Unprecedented "In Water" imidazole carbonylation: paradigm shift for preparation of urea and carbamate

The first "In Water" imidazolecarbonylation of amine is described. A one pot reaction of carbonylimidazolide in water with a nucleophile provides an efficient and general method for the preparation of urea, carbamates and thiocarbamates. Use of an anhydrous solvent and an inert atmosphere could be avoided. Product precipitate out from the reaction mixture and can be obtained in high purity by filtration, resulting in a simple and scalable method.     

Bundle gerbes and moduli spaces

In this paper, we construct the index bundle gerbe of a family of self-adjoint Dirac-type operators, refining a construction of Segal. In a special case, we construct a geometric bundle gerbe called the caloron bundle gerbe, which comes with a natural connection and curving, and show that it is isomorphic to the analytically constructed index bundle gerbe. We apply these constructions to certain moduli spaces associated to compact Riemann surfaces, constructing on these moduli spaces, natural bundle gerbes with connection and curving, whose 3-curvature represent Dixmier-Douady classes that are generators of the third de Rham cohomology groups of these moduli spaces.     

Localized insulator-conductor transformation of graphene oxide thin films via focused laser beam irradiation

By scanning a focused laser beam over graphene oxide (GO) film deposited on SiO₂/Si substrates, conductive strips as small as 1 μm can be patterned directly either as a channel in the insulating matrix, or as a stand-alone micro belt. The conductivity was increased by at least two orders of magnitude with the mobility estimated in the range of 1–10 cm²/V s. Raman mapping and X-ray photoelectron spectroscopy studies demonstrated the reduction of GO in the laser-irradiated area. The conductance of the patterned channel was independent of the change in oxide-electrode contact resistance of the graphene, and increased linearly with increasing channel width. Increasing irradiation power by repeated scanning initially increased the conductivity of the irradiated area and saturated at a conductivity of ∼36 S/cm. Partial oxidative burning combined with photothermal reduction was identified as the underlying mechanism for the enhancement of the conductivity after laser irradiation on the GO film. Oxidative burning can be controlled by varying the film thickness and laser power.     

Oligo(p‐phenylene‐ethynylene)‐Derived Super‐π‐Gelators with Tunable Emission and Self‐Assembled Polymorphic Structures

Linear π‐conjugated oligomers are known to form organogels through noncovalent interactions. Herein, we report the effect of π‐repeat units on the gelation and morphological properties of three different oligo(p‐phenylene‐ethynylene)s: OPE3 , OPE5 , and OPE7 . All of these molecules form fluorescent gels in nonpolar solvents at low critical gel concentrations, thereby resulting in a blue gel for OPE3 , a green gel for OPE5 , and a greenish yellow gel for OPE7 . The molecule–molecule and molecule–substrate interactions in these OPEs are strongly influenced by the conjugation length of the molecules. Silicon wafer suppresses substrate–molecule interactions whereas a mica surface facilitates such interactions. At lower concentrations, OPE3 formed vesicular assemblies and OPE5 gave entangled fibers, whereas OPE7 resulted in spiral assemblies on a mica surface. At higher concentrations, OPE3 and OPE5 resulted in super‐bundles of fibers and flowerlike short‐fiber agglomerates when different conditions were applied. The number of polymorphic structures increases on increasing the conjugation length, as seen in the case of OPE7 with n=5, which resulted in a variety of exotic structures, the formation of which could be controlled by varying the substrate, concentration, and humidity.     

Ultrasound frame rate requirements for cardiac elastography: experimental and in vivo results

