Direct chromatographic methods for the rapid determination of homogentisic acid in strawberry tree (Arbutus unedo L.) honey

Two rapid and direct chromatographic methods based on reverse phase-high performance liquid chromatography (RP-HPLC) and ion chromatography (IC) were developed for the determination of homogentisic acid (HA) in honey. This is the marker of the botanic origin of strawberry tree honey. The methods were validated and tested using 22 samples from Sardinia, Italy. The IC method is faster than the RP-HPLC one (6 min versus 13 min of total run), but it is slightly less sensitive (the limit of detection (LOD), is 26 mg kg(-1) versus 15 mg kg(-1)) and reproducible (relative standard deviation, RSD, of 10.4 and 4.4%, respectively). The whole dataset of validation parameters allows both the proposed methods to be considered as bias-free (by recovery tests, comparison of analytical results of the two independent methods and analysis of a synthetic sample) and precise (both the techniques show a repeatability better than 2% repeatability in the range between 70 and 600 mg kg(-1)).     

Study of the short-term release of the ionic fraction of heavy metals from dental amalgam into synthetic saliva, using anodic stripping voltammetry with microelectrodes

The present paper describes a fast and reproducible procedure, employing differential pulse stripping analysis technique with graphite microelectrodes, for the quantitative evaluation of the ionic fraction of heavy metals (namely Hg, Cu, and Zn) released from dental amalgams into synthetic saliva during 6-90 h contact between amalgam and saliva, after completion of the dental restoration (short-term release). The Zn(2+) concentration was evaluated by linear calibration, whereas Cu(2+) and Hg(2+) contents were estimated by the standard additions method. While the concentration of Zn(2+) ion does not increase significantly anymore after a 6-h contact (values from 288+/-12 to 346+/-12 mugdm(-3) at time of contact from 6 to 90 h, respectively), in the same time interval the concentration of both Cu(2+) and Hg(2+) ions progressively increases (from 38+/-6 to 197+/-4 mugdm(-3) and from 15+/-3 to 101+/-2 mugdm(-3), respectively). The results of the release tests reveal that Hg concentration is at the highest level of risk (HBM III), as identified by the three human biomonitoring categories suggested by the Institut für Wasser-, Boden- und Lufthygiene des Umweltbundesamtes (Germany) for the estimation of potential harmful effects on health due to exposure to heavy metals.     

Effect of the substrate ferroelastic transition on epitaxial La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> films grown on LaAlO<Subscript>3</Subscript>

Thin films of La_0.7Sr_0.3MnO₃ were grown by molecular beam epitaxy on (001)LaAlO₃ crystals. High resolution X-ray diffraction analysis proves the presence of twins in the films at room temperature, showing that the twin structure of the substrate which forms at the ferroelastic transition at T_F = 813 K served as a template for the film microstructure. Magnetic measurements indicate a thermomagnetic irreversibility which is ascribed to the quenched disorder related to twinning and discussed in terms of coexisting ferromagnetic and spin disordered regions connected with the undeformed domain cores and strained domain walls respectively.     

Evidence for sevenfold coordination in the first solvation shell of Hg(II) aqua ion

A quite unexpected sevenfold coordination of the hydrated Hg(II) complex in aqueous solution is revealed by an extensive study combining X-ray absorption spectroscopy (XAS) and quantum mechanics/molecular dynamics (QM/MD) calculations. As a matter of fact, the generally accepted octahedral solvation of Hg(II) ion cannot be reconciled with XAS results. Next, refined QM computations point out the remarkable stability of a heptacoordinated structure with C2 symmetry, and long-time MD simulations by new interaction potentials including many-body effects reveal that the hydrated complex has a quite flexible structure, corresponding for most of the time to heptacoordinated species. This picture is fully consistent with X-ray absorption near-edge structure experimental data which unambiguously show the preference for a sevenfold instead of a sixfold coordination.     

Design, synthesis and anti flaviviridae activity of N(6)-, 5',3'-O- and 5',2'-O-substituted adenine nucleoside analogs

During a random screening of representative libraries of nucleoside analogues we discovered that the adenine derivatives FEVB28 and FEG118 were Flaviviridae inhibitors endowed with potency comparable, if not superior, to that of ribavirin. Those studies prompted us to design a new class of protected nucleoside analogs, reported herein, which displays interesting anti-bovine viral diarrhea virus (BVDV) activity and low cytotoxicity in cell-based assays (4, 23, 29 EC(50): 14, 11, 26 microM respectively, CC(50)>100 microM) and appreciable activity in enzyme assays against the RNA dependent RNA polymerase (RdRp) of BVDV (4, 23, 29, RdRp inhibition activity 27, 16, 15 microM respectively). A molecular modeling study was also carried out to highlight the possible interactions between this compounds class and the corresponding hepatitis C virus (HCV) enzyme.     

Analysis of rheology and wall depletion of microfibrillated cellulose suspension using optical coherence tomography

A rheometric method based on velocity profiling by optical coherence tomography (OCT) was used in the analysis of rheological and boundary layer flow properties of a 0.5% microfibrillated cellulose (MFC) suspension. The suspension showed typical shear thinning behaviour of MFC in the interior part of the tube, but the measured shear viscosities followed interestingly two successive power laws with an identical flow index (exponent) and a different consistency index. This kind of viscous behaviour, which has not been reported earlier for MFC, is likely related to a sudden structural change of the suspension. The near-wall flow showed existence of a slip layer of 2–12 μm thickness depending on the flow rate. Both the velocity profile measurement and the amplitude data obtained with OCT indicated that the slip layer was related to a concentration gradient appearing near the tube wall. Close to the wall the fluid appeared nearly Newtonian with high shear rates, and the viscosity approached almost that of pure water with decreasing distance from the wall. The flow rates given by a simple model that included the measured yield stress, viscous behavior, and slip behavior, was found to give the measured flow rates with a good accuracy.     

