Freundlich and Langmuir isotherm equations and the equilibrium data were found to be well represented by the Langmuir isotherm equation. The monolayer sorption capacity of rice husks for methylene blue sorption was found to be 40.5833 mg/g at room temperature (32 degrees C). The sorption was analyzed using pseudo-first-order and pseudo-second-order kinetic models and the sorption kinetics was found to follow a pseudo-second-order kinetic model. Also the applicability of pseudo second order in modeling the kinetic data was also discussed. The sorption process was found to be controlled by both surface and pore diffusion with surface diffusion at the earlier stages followed by pore diffusion at the later stages. The average external mass transfer coefficient and intraparticle diffusion coefficient was found to be 0.01133 min(-1) and 0.695358 mg/g min0.5. Analysis of sorption data using a Boyd plot confirms that external mass transfer is the rate limiting step in the sorption process. The effective diffusion coefficient, Di was calculated using the Boyd constant and was found to be 5.05 x 10(-04) cm2/s for an initial dye concentration of 50 mg/L. A single-stage batch-adsorber design of the adsorption of methylene blue onto rice husk has been studied based on the Langmuir isotherm equation.     

Influence of supporting electrolytes on the structure of electrodeposited SnO<Subscript>2</Subscript> thin films for energy storage applications

Different SnO₂ nanostructures (SnO₂Ns) were directly electrodeposited on the surface of anodized copper (Cu) substrates via the potentiostatic electrodeposition method with addition of supporting electrolytes. The effects of the supporting electrolytes and the electrodeposition parameters on the evolution of nanostructures and on the electrochemical properties of the SnO₂Ns were systematically investigated using field emission scanning electron microscope (FESEM) and electrochemical methods including cyclic voltammetry (CV) and chronoamperometry (CA). The results confirmed that SnO₂Ns exhibit alloying/de-alloying reactions with Li⁺ ions versus Ag/AgCl in aqueous electrolyte solution (LiOH·H₂O and Li₂CO₃). The super capacitor performance of the SnO₂Ns was investigated in 0.5-M Na₂SO₄ aqueous solution, and the highest specific capacitance of 110 Fg^?1 at a scan rate of 5 mV s^?1 was obtained for SnO₂ microspheres made up of nanocubes. Our study shows that supporting electrolytes and electrodeposition parameters play the significant role in the growth of SnO₂Ns and its electrochemical properties.