Cardiac elastography using radiofrequency echo signals can provide improved 2D strain information compared to B-mode image data, provided data are acquired at sufficient frame rates. In this paper, we evaluate ultrasound frame rate requirements for unbiased and robust estimation of tissue displacements and strain. Both tissue-mimicking phantoms under cyclic compressions at rates that mimic the contractions of the heart and in vivo results are presented. Sinusoidal compressions were applied to the phantom at frequencies ranging from 0.5 to 3.5 cycles/sec, with a maximum deformation of 5% of the phantom height. Local displacements and strains were estimated using both a two-step one-dimensional and hybrid two-dimensional cross-correlation method. Accuracy and repeatability of local strains were assessed as a function of the ultrasound frame rate based on signal-to-noise ratio values.The maximum signal-to-noise ratio obtained in a uniformly elastic phantom is 20 dB for both a 1.26 Hz and a 2 Hz compression frequency when the radiofrequency echo acquisition is at least 12 Hz and 20 Hz respectively. However, for compression frequencies of 2.8 Hz and 4 Hz the maximum signal-to-noise ratio obtained is around 16 dB even for a 40 Hz frame rate. Our results indicate that unbiased estimation of displacements and strain require ultrasound frame rates greater than ten times the compression frequency, although a frame rate of about two times the compression frequency is sufficient to estimate the compression frequency imparted to the tissue-mimicking phantom. In vivo results derived from short-axis views of the heart acquired from normal human volunteers also demonstrate this frame rate requirement for elastography.     

FT-IR, FT-raman and SERS spectra of L-proline

IR, Raman and surface-enhanced Raman scattering (SERS) spectra of L-proline were recorded and analyzed. The molecular plane assumes a tilted orientation with respect to the metal surface. The vibrational wavenumbers and corresponding vibrational assignments are examined theoretically using the Gaussian 03 set of quantum chemistry codes.     

DNA‐Decorated,Helically Twisted Nanoribbons: A Scaffold for the Fabrication of One‐Dimensional,Chiral, Plasmonic Nanostructures

Crafting of chiral plasmonic nanostructures is extremely important and challenging. DNA‐directed organization of nanoparticle on a chiral template is the most appealing strategy for this purpose. Herein, we report a supramolecular approach for the design of DNA‐decorated, helically twisted nanoribbons through the amphiphilicity‐driven self‐assembly of a new class of amphiphiles derived from DNA and hexaphenylbenzene (HPB). The ribbons are self‐assembled in a lamellar fashion through the hydrophobic interactions of HPB. The transfer of molecular chirality of ssDNA into the HPB core results in the bias of one of the chiral propeller conformations for HPB and induces a helical twist into the lamellar packing, and leads to the formation of DNA‐wrapped nanoribbons with M‐helicity. The potential of the ribbon to act as a reversible template for the 1D chiral organization of plasmonic nanomaterials through DNA hybridization is demonstrated.     

DNA‐Decorated,Helically Twisted Nanoribbons: A Scaffold for the Fabrication of One‐Dimensional,Chiral, Plasmonic Nanostructures

Crafting of chiral plasmonic nanostructures is extremely important and challenging. DNA‐directed organization of nanoparticle on a chiral template is the most appealing strategy for this purpose. Herein, we report a supramolecular approach for the design of DNA‐decorated, helically twisted nanoribbons through the amphiphilicity‐driven self‐assembly of a new class of amphiphiles derived from DNA and hexaphenylbenzene (HPB). The ribbons are self‐assembled in a lamellar fashion through the hydrophobic interactions of HPB. The transfer of molecular chirality of ssDNA into the HPB core results in the bias of one of the chiral propeller conformations for HPB and induces a helical twist into the lamellar packing, and leads to the formation of DNA‐wrapped nanoribbons with M‐helicity. The potential of the ribbon to act as a reversible template for the 1D chiral organization of plasmonic nanomaterials through DNA hybridization is demonstrated.     

Ferroelectric polymer nanocomposite alignment layer in twisted nematic liquid crystal devices for reducing switching voltage

Twisted nematic liquid crystal device (TNLCD) was fabricated using a ferroelectric zinc oxide (ZnO)-doped polyimide alignment layer. The ferroelectric nanoparticle can produce a local electric field, which can trigger the orientation of liquid crystal molecule and reduces the switching voltage. The uniform dispersion of ferroelectric ZnO nanoparticles in the alignment layer was studied using field emission scanning electron microscopy and atomic force microscopy. The ferroelectric property of ZnO-doped polyimide was investigated using dynamic contact electrostatic force microscopy. An increased local electric field due to the presence of nano ZnO was confirmed with the help of scanning tunnelling microscopy. An augmentation of capacitance was observed with an increase in concentration, which substantiates the reduction of switching voltage of TNLCD with the modification of ferroelectric nanoparticle-doped alignment layer.