Sensitization of Niobium Pentoxide Thin Films by cis-Dithiocyanate (2,2-bipyridyl-4,4′dicarboxylic acid) Ruthenium(II) Complex

The sensitization caused by the adsorption of a ruthenium complex in a niobium thin film (d < 300 nm) was analysed by photoelectrochemical measurements. The films were coated on a indium-tin-oxide (ITO) conductor glass by a dip-coating technique. The non-sensitized film had only photoelectrochemical current in the UV region (i 40 nA). The sensitization of the film by cis-dithiocyanate (2,2-bipyridyl-4,4dicarboxylic acid) ruthenium(II) complex altered the shape of the non-normalized action spectrum with the presence of photoelectrochemical current in the visible range ( 400 nm). This photoelectrochemical current (i 70 nA) was associated with electron injection into the niobium pentoxide conduction band due to metal-to-ligand charge-transfer (MLCT) of the ruthenium complex. The shape of the action spectrum in the UV range ( 400 nm) changed with the application of an electric potential to the film surface and the photoelectrochemical current associated with the ligand-to-metal charge transfer of niobia film decreased for higher ruthenium concentration.     

Determination of apparent reducing sugars, moisture and acidity in honey by attenuated total reflectance-Fourier transform infrared spectrometry

Attenuated total reflectance-Fourier transform infrared spectrometry, in conjunction with multivariate calibration, was used for determination of reducing sugars, humidity and acidity in honey bee samples. Multivariate calibration models were built using partial least squares (PLS) and were refined through variable selection per interval (iPLS) and genetic algorithms. The calibration models show satisfactory results for all parameters with average relative errors of 6% for acidity, 1% for reducing sugars and 2% for humidity. For the acidity and reducing sugars parameters, variable selection was irrelevant, but for humidity it was essential. For the humidity parameter, it was necessary to use two variable selection techniques (by intervals and genetic algorithm) concomitantly in order to obtain a satisfactory calibration model.     

Destruction of Organic Compounds in a High-Frequency Discharge Plasma at Reduced Pressure

Plasma Chemistry and Plasma Processing - Conditions of the destruction of organic compounds in a hf discharge plasma at reduced pressure and parameters of this plasma type are determined. The...     

Activation of carbon dioxide by bicyclic amidines

Activation of the carbon dioxide molecule was achieved using bicyclic amidines (DBU, PMDBD, and DBN). The solution reaction of CO(2) with amidines yielded the corresponding zwitterionic complexes through the formation of a N-CO(2) bond. (13)C NMR data confirmed the carbamic nature of the carbamic zwitterions, DBU-CO(2) and PMDBD-CO(2). However, when these adducts were crystallized, the X-ray analyses of the single crystals were in agreement with bisamidinium bicarbonate salt structures, indicating that structural changes occurred in the crystallization process. The elemental and thermogravimetric analysis data for the carbamic zwitterions, DBU-CO(2) and PMDBD-CO(2), initially obtained by the direct reaction of amidines with CO(2), suggest that these molecules are probably associated with one molecule of water by hydrogen-bond formation (amidinium(+)-COO(-)...H(2)O). A correlation was observed between the thermal stability and the transcarboxylating activity for the amidine-CO(2) complexes. Theoretical calculations of hardness were performed at the B3LYP/cc-pVTZ level of theory and showed concordance with the experimental reactivity of DBU and PMDBD toward CO(2).     

Thallium trinitrate mediated oxidation of 3-alkenols: ring contraction vs cyclization

The reaction of a series of six-membered ring 3-alkenols with thallium trinitrate (TTN) in three different experimental conditions was studied. Either cyclization products or ring contraction products were obtained, depending on the structure of the substrate as well as the nature of the solvent. The reaction of a seven-membered ring 3-alkenol with TTN led to the ring contraction product exclusively.     

Voltammetric determination of N-acetylcysteine using a carbon paste electrode modified with copper(II) hexacyanoferrate(III)

The preparation and electrochemical characterization of a carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) as well as its behavior as electrocatalyst toward the oxidation of N-acetylcysteine were investigated. The electrochemical behavior of the modified electrode and the electrooxidation of N-acetylcysteine were explored using sweep linear voltammetry. The best voltammetric response was observed for a paste composition of 20% (w/w) copper(II) hexacyanoferrate(III) complex, acetate buffer solution at pH of 6.0 as the electrolyte and scan rate of 10 mV s^− 1. A linear voltammetric response for N-acetylcysteine was obtained in the concentration range from 1.2 × 10^− 4 to 8.3 × 10^− 4 mol L^− 1, with a detection limit of 6.3 × 10^− 5 mol L^− 1. The proposed electrode is useful for the quality control and routine analysis of N-acetylcysteine in pharmaceutical formulations.     

