Quantitative information on pore size distribution from the tangents of comparison plots

The comparison plot obtained from the nitrogen adsorption data has a similar shape to that of the curve of accumulating pore volume of a solid. The intrinsic nature of this relation is discussed. It is known that the derivatives of the accumulating pore volume with respect to the pore size are the pore size distribution (PSD) of the solid. Thus, the tangent curve of the comparison plot can display, at least qualitatively, the PSD of a solid, over a wide range of pore sizes (from approximately 1 to 50 nm) because the comparison plot is applicable to both micropores and mesopores. Quantitative pore structure information can be derived from the comparison plots by establishing a relationship between the t value and the pore size from the samples with uniform pore structure and known pore sizes, such as MCM-41 and alumina pillared clay samples. A calculation procedure to derive quantitative PSD from the comparison plots is suggested, giving reasonable results. This study proposes concise and reliable methods based on the comparison plots to derive information on pore structure in porous solids.     

Adsorption of hydrocarbons on mesoporous SBA-15 and PHTS materials

Plugged hexagonal templated silica (PHTS) materials are synthesized using a high TEOS/EO(20)PO(70)EO(20) ratio in the SBA-15 synthesis. This generates internal microporous nanocapsules or plugs in part of the channels, which could be inferred from the two-step desorption branch. These materials exhibit a tunable amount of open and plugged pores and a very high micropore volume (up to 0.24 mL/g) and are more stable than the conventional micellar templated structures known so far. In this study the adsorption properties of PHTS are investigated and compared to those of its plug-free analogue SBA-15. For this purpose nitrogen, n-hexane, n-heptane, c-hexane, 3-methylpentane, 1-hexene, and water were adsorbed on SBA-15 and PHTSs with a different ratio of open and plugged mesopores. The adsorption of n-hexane, c-hexane, n-heptane, and 3-methylpentane on SBA-15 and PHTS-A demonstrated that the presence of the plugs had an effect on the uptake of adsorbate in the low relative pressure region, the position of the capillary condensation step, and the total adsorbed amount of adsorbate. The results showed that n-heptane and 3-methylpentane cannot access part of the micropore system of SBA-15 and PHTS-A. Adsorption of c-hexane and n-hexane on PHTS-A indicated that not only the kinetic diameter but also the shape of the molecule is an important factor for being able to be adsorbed into the micropores or past the plugs. Moreover, these two adsorbates were the most efficient in filling up the available pore volume. From the adsorption of n-hexane on PHTSs with a different ratio of open and plugged pores, it was concluded that the size of the plugs differed, which depends on the synthesis conditions. Water adsorption isotherms proved SBA-15 and PHTS-B to be more hydrophobic than PHTS-A. n-Hexane, 1-hexene, and toluene were adsorbed on SBA-15 and the PHTSs to investigate the influence of the polarity of the adsorbate. The isotherms showed higher uptakes for polar adsorbates on more hydrophobic materials and vice versa.     

Complementary use of Fourier transform laser microprobe mass spectrometry and time-of-flight static secondary ion mass spectrometry for the study of the surface adsorption of organic dyes on silicate materials

The adsorption of organic ionic dyes on different pore size engineered silica materials with potential application for industrial wastewater treatment has been investigated using Fourier transform laser microprobe mass spectrometry (FT-LMMS) and time-of-flight secondary ion mass spectrometry (TOF-S-SIMS). The complementary use of the two methods with different information depth allowed data on the subsurface distribution and pore penetration of the adsorbed organic compounds. Macroscopic methods were employed to determine the amount adsorbed on the particles and the specific external surface area. Local MS analysis allows identification of the organic dyes exclusively at the outer particle surface when the pore size is inferior to the size of the adsorbing molecule, or at the surface of the channels inside the material. Specifically, the monolayer information depth of TOF-S-SIMS causes a signal to refer essentially to the adsorbate at the outer particle surface, which is only a fraction of the total adsorption in mesoporous materials, while FT-LMMS allowed detection of the presence of adsorbates at the outer surface as well as inside the subsurface of 10 to 50 nm depending on the material under study. The observed data open perspectives for the molecular monitoring of the adsorption behaviour of different materials at the (sub) microm scale.     

