Functional-group-directed diastereoselective hydrogenation of aromatic compounds. 2(1)

Diastereoselective liquid-phase hydrogenation of a series of monosubstituted indan substrates was studied on supported rhodium catalysts. Predominantly the cis-cis diastereomer, obtained by hydrogenation from the diastereoface opposite the substituent at the stereogenic center, and the cis-trans diastereomer, obtained by hydrogenation from the diastereoface on the same side as the substituent, were formed. The diastereoselectivity depends on the balance between steric repulsion and electronic attraction of the substituent with the surface of the catalyst. For alkoxy and carboxyl groups (acid, methyl ester, and amide), the steric repulsion dominated and the cis-cis diastereomer was obtained with moderately high selectivity. The diastereoselectivity obtained in the hydrogenation was influenced by the addition of bases to the reaction mixture. Addition of triethylamine caused a small increase in the selectivity to the cis-cis diastereomer in some substrates, whereas the addition of NaOH significantly increased the selectivity toward the cis-trans isomer in all substrates.     

The Coordination Behavior of Oxygen-depleted Calixarenes towards d10 Noble Metal Ions

A calix[4]arene, in which two of the phenol functions are replaced by pyrazole units, [H₂(bpzCal)], was investigated as a ligand for Cu⁺, Ag⁺ and Au⁺ ions. Using [Cu(MeCN)₄]BF₄ and AgSbF₆ as the precursors, complexes [MH₂(bpzCal)]X (M = Cu, X = BF_4; M = Ag, X = SbF₆) were formed, where the calixarene ligands adopt a 1,3-alternate structure and the metal ions are coordinated linearly by the two pyrazolyl donors. [CuH₂(bpzCal)]BF₄ displayed a – for copper(I) complexes – unusual stability towards O₂, which is due to the steric protection of the Cu^I center. By contrast a dinuclear copper(I) complex [Cu₂(bpzCal)] that was obtained through treatment of [H₂(bpzCal)] with two equivalents of Cu(HMDS) is rather sensitive towards O₂. The preparation of a gold complex required the employment of a gold precursor, which contains one labile and one stabilizing neutral ligand, namely [(PPh₃)Au(NCMe)]SbF₆, which led to the formation of [(PPh₃)AuH₂(bpzCal)]SbF₆. In this complex [H₂(bpzCal)] acts only as a monodentate ligand for the gold center. Taken together, the results demonstrate the potential of [H₂(bpzCal)] in providing rather different coordination spheres for metal ions.     

Surprisingly high stability of collagen ABC heterotrimer: evaluation of side chain charge pairs

Type I collagen is a major component of skin, tendon, and ligament and forms more than 90% of bone mass. It is an AAB heterotrimer assembled from two identical alpha1 and one alpha2 chains. However, the majority of studies on the effects of amino acid substitution on triple helix stability have been performed on collagen homotrimeric helices. In a homotrimer, it is impossible to determine whether the contribution to stability is from the polyproline II helix propensity of the amino acids or from interhelix amino acid interactions. The presence of amino acids in all three chains further exaggerates their contribution. In contrast, in a heterotrimer, the individual chains may be tailored in order to have the substitution in one, two, or all three chains. Therefore, a heterotrimer can divulge specific information about any interaction based upon the substitutions in individual chains. In this paper, we evaluate the contribution of electrostatic interactions between side chain charge pairs on the stability of heterotrimers. We synthesize and analyze the stability of four AAB and four ABC heterotrimers including a surprisingly stable ABC heterotrimer composed of (DOG)10, (PKG)10, and (POG)10 chains (O = hydroxyproline). This heterotrimer has a stability comparable to that of a (POG)10 homotrimer even though D and K occur 20 times in the heterotrimeric helix and have been previously shown to significantly destabilize the triple helix compared to the P and O imino acids. These results show that the stability of heterotrimers cannot be directly determined from the analysis of charge pairs in homotrimers. Because collagen heterotrimers can be designed to have substitution in one, two, or three chains, it gives us the ability to decode cross-strand interactions in collagen in a similar fashion to alpha-helical coiled-coil interactions and DNA duplex hydrogen bonding.     

On Markov?CKrein characterization of the mean waiting time in M/G/K and other queueing systems

We propose a new research direction to reinvigorate research into better understanding of the M/G/K and other queueing systems??via obtaining tight bounds on the mean waiting time as functions of the moments of the service distribution. Analogous to the classical Markov?CKrein theorem, we conjecture that the bounds on the mean waiting time are achieved by service distributions corresponding to the upper/lower principal representations of the moment sequence. We present analytical, numerical, and simulation evidence in support of our conjectures.     

Direct imaging of carbon nanotubes spontaneously filled with solvent

For the first time, cryo-TEM imaging is used to directly show spontaneous filling of carbon nanotubes immersed in a solvent in the native state at ambient conditions. Multi-walled carbon nanotubes are dissolved in chlorosulfonic acid, and the high contrast between the acid and the carbon shows the difference between filled and unfilled nanotubes.     

