Stability study and quantitative determination of mebeverine hydrochloride in tablets by means of reversed-phase high-performance liquid chromatography

Summary A rapid and specific reversed-phase high-performance liquid chromatographic method (RPHPLC) is described for the determination of mebeverine hydrochloride in tablets. Elution was performed on an octyl silane column with a methanol-water mixture (75-25), containing 0.05% hexylamine as silanol-blocking agent, adjusted to pH 5.0 with phosphoric acid. The method gave accurate, precise and reproducible results. The mean recovery of the drug from six synthetic tablet mixtures was 100.0% with a relative standard deviation (RSD) of 0.94%. In order to test the specificity of the method, the interference of the degradation compounds of mebeverine hydrochloride and of the intermediates from the synthesis was investigated. None of them did interfere. By means of mass spectrometry and UV-spectrophotometry, the degradation compounds of mebeverine were identified as veratric acid and as 4-|ethyl-[2-(4-methoxyphenyl)-1-methylethyl]amino| 1-butanol. The stability study proved that mebeverine hydrochloride is very stable in tablets; the tablets still contain more than 95% of the declared drug potency after storage for more than one year at 50°C.Colofac; Duspatal; Duspatalin     

TEQ-value determinations of animal feed; emphasis on the CALUX bioassay validation

Polyhalogenated aromatic hydrocarbons, such as polychlorinated dibenzo-p-dioxins are a large and diverse group of environmental pollutants. Their tendency to accumulate in the food chain and their toxicity make monitoring necessary. The reference analysis method is laborious and very expensive, therefore cheap and rapid bioassays have been developed. The chemical-activated luciferase bioassay (CALUX) bioassay uses a recombinant cell line, which responds to dioxins and dioxin-like molecules with Ah receptor (AhR)-dependent induction of firefly luciferase in a dose related response. The CALUX was tested for its use in the screening of feed. Aliquots of 20 g of enriched feed were extracted with a toluene:methanol mixture (20:4 v/v) and extracts were defatted on 33% H₂SO₄ silica columns and purified on carbon columns. Only the dioxin and furan fraction was analysed, the PCB fraction was discarded. The precision of the method is acceptable and in compliance with an R.S.D. <30% as suggested for cell-based bioassays in the Commission Directive 2002/70/EC of July 2002. The results evidence good agreement between TEQ-values obtained by either CALUX or GC–HRMS. The method is now routinely in use for a feed screening programme designed by the Federal Agency for the Safety of the Food chain. Approximately, 25 samples are analysed weekly. From the obtained results approximately 10% was confirmed by GC–HRMS. The false positive ratio is 1% and no false negatives were found, making the use of the CALUX technology advantageous.     

Quantitative High Resolution Electron Microscopy

 With the resolution becoming sufficient to reveal individual atoms, HREM is now entering the stage where it can compete with X-ray methods to quantitatively determine atomic structures of materials without much prior knowledge, but with the advantage of being applicable to aperiodic objects such as crystal defects. In our view the future electron microscope will be characterised by a large versatility in experimental settings under computer control such as the illumination conditions (TEM-STEM), CBED, detecting conditions (diffraction, image, ptychography) and many other tunable parameters such as focus (g), voltage, spherical aberration (C _s ), beam tilt, etc. Since modern detectors can detect single electrons, also the counting statistics is known. The only limiting factor in the experiment will be the total number of electrons that interact with the object during the experiment due to the limitations in the exposure time or in the object damage. However, instrumental potentialities will never be exploited fully if not guided by an experimental strategy. Here intuitive guidelines can be very deceptive. For instance an image made with the best electron microscope (C _s  = 0) at the best focus (g = 0) from the best object (phase object) would show no contrast at all. Hence, questions such as what is the best C _s , focus, object thickness, etc. can only be answered properly if done using a method of experiment design.     

Micro-structural characterization of black crust and laser cleaning of building stones by micro-Raman and SEM techniques

Research concerning the formation and removal of black crusts on various historical objects is approached from many different angles. The so-called "yellowing effect", observed after laser treatment for cleaning purposes, has also received a lot of attention. Evidence regarding this phenomenon differs considerably and the actual mechanisms are still speculated on by researchers. In an attempt to elucidate the processes involved in the yellowing effect associated with laser cleaning, a new analytical technique has been used to investigate the black crust, a region of the sample cleaned by laser irradiation at 1064 nm and another region of the same sample subjected to further laser irradiation at 355 nm, on a limestone sample from the cathedral of Seville in Spain. Micro-Raman spectrometry offers the advantage of spatial chemical characterization of the stone, based upon its molecular makeup and was performed on the bulk body of the stone. Raman and scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDXS) results indicate that the surfaces cleaned by irradiation at 1064 nm and by double irradiation at 1064 and 355 nm differed in terms of their calcium sulphate, calcium oxalate and iron oxide content, and that this could contribute to the difference in colour observed.     

