Paramagnetic defect centers at the MgO surface. An alternative model to oxygen vacancies

On the basis of embedded cluster calculations, we propose a new model for the structure of paramagnetic color centers at the MgO surface usually denoted as F(S)(H)(+) (an electron trapped near an adsorbed proton). These centers are produced by exposing the surface of polycrystalline MgO to H(2) followed by UV irradiation. We demonstrate that properties of H atom absorbed at surface sites such as step edges (MgO(step)) and reverse corner sites (MgO(RC)), formed at the intersection of two step edges, are compatible with a number of features observed for F(S)(H)(+). Our calculations suggest that (i) H(2) dissociates at the reverse corner site heterolytically and that there is no barrier for this exothermic reaction; (ii) the calculated vibrations of the resulting MgO(RC)(H(+))(H(-)) complex are fully consistent with the measured ones; (iii) desorption of a neutral H atom from the diamagnetic precursor requires UV light and leads to the formation of stable neutral paramagnetic centers at the surface, MgO(step)(H(+))(e(-))(trapped) and MgO(RC)(H(+))(e(-))(trapped). The computed isotropic hyperfine coupling constants and optical transitions of these centers are in broad agreement with the existing experimental data. We argue that these centers, which do not belong to the class of "oxygen vacancies", are two of the many possible forms of the F(S)(H)(+) defect center.     

Effects of gemini surfactants on egg phosphatidylcholine bilayers in the fluid lamellar phase

The influence of 1,4-butanediamonium-N,N'-dialkyl-N,N,N',N'-tetramethyl dibromides (CmA, m = 7-16 is the number of alkyl carbons) on the egg yolk phosphatidylcholine (EYPC) bilayer thickness and lipid surface area at the bilayer-aqueous phase interface is studied using X-ray diffraction on fluid lamellar CmA + EYPC + H2O phases as a function of CmA:EYPC and H2O:EYPC molar ratios and the alkyl chain length m. At the constant CmA:EYPC = 0.4 and H2O:EYPC = 18 molar ratios, the CmA induced bilayer thickness decrease shows a minimum and the lipid surface area increase a maximum at the alkyl chain length m = 9. The obtained results are discussed in the context of a structural perturbation model of the cut-off effect in biological potencies of surfactants which occurs when increasing the alkyl substituent chain length above the critical value.     

On the equivalence of conformational and enantiomeric changes of atomic configuration for vibrational circular dichroism signs

We study systematically the vibrational circular dichroism (VCD) spectra of the conformers of a simple chiral molecule, with one chiral carbon and an "achiral" alkyl substituent of varying length. The vibrational modes can be divided into a group involving the chiral center and its direct neighbors and the modes of the achiral substituent. Conformational changes that consist of rotations around the bond from the next-nearest neighbor to the following carbon, and bond rotations further in the chain, do not affect the modes around the chiral center. However, conformational changes within the chiral fragment have dramatic effects, often reversing the sign of the rotational strength. The equivalence of the effect of enantiomeric change of the atomic configuration and conformational change on the VCD sign (rotational strength) is studied. It is explained as an effect of atomic characteristics, such as the nuclear amplitudes in some vibrational modes as well as the atomic polar and axial tensors, being to a high degree determined by the local topology of the atomic configuration. They reflect the local physics of the electron motions that generate the chemical bonds rather than the overall shape of the molecule.     

Theoretical Treatment of a Cathodic Stripping Mechanism of an Insoluble Salt Coupled with a Chemical Reaction in Conditions of Square Wave Voltammetry. Application to 6‐Mercaptopurine‐9‐D‐Riboside in the Presence of Ni(II)

Cathodic stripping mechanism of an insoluble salt coupled with a homogenous chemical reaction is considered both theoretically and experimentally under conditions of square‐wave voltammetry. For the mercury electrode in aqueous solution, the electrode reaction is described as L(aq)+Hg(l)=HgL(s)+2e^?, where L(aq) is the reactive ligand that forms a sparingly soluble compound HgL(s). The electrode reaction is coupled with a homogenous, first‐order chemical reaction, A(aq)=L(aq). Theoretical predictions are confirmed by experiments with 6‐mercaptopurine‐9‐D‐riboside in the presence of nickel(II) ions.     

