Inhibition of histamine mediated responses by Mirabilis jalapa: confirming traditional claims made about antiallergic and antiasthmatic activity

The roots of Mirabilis jalapa are used traditionally in allergic skin disorders and asthma. The effect of an ethanol:acetone (1:1) extract of the roots of M. jalapa was studied for antihistaminic activity using a guinea pig tracheal chain preparation and clonidine-induced mast cell granulation in mice. Its antiallergic activity was evaluated using milk-induced eosinophilia and albumin-induced paw oedema in mice. The extract (0.5 mL of 100 mg mL(-1)) inhibited histamine-induced guinea pig tracheal chain contractions non-competitively. The extract (100 or 200 mg kg(-1) i.p.) inhibited milk-induced eosinophilia, albumin-induced paw oedema and protected mast cells against clonidine-induced granulation. The study justified the folkloric use of M. jalapa in the treatment of allergic diseases and asthma.     

Quantification of histidine, 1-methylhistidine and 3-methylhistidine in plasma and urine by capillary electrophoresis UV-detection

We describe a new CE method with UV-detection for the quantification of histidine (His) and its methylated forms 1-methylhistidine and 3-methylhistidine, both in plasma and urine. Analytes were basically resolved using a 60?mmol/L Tris-phosphate run buffer pH 2.2 in less than 12?min. The use of a mixture of ACN/ammonia (80:20) for protein precipitation allows the quantitative recovery of all His from plasma. The optimization of the sample volume injection permits to reach an LOD of 20?nmol/L, thus improving the sensitivity of about hundred times in comparison to the previous described assays. Moreover, the opportunity to also measure creatinine in the same run makes it possible to evaluate the renal function contemporarily, thus avoiding further dosages with significant time saving. The application method has been proved by measuring His, 1-methylhistidine and 3-methylhistidine in 44 healthy subjects. In conclusion, our new method seems to be an inexpensive, fast and specific tool to assess large numbers of patients for routine analysis both in clinical and research laboratories.     

VO2+ complexation by bioligands showing keto-enol tautomerism: a potentiometric, spectroscopic, and computational study

The interaction of VO(2+) ion with ligands of biological interest that are present in important metabolic pathways--2-oxopropanoic acid (pyruvic acid, pyrH), 3-hydroxy-2-oxopropanoic acid (3-hydroxypyruvic acid, hydpyrH), oxobutanedioic acid (oxalacetic acid, oxalH(2)), (S)-hydroxybutanedioic acid (l-malic acid, malH(2)), and 2,3-dihydroxy-(E)-butanedioic acid (dihydroxyfumaric acid, dhfH(2))--was described. Their complexing capability was compared with that of similar ligands: 3-hydroxy-2-butanone (hydbut) and 3,4-dihydroxy-3-cyclobutene-1,2-dione (squaric acid, squarH(2)). All of these ligands (except l-malic acid) exhibit keto-enol tautomerism, and the presence of a metal ion can influence such an equilibrium. The different systems were studied with electron paramagnetic resonance (EPR) and UV-vis spectroscopies and with pH potentiometry. Density functional theory (DFT) methods provide valuable information on the relative energy of the enol and keto forms of the ligands both in the gas phase and in aqueous solution, on the geometry of the complexes, and on EPR and electronic absorption parameters. The results show that most of the ligands behave like α-hydroxycarboxylates, forming mono- and bis-chelated species with (COO(-), O(-)) coordination, demonstrating that the metal ion is able to stabilize the enolate form of some ligands. With dihydroxyfumaric acid, the formation of a non-oxidovanadium(IV) complex, because of rearrangement of dihydroxyfumaric to dihydroxymaleic acid (dhmH(2)), can be observed. With 3-hydroxy-2-butanone and 3,4-dihydroxy-3-cyclobutene-1,2-dione, complexation of VO(2+) does not take place and the reason for this behavior is explained by chemical considerations and computational calculations.     

Analytical Approaches in Official Food Safety Control: An LC-Orbitrap-HRMS Screening Method for the Multiresidue Determination of Antibiotics in Cow,Sheep, and Goat Milk