Thermodynamic features and environmental effects in a two-states molecular device under strict electrochemical control

The thermodynamic features of a synthetic molecular thread, recently proposed acting as an electrochemically-driven two-states molecular device, have been systematically investigated by means of nanoseconds time-scale classical molecular dynamics (MD) simulations and basic statistical mechanics relations. Results clearly suggest that the accessible conformational space of such a potential molecular switch shows a strong environmental dependence: the reversible molecular switching mechanism observed in liquid solution is effectively suppressed when the synthetic thread is hypothesized working in vacuo. Such a result has been related to a subtle energetic/entropic balance experienced by the whole system (solute and solvent) during the intramolecular conformational transition of the molecular thread, in presence and in absence of the solvent.     

Janus‐Like Squaramide‐Based Hosts: Dual Mode of Binding and Conformational Transitions Driven by Ion‐Pair Recognition

New tripodal squaramide‐based hosts have been synthesised and structurally characterised by spectroscopic methods. In 2.5 % (v/v) [D₆]DMSO in CDCl₃, compound 4 formed dimeric assemblies [log K_dim=3.68(8)] as demonstrated by ¹H NMR spectroscopy and UV dilution experiments. AFM and SEM analyses revealed the formation of a network of bundled fibres, which indicates a preferential mechanism for aggregation. These C₃‐symmetric tripodal hosts exhibited two different and mutually exclusive modes of binding, each one easily accessible by simultaneous reorientation of the squaramide groups. In the first, a convergent disposition of the NH squaramide protons allowed the formation of an array of N? H???X^? hydrogen bonds with anions. In the second mode, reorientation of carbonyl squaramide groups allowed multiple C?O???H interactions with ammonium cations. The titration of 4 with different tetraalkylammonium iodides persistently showed the formation of 1:1 complexes, as well as 1:2 and 1:3 complexes. The corresponding stoichiometries and binding affinities of the complexes were evaluated by multi‐regression analysis. The formation of high‐order complexes, supported by ROESY, NOESY and mass spectrometry experiments, has been attributed to the insertion of NR₄I ion pairs between the carbonyl and NH protons of the squaramide groups located in adjacent arms of 4 . The observed effects reflect the induction of significant conformational changes in the hosts, mainly in relation to the relative orientation of the squaramide groups adapting their geometries to incoming ion‐pair complementary substrates. The results presented herein identify and fully describe two different modes of ion‐pair recognition aimed at directing conformational transitions in the host, therefore establishing a base for controlling more elaborate movements of molecular devices through ion‐pair recognition.     

Substrate Range of the Titanium TADDOLate Catalyzed Asymmetric Fluorination of Activated Carbonyl Compounds

The substrate range of the [TiCl₂(TADDOLate)] (TADDOL=α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol)‐catalyzed asymmetric α‐fluorination of activated β‐carbonyl compounds has been investigated. Optimal conditions for catalysis are characterized by using 5 mol‐% of TiCl₂(naphthalen‐1‐yl)‐TADDOLate) as catalyst in a saturated (0.14 mol/l) MeCN solution of F‐TEDA (1‐(chloromethyl)‐4‐fluoro‐1,4‐diazoniabicyclo[2.2.2]octane bis‐[tetrafluoroborate]) at room temperature. A series of α‐methylated β‐keto esters (3‐oxobutanoates, 3‐oxopentanoates) with bulky benzyl ester groups (60–90% ee) or phenyl ester (67–88% ee) have been fluorinated readily, whereas α‐acyl lactones were also readily fluorinated, but gave lower inductions (13–46% ee). Double stereochemical differentiation in β‐keto esters with chiral ester groups raised the stereoselectivity to a diastereomeric ratio (dr) of up to 96.5 : 3.5. For the first time, β‐keto S‐thioesters were asymmetrically fluorinated (62–91.5% ee) and chlorinated (83% ee). Lower inductions were observed in fluorinations of 1,3‐diketones (up to 40% ee) and β‐keto amides (up to 59% ee). General strategies for preparing activated β‐carbonyl compounds as important model substrates for asymmetric catalytic α‐functionalizations are presented (>60 examples).     

The effect of wall depletion on the rheology of microfibrillated cellulose water suspensions by optical coherence tomography

Rheology of microfibrillated cellulose (MFC) water suspensions was characterized with a rotational rheometer, augmented with optical coherence tomography (OCT). To the best of the authors’ knowledge, this is the first time the behavior of MFC in the rheometer gap was characterized by this real-time imaging method. Two concentrations, 0.5 and 1 wt% were used, the latter also with 10^?3 and 10^?2 M NaCl. The aim was to follow the structure of the suspensions in a rotational rheometer during the measurements and observe wall depletion and other factors that can interfere with the rheological results. The stepped flow measurements were performed using a transparent cylindrical measuring system and combining the optical information to rheological parameters. OCT allows imaging in radial direction from the outer geometry boundary to the inner geometry boundary making both the shear rate profile and the structure of the suspension visible through the rheometer gap. Yield stress and maximum wall stress were determined by start-up of steady shear and logarithmic stress ramp methods and they both reflected in the stepped flow measurements. Above yield stress, floc size was inversely proportional to shear rate. Below the yield stress, flocs adhered to each other and the observed apparent constant shear stress was controlled by flow in the depleted boundary layer. With higher ionic strength (10^?2 M NaCl), the combination of yield stress and wall depletion favored the formation of vertical, cylindrical, rotating floc structures (rollers) coupled with a thicker water layer originating at the suspension—inner cylinder boundary at low shear rates.