Acidity of Alginate Aerogels Studied by FTIR Spectroscopy of Probe Molecules

Supercritical drying of alginate gels is an efficient way to prepare aerogels with high surface area (>300 m² · g⁻¹). FTIR spectroscopy allows to monitor the adsorption of NH₃ from the gas phase onto the acid sites of the alginate. Free carboxylic groups are effective Brønsted sites, whereas the divalent cations used in the ionotropic gelation present the properties of Lewis sites. The ratio between Brønsted and Lewis sites provides infomation on the role of pH in alginate gelation and suggests that non-buffered gelation by transition-metal cations is a mixed ionotropic-acid process.     

O2 interaction and reactivity on a model hydroxylated rutile(110) surface

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.     

Electrochemical dissolution of magnetite in acid solutions

The present paper deals with the electrochemical behavior of magnetite microcrystals in an acid medium. A voltammetric method employing a carbon-paste electroactive electrode (CPEE) with an organic binder was used. It was found that the cathodic voltammograms, which were recorded at different scan rates, formed a set bounded in the space of i–E parameters by a generalizing voltammetric curve corresponding to the effective potential scan rate _eff. In other words, all curves are situated under one enveloping curve, just as the smaller dolls sit in the largest doll of a Russian doll. Reverse currents (a cathodic current in the anodic direction of the potential scan) were observed on the cyclic voltammogram. Forward and reverse currents obey the same laws and have one and the same generalizing curve, which could be taken as the magnetite characteristic.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Redox kinetic measurements of glutathione at the mercury electrode by means of square-wave voltammetry. The role of copper, cadmium and zinc ions

The electrode reaction of glutathione (GSH) at the hanging mercury drop electrode is studied by means of square-wave voltammetry (SWV). At potentials more positive than -0.350 V (vs. Ag/AgCl (3 mol/l KCl)) the oxidation of the mercury electrode in the presence of GSH leads to creation of a sparingly soluble mercury-GSH complex that deposits onto the electrode surface. Under cathodic potential scan, the deposited complex acts as a reducible reactant, giving raise to a well-defined cathodic stripping reversible SW voltammetric response. The electrode reaction can be described by the scheme: Hg(SG)(2(s))+e(-)+2H((aq))(+) = Hg((l))+2GSH((aq)). Thus, the electrode reaction provides information on both thermodynamics and kinetics of the chemical interactions of GSH with mercury. An experimental methodology for measuring the kinetics of the electrode reactions, based on the property known as "quasireversible maximum", is developed. The standard redox rate constant is 5.09, 5.75 and 5.22 cm s(-1) in a phosphate buffer at pH 5.6, 7.0 and 8.5, respectively, with a precision of +/-10%. The high rate of the electrode reaction reflects the strong affinity of GSH towards chemical interaction with mercury. The electrode reaction is particularly sensitive to the presence of heavy metal ions such as Cu(2+), Cd(2+), and Zn(2+.) The rate of the electrode reaction decreases significantly in the presence of these ions due to simultaneous interactions of GSH with the respective ion and mercury.     

Development of a stabilized low temperature infrared absorption cell for use in low temperature and collisional cooling experiments

We have constructed a stabilized low temperature infrared absorption cell cooled by an open cycle refrigerator, which can run with liquid nitrogen from 250 to 80K or with liquid helium from 80K to a few kelvin. Several CO infrared spectra were recorded at low temperature using a tunable diode laser spectrometer. These spectra were analyzed taking into account the detailed effects of collisions on the line profile when the pressure increases. We also recorded spectra at very low pressure to accurately model the diode laser emission. Spectra of the R(2) line in the fundamental band of 13CO cooled by collisions with helium buffer gas at 10.5K and at pressures near 1 Torr have been recorded. The He-pressure broadening parameter (gamma(0) = 0.3 cm(-1) atm(-1)) has been derived from the simultaneous analysis of four spectra at different pressures.