Chloride estimation by a solid membrane electrode

Summary A solid membrane electrode based on Cr-Zr mixed hydrous oxide gel doped with Sn(II) ion has been proposed for the estimation of chloride ions. The electrode can be used in the concentration range 0.1 to 5×10^–5 M. The selectivity of the electrode system is much better as compared to other electrodes reported for the same ion.

---

Chloridbestimmung mit Hilfe einer festen Membran-Elektrode

Zusammenfassung Eine feste Membran-Elektrode auf der Basis einer mit Sn(II)-Ionen gedopten Mischung aus Chrom- und Zirkon-Oxidhydratgel wurde für die Bestimmung von Chloridionen vorgeschlagen. Diese Elektrode läßt sich im Konzentrationsgebiet 0,1 bis 5×10^–5 M verwenden. Die Selektivität ist erheblich besser als diejenige anderer Elektroden.

     

Identification of inhibitors of DNA topoisomerase II from a synthetic library of glycoconjugates

A library of 24 glycoconjugates related to glycosylated beta-amino acid derivative (I) was been prepared and screened against DNA topoisomerase-II of the filarial parasite S. cervi. Among these, compound 6 was found to be a potent inhibitor of DNA topoisomerase-II with 95% inhibition at 1.09 microM. Furthermore, compound 6 was at least three times more potent than the lead compound, glycosylated beta-amino acid derivative I.     

Some remarks on the use of rational functions as variational functions

When a Padé-type function is used as a trial function, it is necessary to investigate the location of singularities and the zeros of the optimized function. It is shown that an unacceptable wave function can sometimes yield numerically acceptable values because of the nature of the integration procedure. It is also shown that it is possible to remove the undesirable features of a lower order form by invoking the next approximation.     

Gas chromatographic determination of residual hydrazine and morpholine in boiler feed water and steam condensates

Summary Hydrazine, an oxygen scavenger in boiler water, was derivatised to the corresponding acetone azine and determined at the ng ml^–1 level by gas chromatography. Morpholine, a corrosion inhibitor used in steam boilers, was estimated either directly (if >2.0 g ml^–1) or by quantitative preconcentration (0.1 ng – 2.0 g ml^–1). To obtain symmetrical peaks for these amines, the column packing was coated with KOH. Use of a nitrogen-specific detector improved accuracy of estimation of hydrazine and morpholine, giving a RSD of 1.9–3.6%. Chromatographic analysis of these amines in boiler feed water and steam condensate samples collected from boilers servicing a petroleum refinery is described. Environmental safety regulations calls for monitoring of hydrazine and the methods developed can easily be adapted for this purpose.     

Reatarding effect of nitrogen ylide for the polymerization of N-vinyl pyrrolidone

-Picolinium-p-chlorophenacylide (-PCFY) acts as a retarder for polymerization of N-vinyl pyrrolidone. The polymerization runs were carried out at 60°C using benzene as an inert solvent. The kinetic equation for the present system may be written asR _p [-PCPY]^–1.0 [AIBN]^0.66[N-VP]^1.0. The value of overall energy of activation for polymerization in presence and absence of-PCPY was computed as 44.0 and 42.3 kJ mol^–1, respectively. The inverse relationship ofR _p and¯M _v with-PCPY suggests that-PCPY acts as a polymerization retarder. The retarding effect is also evidenced by higher initiator exponent value and higher value of energy of activation in presence of ylide. A mechanism is also proposed in which polymer propagating chain combines with one ylide component to give resonance stabilized radical.     

Sulfonation of arylamines: Part 12. Kinetics of thermal decomposition of dimethylanilinium sulfates

Three dimethylanilinium sulfates (DMAS) have been prepared and characterised by elemental and spectral studies. Thermal decomposition of these salts has been studied by TG and simultaneous TG-DTG technique and kinetic parameters were evaluated from both dynamic and isothermal TG data using mechanism based kinetic equations. The thermal decomposition pathways have also been suggested and it has been found that DMAS salts give dimethyl aminobenzenesulfonic acids (DMABSA) via solid state reaction. The primary step in the thermal decomposition involves proton transfer followed by sulfonation.This revised version was published online in November 2005 with corrections to the Cover Date.     