Thermogravimetric study of polyacrylamide with evolved gas analysis

Dried samples of polyacrylamide in an He atmosphere have been subjected to thermogravimetric analysis in the 30–600°C range, and the evolved gases were monitored by FTIR. Water, ammonia, and small quantities of carbon dioxide are released in the first stages of decomposition (220–340°C), where the polymer chains remain intact and the reaction occurs on the pendant amide groups. In the second stage of decomposition (340–440°C), the majority of the weight loss occurs, and main chain breakdown occurs, releasing carbon dioxide, water, nitrile compounds, and imides. Trapping of the gases in this stage and analysis by GC–FTIR and GC–MS reveals the presence of more than 20 decomposition products, and confirms that a large proportion of these can be assigned to glutarimide and its substituted analogs. Imidization and dehydration reactions on the amide groups, as well as free radical breakdown of the main chains, with inter- and intramolecular hydrogen transfer, can account for many of the products of the decomposition. © 1993 John Wiley & Sons, Inc.     

The non-linear dielectric effect in liquid xenon

The non-linear dielectric effect (NLDE), that is the increase in the dielectric constant divided by the square of the applied field, is measured for a number of non-polar molecular liquids and for liquid xenon. The values of the NLDE are compared with results in the literature and with values predicted by theory. The agreement with other experiments is quite good, but with theory is very poor, the only exception being Liquid xenon, where agreement is good. A possible explanation is given. The prediction that the NLDE should increase strongly near the critical point due to the divergence of the isothermal compressibility could not be established by experiment. The conclusion is drawn that this failure is due to the reduction by the theory of second-order effects to first-order thermodynamic and molecular properties.     

The reaction of propane sultone with cuanosine,adenosine, and related compounds

Propane sultone (3-hydroxypropanesulfonic acid-γ-lactone) which is a monofunctional directacting alkylating carcinogen, has been shown to react irreversibly with DNA from various sources in vitro. It reacts with guanosine in DMSO to yield the N-7 alkyl nucleoside, while reaction with 2′-deoxyguanosine yields the corresponding N-7 alkyl purine. Evidence for the structure of these products and of one formed when adenosine and propane sultone react is presented.     

Absorptiometric determination of microgram amounts of uranium with Rhodamine B

Uranium (VI) can be extracted as a complex with rhodamine B into a benzeneetherhexone solvent from a benzoate buffered solution. Optimum conditions for the colour development are defined, leading to a molar absorptivity of 102700 mmol^-1 cm² at 555 nm, the highest yet reported for a uranium complex. The determination of uranium in the range 0.02–3 μg/ml in nitrate samples is described. The relative standard deviation ranges from 20 to 0.6%. The interference of several ions is investigated.     

Conformations of luteoskyrin and rugulosin in solution

The pigments Luteoskyrin (Ls) and Rugulosin (Rg) might adopt a priori two extreme conformations, a planar and an angular one. To determine the predominant conformation in solution, the nature of the lowest energy transition of the chromophores and the presence of intramolecular H-bonding have been investigated. The solvent effects on electronic absorption and CD spectra indicated the π-π* nature of the lowest energy transition. Treatments of the electronic absorption results according to McRae and Kosower relations, IR absorption and PMR spectra suggested the presence of strong intra-molecular H-bonds. From these results it was concluded that Ls and Rg adopted in a variety of solvents the most planar conformation.     

International Measurement Evaluation Programme: IMEP-9, trace elements in water

The International Measurement Evaluation Programme (IMEP) is an interlaboratory comparison scheme, founded, owned and coordinated by the Institute for Reference Materials and Measurements (IRMM) since 1988. IMEP-9 is the third round of trace elements in water evaluation following IMEP-3 and IMEP-6. Reference values for 15 elements stating total concentrations and combined uncertainties (according to GUM) were established. The reference values were established mainly by isotope dilution mass spectrometry (IDMS) as a primary method of measurement, and values traceable to the SI were obtained. The four elements that could not be certified by IDMS were assigned values by means of other measurement techniques. Results from 201 laboratories from 35 countries and four continents were evaluated against the reference values and the comparability between the laboratories is presented graphically.