Homophymine A, an anti-HIV cyclodepsipeptide from the sponge Homophymia sp

A new anti-HIV cyclodepsipeptide, homophymine A, was isolated from a New Caledonian collection of the marine sponge Homophymia sp. The structure of homophymine A was determined by interpretation of spectroscopic data, acid hydrolysis, and LC-MS analysis. Homophymine A contains 11 amino acid residues and an amide-linked 3-hydroxy-2,4,6-trimethyloctanoic acid moiety. Along with four D-, two L-, and one N-methyl amino acids, it also contains four unusual amino acid residues: (2S,3S,4R)-3,4-diMe-Gln, (2R,3R,4S)-4-amino-2,3-dihydroxy-1,7-heptandioic acid, L-ThrOMe, and (2R,3R,4R)-2-amino-3-hydroxy-4,5-dimethylhexanoic acid. In a cell-based XTT assay, homophymine A exhibited cytoprotective activity against HIV-1 infection with a IC50 of 75 nM.     

Glycolipids from sponges. 20. J-Coupling analysis for stereochemical assignments in furanosides: structure elucidation of vesparioside B, a glycosphingolipid from the marine sponge Spheciospongia vesparia

Reinvestigation of the glycosphingolipid composition of the marine sponge Spheciospongia vesparia revealed the presence of vesparioside B ( 2a), a new furanose-rich hexaglycosylated glycosphingolipid that is the most complex glycosphingolipid isolated from a marine sponge to date. The structure of the new compound was elucidated using extensive 2D NMR studies and chemical degradation. Particularly useful for structure elucidation of vesparioside B was a quantum mechanical computational study, showing that in furanosides a vicinal coupling constant <2.0 Hz (for H-1/H-2 or H-3/H-4) or <3.5 Hz (for H-2/H-3) is a proof of the trans orientation of the relevant protons. This general rule, combined with ROE data, allowed us to elucidate the relative stereochemistry (including anomeric configuration) of the three furanose five-membered rings.     

Pentakis(trifluoromethyl)phenyl, a sterically crowded and electron-withdrawing group: synthesis and acidity of pentakis(trifluoromethyl)benzene, -toluene, -phenol, and -aniline

A general route to functionalized pentakis(trifluoromethyl)phenyl (C6(CF3)5) derivatives, promising building blocks for designing novel stable carbenes, radical species, superacids, weakly coordinating anions and other practically and theoretically useful species, is presented. This pertrifluoromethylation route proceeds via conveniently pregenerated (trifluoromethyl)copper (CF3Cu) species in DMF, stabilized by addition of 1,3-dimethyl-2-imidazolidinone (DMI). These species react with hexaiodobenzene at ambient temperature to give the potassium pentakis(trifluoromethyl)phenoxide along with hexakis(trifluoromethyl)benzene and pentakis(trifluoromethyl)benzene in a combined yield of 80%. A possible reaction pathway explaining the formation of pentakis(trifluoromethyl)phenoxide is proposed. Pentakis(trifluoromethyl)phenol gives rise to easily functionalized pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)aniline. Pertrifluoromethylation of pentaiodochlorobenzene and pentaiodotoluene allows straightforward access to pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)toluene, respectively. XRD structures of several C6(CF3)5 derivatives were determined and compared with the calculated structures. Due to the steric crowding the aromatic rings in all C6(CF3)5 derivatives are significantly distorted. The gas-phase acidities (Delta Gacid) and pKa values in different solvents (acetonitrile (AN), DMSO, water) for the title compounds and a number of related compounds have been measured. The origin of the acidifying effect of the C6(CF3)5 group has been explored using the isodesmic reactions approach.     

Second-order advantage from kinetic-spectroscopic data matrices in the presence of extreme spectral overlapping A multivariate curve resolution--alternating least-squares approach

Multivariate curve resolution coupled to alternating least-squares (MCR-ALS) has been employed to model kinetic-spectroscopic second-order data, with focus on the achievement of the important second-order advantage, under conditions of extreme spectral overlapping among sample components. A series of simulated examples shows that MCR-ALS can conveniently handle the studied analytical problem unlike other second-order multivariate calibration algorithms, provided matrix augmentation is implemented in the spectral mode instead of in the usual kinetic mode. The approach has also been applied to three experimental examples, which involve the determination of: (1) the antiparkinsonian carbidopa (analyte) in the presence of levodopa as a potential interferent, both reacting with cerium (IV) to produce the fluorescent species cerium (III) with different kinetics; (2) Fe(II) (analyte) in the presence of the interferent Zn(II), both catalyzing the oxidation of methyl orange with potassium bromate; and (3) tartrazine (analyte) in the presence of the interferent brilliant blue, both oxidized with potassium bromate, with the interferent leading to a product with an absorption spectrum very similar to tartrazine. The results indicate good analytical performance towards the analytes, despite the intense spectral overlapping and the presence of unexpected constituents in the test samples.     