Investigation of nu(N-H) and nu(C-N) stretching modes of propylamine (C3H7NH2) in a binary system C3H7NH2 + CH3OH via concentration dependent Raman study and ab initio calculations

Raman spectra of propylamine (C3H7NH2) and its binary mixtures, C3H7NH2 + CH3OH with varying mole fractions of the reference system, C3H7NH2, C were recorded in two widely apart wavenumber regions, 3100-3600 cm(-1) and 1225-1325 cm(-1). In the former region, the two Raman bands at approximately 3305 and approximately 3326 cm(-1), obtained after the line shape analysis, which were assigned to symmetric nu(N-H) and anti-symmetric nu(N-H) stretching modes, respectively, show a downshift upon dilution. However, whereas the nu(N-H) anti-symmetric mode shows a shift of 18.6 cm(-1), the nu(N-H) symmetric mode shows a much smaller shift (5.7 cm(-1)) between neat liquid and high dilution, C = 0.1. This aspect has been explained using the optimized geometries calculated employing ab initio theory (MP2 level) for the neat C3H7NH2 and its different hydrogen-bonded complexes. The linewidth versus concentration plot for the nu(N-H) anti-symmetric stretching mode, however exhibits a distinct maxima at C = 0.4, which has been explained as a slight departure from the concentration fluctuation model. In the latter region, a symmetric peak is observed, which corresponds to nu(C-N) stretching mode, which shows an upshift upon dilution and an almost linear concentration dependence. This has also been explained in terms of the parameters obtained from the optimized geometries of the different hydrogen-bonded complexes.     

Thermodynamic Properties of Crystalline Cellulose Allomorphs Studied with Dispersion-Corrected Density Functional Methods

The phonon properties and thermodynamics of four crystalline cellulose allomorphs, Iα, Iβ, II, and III1, have been investigated using dispersion-corrected density functional theory (DFT). In line with experimental findings, the free energy differences between the studied cellulose allomorphs are small, less than 1 kJ/mol per atom. The calculated specific heat at constant volume (Cv) has been compared with the available experimental data in the temperature range 10–300 K. Quasiharmonic approximation has been employed to study thermodynamics and specific heat at constant pressure (Cp). For the studied temperature range of 10–400 K, the specific heat of all cellulose allomorphs shows very similar behavior. The calculated and experimental specific heat agree well at low temperatures below 100 K, but the deviation between theory and experiment increases with temperature. This may be due to increasing phonon anharmonicity as the temperature increases.     

On the occurrence of polytypism in single crystal CdTe thin films

Cadmium telluride thin films have been found to exhibit polytypism. The polytypes are formed when the as grown amorphous CdTe thin films undergo amorphous to crystalline transformation. The transformed single crystal regions correspond to different polytypes. Besides the well known zinc blende type 3 C cubic phase and less often found wurtzite type 2 H phase, four new polytypes (5 H, 6 H, 6 R and 15 R) the only ones known to-date have been found in the present investigation. In addition to the new polytypes, a new structural variant has also been found. This has the same ‘c’ parameter as that of the 2 H phase but has its ‘a’ lattice parameter as ‘a₀ \documentclass{article}\pagestyle{empty}\begin{document}$ a_{\rm o} \sqrt {3} $\end{document}’ (a₀ being the common lattice parameter of the polytypes). A feasible mechanism making the formation of polytypes intelligible has been suggested.     

Influence of divalent ions on composition and viscoelasticity of polyelectrolyte complexes

The addition of monovalent salts to polyelectrolyte complexes (PECs) comprising oppositely charged polyelectrolytes results in diminishing propensity for complexation, leading to complexes with higher water contents and lower moduli. However, the corresponding influence of multivalent ions on polyelectrolyte complexation has not yet been explored beyond enhanced screening effects. Here, we elucidate the significant impact of the valency of the salt cation on the composition, ion partitioning, and viscoelasticity of charge-matched PECs comprising sodium salt of poly(acrylic acid) and poly(allylamine hydrochloride). Notably, preferential partitioning of divalent cations (Ca²⁺ and Sr²⁺) into the complexes is observed, in stark contrast to the depletion of monovalent ions (Na⁺) from the complexes. Concomitantly, electrostatic bridging of polyanion chains by divalent ions is found to hinder their relaxation, manifesting as a non-monotonic evolution of the shear moduli of the complexes with increasing divalent salt concentrations. Relatedly, a failure of time-salt and time-ionic strength superposition approaches in presence of divalent ions is demonstrated, highlighting the nontrivial influence of these ions on chain relaxation behavior.