New possibilities for least-squares fitting of mössbauer spectra

A non-linear least-squares program for the analysis of Mössbauer spectra is presented. The program is capable of resolving very complex spectra and can be used on a minicomputer system, with regard to both calculation time and memory requirements. The commonly used x²-minimization algorithm was slightly adapted, so as to broaden its working range. All possibilities for fixing or changing parameters are provided. Two new parameter limitation techniques, which greatly reduce the need for manual intervention during the fitting process, are discussed extensively.     

Preparation of hollow silica spheres with different mesostructures

Hollow silica spheres were quickly synthesized by an octylamine (OA) templating method using tetraethyl orthosilicate (TEOS) as the silica source. N₂-sorption results indicate that the hollow spheres have high surface areas and pore volumes. XRD and TEM measurements reveal that the structure of the hollow spheres depends on the amount of TEOS used in the synthesis. When low amount of TEOS is added, the template-containing precursor spheres depict an XRD pattern with two peaks, which can be indexed to a lamellar phase. After the removal of the template, the obtained hollow spheres show no diffraction peaks in the XRD pattern, suggesting that the nanopores in the silica shells are disordered. If increasing the amount of TEOS, either the uncalcined or the calcined sample gives an XRD pattern with a single diffraction peak. The mesostructure of these hollow silica spheres is typically as HMS materials. TGA analyses suggest that the interaction between the silica species and surfactant is stronger in the latter case.     

Controlled gas adsorption properties of various pillared clays

Microporous pillared clays (PILC) were prepared by the intercalation of montmorillonite with particles of titania (Ti-PILC), zirconia (Zr-PILC), alumina (Al-PILC), iron oxide (Fe-PILC) and mixed lanthania/alumina (LaAl-PILC). Nitrogen adsorption isotherms (77 K) and XRD data provided information on the porosity, surface area, micropore volume and interlayer distance of these samples. The surface area varied between 198 and 266 m²/g for Ti- and Fe-PILC, respectively. The titania pillared clay had also the highest micropore volume (0.142 cc/g) and interlayer spacing (16–20 Å), compared to the Zr-PILC, which had the smallest spacing between the layers (max, 4 Å). Despite this fact, Zr-PILC always showed a high adsorption capacity for gases such as N₂, O₂, Ar or CO₂, due to its high adsorption field in the very small micropores.From gas adsorption experiments on these various PILCs, it became clear that their adsorption properties depend on the pillars in three ways: (i) the pillar height, (ii) the distribution of the pillars between the clay layers and (iii) the nature of the pillaring species.The incorporation of other elements in the pillars leads to specific adsorption sites in the pores. This was demonstrated by the preparation of mixed Fe/Cr and Fe/Zr pillared clays. Compared to the parent Fe-PILC, the incorporation of chromium and zirconium in the iron oxide pillars had a positive influence on the adsorption capacity. Also the modification of a PILC with cations increases both capacity and selectivity for gases. This was confirmed by the increased adsorption of N₂, O₂ and CO₂ at 273 K on a Sr²⁺ exchanged Al-PILC.     

Reactivity differences between isolated and vicinal vinyl acetate functions in high pressure ethylene/vinyl acetate copolymers

Three ethylene/vinyl acetate copolymers (3.5, 12.0 and 18.8 mol% VA; average melt index 8.5 g/10 min) were transformed into ethylene/vinyl alcohol copolymers and ethylene/vinyl alcohol/vinyl acetate terpolymers by homogeneous saponification. The reaction rate increased with mol% VA. This feature originated in the reactivity differences beteen vicinal and isolated VA functions. Simultaneous steric and polarity effects caused the reaction rate differences. ¹H-NMR, i.r., dielectric measurements and additional saponification reactions confirmed the difference of reactivity.     

Design and applications of a home-built in situ FT-Raman spectroscopic cell

In the field of heterogeneous catalysis, in situ spectroscopy is one of the topics with growing interest. The characterization of a catalyst under working conditions is essential to identify the catalytic active site and to study the relation between the surface structure of a catalyst and its catalytic performance. For the first time, the design of an in situ spectroscopic cell for FT-Raman is presented and its performance is demonstrated by monitoring the thermal conversion of as synthesized mesoporous titanium and by characterizing the molecular surface structure of the vanadium oxides grafted on MCM-48 after exposure to a probe molecule. The results in both cases indicate that the in situ FT-Raman cell is a promising technique for characterizing the molecular surface structure of catalyst materials.