Spectrofluorimetric determination of benzoimidazolic pesticides: effect of p-sulfonatocalix[6]arene and cyclodextrins

The effect of the addition of a macrocyclic host (H) such as p-sulfonatocalix[6]arene (C6S), native and modified cyclodextrins (CDs), on the fluorescence of benzoimidazolic fungicides (P), like Benomyl (BY) and Carbendazim (CZ), has been studied. The fluorescence of BY in water at pH 1.000 and 25.0 degrees C was increased in the presence of C6S, alphaCD and hydroxypropyl-beta-CD (HPCD). The association constants determined by fluorescence enhancement showed weak interactions (K(A) approximately 10(1) to 10(2) M(-1)) between the fungicide with both CDs, whereas they were stronger with C6S (K(A) approximately 10(5) M(-1)). Molecular recognition of BY for C6S was mainly attributed to electrostatic interactions, and for CDs to the hydrophobic effect and hydrogen bond formation. On the other hand, the fluorescent behaviour of CZ in the presence of C6S at pH 6.994 was interpreted as the formation of two complexes with 1:1 (P:H) and 1:2 (P:H(2)) stoichiometry, the latter being less fluorescent than the free analyte. Relative fluorescence quantum yield ratios between the complexed and free BY (phi(P:H)/phi(P)) were 2.00+/-0.05, 1.40+/-0.03 and 2.8+/-0.4 for C6S, alphaCD and HPCD, respectively. The analytical parameters improved in the presence of C6S and CDs. The best limit of detection (L(D), ng mL(-1)) was 17.4+/-0.8 with HPCD. The proposed method with C6S and HPCD was successfully applied to fortified samples of tap water and orange flesh extract with good recoveries (91-106%) and R.S.D. (< or = 2%) by triplicate analysis. The method is rapid, direct and simple and needs no previous degradation or derivatization reaction.     

Thioflavin T hydroxylation at basic pH and its effect on amyloid fibril detection

The fluorescent dye thioflavin T (ThT) is commonly used for in situ amyloid fibril detection. In this work, we focused on the spectroscopic properties and chemical stability of ThT in aqueous solution as a function of pH, temperature, and dye concentration. A reversible hydroxylation process occurs in alkaline solutions, which was characterized using a combination of UV-vis absorption spectroscopy, proton NMR, and density functional theory (DFT). On the basis of these studies, we propose a chemical structure for the hydroxylated form. Finally, by means of fluorescence spectroscopy, ThT hydroxylation effects on in situ amyloid detection have been investigated, providing new insights on the efficiency of the ThT assay for quantitative fibril evaluation at basic pH.     

Risk Analysis in Transport and Storage of Monomers: An Accident Investigation

Summary: In this work the analysis of an accident in transport of dangerous goods is proposed. The objective of this study is to contribute to the determination of the causes that brought about the self-polymerization of commercial divinylbenzene (DVB 63%) contained in an iso-container, in order to prevent this accident to happen in the future. Time and conditions during transport and storage of monomers (in particular the storage temperature) are very important factors, that affect the self-polymerization aptitude of these substances. To stabilize this monomer, usually 4-tert-Butylcatechol (TBC) is added at a level of 900–1200 ppm by weight to act as an inhibitor to prevent the self-initiated autopolymerization of the material. In particular one hypothesis has been investigated: probably the quantity of oxygen in the tanker was insufficient to activate properly the inhibition mechanism of TBC. From this consideration the self-polymerization of DVB and the inhibition mechanism of TBC have been studied as a function of temperature and monomer exposure to air. Different calorimetric techniques have been applied, in particular Differential Scanning Calorimetry and Adiabatic Calorimetry, to investigate the causes of the accident.     

Convenient diastereospecific synthesis of a rociverine precursor and its resolution by lipase-catalyzed transesterification

(±)-1-Cyclohexyl-c-2-hydroxymethyl-r-1-cyclohexanol 3, a precursor of the antimuscarinic drug Rociverine 1, was obtained diastereospecifically in very high yield, from the Grignard reaction between C₆H₁₁MgCl and an appropriately protected 2-(hydroxymethyl)cyclohexanone. The preparation of enantiomerically enriched cis diol (+)-(1R,2S)-3 and the corresponding 2-acetoxymethyl derivative (+)-(1S,2R)-12 was achieved by lipase PPL-catalyzed transesterification of racemic diol (±)-3.     

Environmental effects on a prion's helix II domain: copper(II) and membrane interactions with PrP180-193 and its analogues

An abnormal interaction between copper and the prion protein is believed to play a pivotal role in the pathogenesis of prion diseases. Copper binding has been mainly attributed to the N-terminal domain of the prion protein, but this hypothesis has recently been challenged in some papers which suggest that the C-terminal domain might also compete for metal anchoring. In particular, the segment corresponding to the helix II region of the prion protein, namely PrP180-193, has been shown both to bind copper and to exhibit a copper-enhanced cytotoxicity, as well as to interact with artificial membranes. The present work is aimed at extending these results by choosing the most representative model of this domain and by determining its copper affinity. With this aim, the different role played by the electrostatic properties of the C- and N-termini of PrP180-193 (VNITIKQHTVTTTT) in determining its conformational behaviour, copper coordination and ability to perturb model membranes was investigated. Owing to the low solubility of PrP180-193, its copper affinity was evaluated by using the shorter PrPAc184-188NH2 (IKQHT) analogue as a model. ESI-MS, ESR, UV/Vis, and CD measurements were carried out on the copper(II)/PrPAc184-188NH2 and copper(II)/PrP180-193NH2 systems, and showed that PrPAc184-188NH2 is a reliable model for the metal interaction with the helix II domain. The affinity of copper(II) for the helix II fragment is higher than that for the octarepeat and PrP106-126 peptides. Finally, the different ability of PrP180-193 analogues to perturb the DPPC model membrane was assessed by DSC measurements. The possible biological consequences of these findings are also discussed briefly.