Oxidation of glucose to gluconic acid by glucose oxidase in a membrane bioreactor

Glucose oxidase (GO) (EC 1.1.3.4) was used as catalyst for oxidizing glucose into gluconic acid utilizing a 10-mL Bioengineering Enzyme Membrane Reactor® or a 400-mL Millipore Stirred Ultrafiltration Cell (MSUC) coupled with a Millipore UF membrane (cutoff of 100 kDa) and operated for 12 h under an agitation of 100 rpm, pH 5.5, and 30°C. The effect of feeding rate (0.10, 0.15, or 0.20 min^?1), glucose (2.5 or 5.0 mM), and GO (1.0 or 2.0 mg/mL) concentrations on the catalysis were studied. A yield of about 75% was attained when the MSUC filled with 1.0 mg/mL of GO was fed with 2.5 mM glucose solution at a rate of 0.15 min^?1.     

Carbon paste electrode modified with copper(II) phosphate immobilized in a polyester resin for voltammetric determination of <Emphasis Type="SmallCaps"> l </Emphasis>-ascorbic acid in pharmaceutical formulations

A carbon paste electrode modified with copper(II) phosphate immobilized in a polyester resin (CuP-Poly) is proposed for voltammetric determination of L-ascorbic acid in pharmaceutical formulations. The modified electrode allows the detection of L-ascorbic acid at lower anodic potentials than observed at unmodified electrodes. Several parameters that can influence the voltammetric response of the proposed electrode such as carbon paste composition, pH, scan rate, and possible interference were investigated. The peak current was proportional to the concentration of ascorbic acid in the range 2.0 x 10(-5) to 3.2 x 10(-3) mol L(-1) with a detection limit of 1.0 x 10(-5) mol L(-1). The stability and repeatability of the electrode for the determination of L-ascorbic acid are also discussed. Amperometric response was also recorded for electrocatalytic oxidation of the L-ascorbic acid. Concentrations of the vitamin C in pharmaceutical formulations (tablets) measured using the modified electrode and a titrimetric method are in agreement at the 95% confidence level and within an acceptable range of error.     

FIA Amperometric Determination of Molybdenum(VI) Based on the Catalysis of the Hydrogen Peroxide-Iodide Reaction

An analytical approach to FIA amperometric determination of molybdenum based on the well-known catalytic reaction involving the oxidation of iodide by hydrogen peroxide is proposed. The indirect method involves measurements of triiodide at a glassy carbon electrode polarised at +0.2V in a flow-through configuration. The limit of detection was found to be 6×10^–9molL^–1, and the dynamic concentration range was established as 1×10^–7molL^–1 to 5×10^–5molL^–1. The repeatability of measurements was determined as 2.1% (n = 20). The amount of Mo in a steel sample was determined after removing the additive interference from iron by using fluoride ions, and the results were in good agreement with the certified value. Interference of other metallic ions is addressed.     

Study of the conformation of γ-zeins in purified maize protein bodies by FTIR and NMR spectroscopy

The γ-zeins are a mixture of 16, 27, and 50-kDa polypeptides which are important in the formation and stabilization of protein bodies (PB). These organelles are used for deposition of zeins, the water-insoluble storage proteins in maize. The nature of the physical interaction between proteins in the assembly and stabilization of PB are fairly well known. It is suggested the repeated hexapeptide sequence (PPPVHL)₈ in the N-terminus is responsible for aggregation of the γ-zeins on the PB surface. Despite this importance, there is little information about the native conformation of γ-zeins. In this work, we have analyzed the secondary structures of γ-zeins in purified protein bodies from two maize cultivars, in the solid state, by FTIR and NMR spectroscopy. The results revealed that γ-zeins in their physiological state are comprise similar proportions of α-helix and β-sheet, 33 and 31% as determined by FTIR. It was not possible to state if the polyproline II (PPII) conformation is present in the solid-state structure of γ-zeins, as has been demonstrated for the hexapeptide in solution. Because of the similarity of the solid-state NMR spectra of γ and α-zeins in the α carbon region we attributed their contributions to the β-sheet structures rather than to the PPII conformation or a mixture of these extended structures.