Aldol reactions of 2-thioxotetrahydropyrimidin-4(1H)-ones: stereoregulations from endo- and exocyclic chiral centres

The steric regulations imparted by the substituent at N1 in lithium mediated asymmetric aldol reactions of conformationally restricted 3-aryl-1-((S)-1-phenylethyl)-2-thioxotetrahydropyrimidin-4(1H)-ones governed the formation of anti aldol adducts, by a kinetic reaction pathway. The preferential formation of the anti aldol diastereomers was also assisted by the steric effects of the electrophile through diastereofacial selection while the electronic effects of the aryl group at N3 remained subtle. Incorporation of an endocyclic methyl group at C6 witnessed the diastereoselective formation of an anti aldol adduct by regulation of π-facial selectivity. The absolute configurations of the aldol adducts were determined by computational calculations and NMR experiments, and confirmed by single crystal X-ray analysis.     

Fabrication, surface properties, and origin of superoleophobicity for a model textured surface

Inspired by the superhydrophobic effect displayed in nature, we set out to mimic the interplay between the chemistry and physics in the lotus leaf to see if the same design principle can be applied to control wetting and adhesion between toners and inks on various printing surfaces. Since toners and inks are organic materials, superoleophobicity has become our design target. In this work, we report the design and fabrication of a model superoleophobic surface on silicon wafer. The model surface was created by photolithography, consisting of texture made of arrays of ～3 μm diameter pillars, ～7 μm in height with a center-to-center spacing of 6 μm. The surface was then made oleophobic with a fluorosilane coating, FOTS, synthesized by the molecular vapor deposition technique with tridecafluoro-1,1,2,2-tetrahydrooctyltrichlorosilane. Contact angle measurement shows that the surface exhibits super repellency toward water and oil (hexadecane) with a water and hexadecane contact angles at 156° and 158°, respectively. Since the sliding angles for both liquids are also very small (～10°), we conclude that the model surface is both superhydrophobic and superoleophobic. By comparing with the contact angle data of the bare silicon surfaces (both smooth and textured), we also conclude that the superoleophobicity is a result of both surface texturing and fluorination. Results from investigations of the effects of surface modification and pillar geometry indicate that both surface oleophobicity and pillar geometry are contributors to the superoleophobicity. More specifically, we found that superoleophobicity can only be attained on our model textured surface when the flat surface coating has a relatively high oleophobicity (i.e., with a hexadecane contact angle of >73°). SEM examination of the pillars with higher magnification reveals that the side wall in each pillar is not smooth; rather it consists of a ～300 nm wavy structure (due to the Bosch etching process) from top to bottom. Comparable textured surfaces with (a) smooth straight side wall pillars and (b) straight side wall pillars with a 500 nm re-entrant structure made of SiO(2) were fabricated and the surfaces were made oleophobic with FOTS analogously. Contact angle data indicate that only the textured surfaces with the re-entrant pillar structure are both superoleophobic and superhydrophobic. The result suggests that the wavy structure at the top of each pillar is the main geometrical contributor to the superoleophobic property observed in the model surface.     

Thermodynamics of Swelling of Poly(NIPAM-co-NTBA-co-HEAAm) Hydrogels

In the present study, poly(N-Isopropylacrylacrylamide-co-N-tertiarybutylacrylamide-co-hydroxyethylcrylamide) (NIPAM-co-NTBA-co-HEAAm) hydrogels are prepared with variation of molar ratio of hydrophilic HEAAm and hydrophobic NTBA. The prepared hydrogels are characterized with elemental analysis and Fourier transform infrared (FTIR) spectroscopy. The thermodynamics of swelling properties of poly(NIPAM-co-NTBA-co-HEAAm) hydrogels have also been discussed. The experimental C/N ratios are comparable with the theoretical value. The enthalpy change of mixing ∆H_mix, entropy change of mixing ∆S_mix, free energy change of mixing ∆G_mix are determined for swelling of hydrogels at 25 °C. The value of total free energy of hydrogel swelling is found to be negative which confirms the lower critical solution temperature (LCST) exhibited in all hydrogels and the volume change transition shows the thermoresponsive behavior. The values of ∆S_mix increase and ∆G_mix decrease with increasing amount of hydrophobic NTBA content in the hydrogels. The values of free energy change of elasticity (∆G_el) are found to be increased with increasing the hydrophobic NTBA content followed by decrease in swelling percentage. Also, the transition temperature of the hydrogel is found to be decreased with increasing the hydrophobic NTBA.     

Thermo-Kinetic Study of Piperazine Immobilized Silica Surface

In the present study, the degradation process of piperazine (PP) immobilized silica gel (SiPP) is investigated under dynamic conditions. The degradation of SiPP is studied with thermogravimetric analyzer (TGA). The kinetics of degradation process is analyzed by Kissinger method, Flynn–Wall–Ozawa's (FWO) method, and Deconvolution method. It is found that degradation of SiPP can be described by parallel independent two-portion process model, which includes two processing state of the system (marked by processes 1 and 2), where process 1 and 2 can be attributed to decomposition processes of organic moiety attached on silica surface. The apparent activation energy (E_a) is calculated by Flynn–Wall–Ozawa's (FWO) method and deconvolution method.