The presence of unauthorized substances, such as residues of veterinary medicines or chemical contaminants, in food can represent a possible health concern. For this reason, a complete legislative framework has been established in the European Union (EU), which defines the maximum limits allowed in food and carries out surveillance programs to control the presence of these substances. Official food control laboratories, in order to ensure a high level of consumer protection, must respond to the challenge of improving and harmonizing the performance of the analytical methods used for the analysis of residues of authorized, unauthorized, or prohibited pharmacologically active substances. Laboratories must also consider the state of the art of the analytical methodologies and the performance requirements of current legislation. The aim of this work was to develop a multiresidue method for the determination of antibiotics in milk, compliant with the criteria and procedures established by Commission Implementing Regulation (EU) 2021/808. The method uses an LC-Orbitrap-HRMS for the determination of 57 molecules of antibiotic and active antibacterial substances belonging to different chemical classes (beta-lactams, tetracyclines, sulfonamides, quinolones, pleuromutilins, macrolides, and lincosamides) in bovine, ovine, and goat milk samples. It provides a simple and quick sample pretreatment and a subsequent identification phase of analytes, at concentrations equal to or lower than the maximum residual limit (MRL), in compliance with Commission Regulation (EU) 2010/37. The validation parameters: selectivity, stability, applicability, and detection capability (ccβ), are in agreement with the requirements of Commission Implementing Regulation (EU) 2021/808 and demonstrated the effectiveness of the method in detecting veterinary drug residues at the target screening concentration (at the MRL level or below), with a false positive rate of less than 5%. This method represents an effective solution for detecting antibiotics in milk, which can be successfully applied in routine analyses for official food control plans.     

Zr4+ solution structures from pair distribution function analysis

The structures of metal ions in solution constitute essential information for obtaining chemical insight spanning from catalytic reaction mechanisms to formation of functional nanomaterials. Here, we explore Zr⁴⁺ solution structures using X-ray pair distribution function (PDF) analysis across pH (0–14), concentrations (0.1–1.5 M), solvents (water, methanol, ethanol, acetonitrile) and metal sources (ZrCl₄, ZrOCl₂·8H₂O, ZrO(NO₃)₂·xH₂O). In water, [Zr₄(OH)₈(OH₂)₁₆]⁸⁺-tetramers are predominant, while non-aqueous solvents contain monomeric complexes. The PDF analysis also reveals second sphere coordination of chloride counter ions to the aqueous tetramers. The results are reproducible across data measured at three different beamlines at the PETRA-III and MAX IV synchrotron light sources.

Zr⁴⁺ solution structures have been determined using X-ray pair distribution function analysis across pH, concentrations, solvents and metal sources.     

The effect of wall depletion on the rheology of microfibrillated cellulose water suspensions by optical coherence tomography

Rheology of microfibrillated cellulose (MFC) water suspensions was characterized with a rotational rheometer, augmented with optical coherence tomography (OCT). To the best of the authors’ knowledge, this is the first time the behavior of MFC in the rheometer gap was characterized by this real-time imaging method. Two concentrations, 0.5 and 1 wt% were used, the latter also with 10^?3 and 10^?2 M NaCl. The aim was to follow the structure of the suspensions in a rotational rheometer during the measurements and observe wall depletion and other factors that can interfere with the rheological results. The stepped flow measurements were performed using a transparent cylindrical measuring system and combining the optical information to rheological parameters. OCT allows imaging in radial direction from the outer geometry boundary to the inner geometry boundary making both the shear rate profile and the structure of the suspension visible through the rheometer gap. Yield stress and maximum wall stress were determined by start-up of steady shear and logarithmic stress ramp methods and they both reflected in the stepped flow measurements. Above yield stress, floc size was inversely proportional to shear rate. Below the yield stress, flocs adhered to each other and the observed apparent constant shear stress was controlled by flow in the depleted boundary layer. With higher ionic strength (10^?2 M NaCl), the combination of yield stress and wall depletion favored the formation of vertical, cylindrical, rotating floc structures (rollers) coupled with a thicker water layer originating at the suspension—inner cylinder boundary at low shear rates.     

Functional characterisation of Fab′-fragments self-assembled onto hydrophilic gold surfaces

Antibody Fab′-fragments have been immobilised on hydrophilic gold by direct self-assembly, and embedded in a matrix of non-ionic hydrophilic polymers, tris(hydroxymethyl)methylacrylamide, carrying lipoate terminal linking groups. Different polymers were synthesised, and co-adsorbed or post-adsorbed between the antibody fragments in order to optimise the antigen binding. Various factors were investigated that influence the activity of the immobilised Fab′-fragments for binding of the antigen, human IgG. The Fab′-fragments were immobilised in dense layers close to monolayer coverage, and the stoichiometric efficiency of immobilisation was up to 30%, with the human IgG also approaching monolayer coverage. The cleaning of the gold surface was a crucial factor in preservation of activity. Besides the usual treatment in hot ammonia/peroxide solution, hot DMSO appeared to be highly effective as a cleaning agent.     

Laterally-corrugated ridge-waveguide distributed feedback lasers at 980 nm

The paper presents a simulation-based analysis of laterally-corrugated ridge-waveguide distributed feedback semiconductor lasers emitting at 980 nm. The simulations were performed using software developed in-house and the PICS3D software package from Crosslight Software Inc. The effects of the corrugation geometry, phase-shift section, and mirror reflectivities on single longitudinal mode operation are discussed. The lasers, designed along the guidelines derived from the simulation results, were fabricated by using molecular beam epitaxy for wafer growth and low-cost nano-imprint lithography. They exhibited stable single-mode operation with up to 50 dB side-mode suppression ratio.